# GNU Make

## May 1998

Richard M. Stallman and Roland McGrath

@shorttitlepage GNU Make Copyright (C) 1988, '89, '90, '91, '92, '93, '94, '95, '96, '97 Free Software Foundation, Inc.

59 Temple Place -- Suite 330,
Boston, MA 02111-1307 USA
Printed copies are available for $20 each. ISBN 1-882114-80-9 Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Free Software Foundation. Cover art by Etienne Suvasa. # Overview of make The make utility automatically determines which pieces of a large program need to be recompiled, and issues commands to recompile them. This manual describes GNU make, which was implemented by Richard Stallman and Roland McGrath. GNU make conforms to section 6.2 of IEEE Standard 1003.2-1992 (POSIX.2). Our examples show C programs, since they are most common, but you can use make with any programming language whose compiler can be run with a shell command. Indeed, make is not limited to programs. You can use it to describe any task where some files must be updated automatically from others whenever the others change. To prepare to use make, you must write a file called the makefile that describes the relationships among files in your program and provides commands for updating each file. In a program, typically, the executable file is updated from object files, which are in turn made by compiling source files. Once a suitable makefile exists, each time you change some source files, this simple shell command: make  suffices to perform all necessary recompilations. The make program uses the makefile data base and the last-modification times of the files to decide which of the files need to be updated. For each of those files, it issues the commands recorded in the data base. You can provide command line arguments to make to control which files should be recompiled, or how. See section How to Run make. ## How to Read This Manual If you are new to make, or are looking for a general introduction, read the first few sections of each chapter, skipping the later sections. In each chapter, the first few sections contain introductory or general information and the later sections contain specialized or technical information. The exception is section An Introduction to Makefiles, all of which is introductory. If you are familiar with other make programs, see section Features of GNU make, which lists the enhancements GNU make has, and section Incompatibilities and Missing Features, which explains the few things GNU make lacks that others have. For a quick summary, see section Summary of Options, section Quick Reference, and section Special Built-in Target Names. ## Problems and Bugs If you have problems with GNU make or think you've found a bug, please report it to the developers; we cannot promise to do anything but we might well want to fix it. Before reporting a bug, make sure you've actually found a real bug. Carefully reread the documentation and see if it really says you can do what you're trying to do. If it's not clear whether you should be able to do something or not, report that too; it's a bug in the documentation! Before reporting a bug or trying to fix it yourself, try to isolate it to the smallest possible makefile that reproduces the problem. Then send us the makefile and the exact results make gave you. Also say what you expected to occur; this will help us decide whether the problem was really in the documentation. Once you've got a precise problem, please send electronic mail to:  bug-make@gnu.org  Please include the version number of make you are using. You can get this information with the command make --version'. Be sure also to include the type of machine and operating system you are using. If possible, include the contents of the file config.h' that is generated by the configuration process. # An Introduction to Makefiles You need a file called a makefile to tell make what to do. Most often, the makefile tells make how to compile and link a program. In this chapter, we will discuss a simple makefile that describes how to compile and link a text editor which consists of eight C source files and three header files. The makefile can also tell make how to run miscellaneous commands when explicitly asked (for example, to remove certain files as a clean-up operation). To see a more complex example of a makefile, see section Complex Makefile Example. When make recompiles the editor, each changed C source file must be recompiled. If a header file has changed, each C source file that includes the header file must be recompiled to be safe. Each compilation produces an object file corresponding to the source file. Finally, if any source file has been recompiled, all the object files, whether newly made or saved from previous compilations, must be linked together to produce the new executable editor. ## What a Rule Looks Like A simple makefile consists of "rules" with the following shape: target ... : dependencies ... command ... ...  A target is usually the name of a file that is generated by a program; examples of targets are executable or object files. A target can also be the name of an action to carry out, such as clean' (see section Phony Targets). A dependency is a file that is used as input to create the target. A target often depends on several files. A command is an action that make carries out. A rule may have more than one command, each on its own line. Please note: you need to put a tab character at the beginning of every command line! This is an obscurity that catches the unwary. Usually a command is in a rule with dependencies and serves to create a target file if any of the dependencies change. However, the rule that specifies commands for the target need not have dependencies. For example, the rule containing the delete command associated with the target clean' does not have dependencies. A rule, then, explains how and when to remake certain files which are the targets of the particular rule. make carries out the commands on the dependencies to create or update the target. A rule can also explain how and when to carry out an action. See section Writing Rules. A makefile may contain other text besides rules, but a simple makefile need only contain rules. Rules may look somewhat more complicated than shown in this template, but all fit the pattern more or less. ## A Simple Makefile Here is a straightforward makefile that describes the way an executable file called edit depends on eight object files which, in turn, depend on eight C source and three header files. In this example, all the C files include defs.h', but only those defining editing commands include command.h', and only low level files that change the editor buffer include buffer.h'. edit : main.o kbd.o command.o display.o \ insert.o search.o files.o utils.o cc -o edit main.o kbd.o command.o display.o \ insert.o search.o files.o utils.o main.o : main.c defs.h cc -c main.c kbd.o : kbd.c defs.h command.h cc -c kbd.c command.o : command.c defs.h command.h cc -c command.c display.o : display.c defs.h buffer.h cc -c display.c insert.o : insert.c defs.h buffer.h cc -c insert.c search.o : search.c defs.h buffer.h cc -c search.c files.o : files.c defs.h buffer.h command.h cc -c files.c utils.o : utils.c defs.h cc -c utils.c clean : rm edit main.o kbd.o command.o display.o \ insert.o search.o files.o utils.o  We split each long line into two lines using backslash-newline; this is like using one long line, but is easier to read. To use this makefile to create the executable file called edit', type: make  To use this makefile to delete the executable file and all the object files from the directory, type: make clean  In the example makefile, the targets include the executable file edit', and the object files main.o' and kbd.o'. The dependencies are files such as main.c' and defs.h'. In fact, each .o' file is both a target and a dependency. Commands include cc -c main.c' and cc -c kbd.c'. When a target is a file, it needs to be recompiled or relinked if any of its dependencies change. In addition, any dependencies that are themselves automatically generated should be updated first. In this example, edit' depends on each of the eight object files; the object file main.o' depends on the source file main.c' and on the header file defs.h'. A shell command follows each line that contains a target and dependencies. These shell commands say how to update the target file. A tab character must come at the beginning of every command line to distinguish commands lines from other lines in the makefile. (Bear in mind that make does not know anything about how the commands work. It is up to you to supply commands that will update the target file properly. All make does is execute the commands in the rule you have specified when the target file needs to be updated.) The target clean' is not a file, but merely the name of an action. Since you normally do not want to carry out the actions in this rule, clean' is not a dependency of any other rule. Consequently, make never does anything with it unless you tell it specifically. Note that this rule not only is not a dependency, it also does not have any dependencies, so the only purpose of the rule is to run the specified commands. Targets that do not refer to files but are just actions are called phony targets. See section Phony Targets, for information about this kind of target. See section Errors in Commands, to see how to cause make to ignore errors from rm or any other command. ## How make Processes a Makefile By default, make starts with the first target (not targets whose names start with .'). This is called the default goal. (Goals are the targets that make strives ultimately to update. See section Arguments to Specify the Goals.) In the simple example of the previous section, the default goal is to update the executable program edit'; therefore, we put that rule first. Thus, when you give the command: make  make reads the makefile in the current directory and begins by processing the first rule. In the example, this rule is for relinking edit'; but before make can fully process this rule, it must process the rules for the files that edit' depends on, which in this case are the object files. Each of these files is processed according to its own rule. These rules say to update each .o' file by compiling its source file. The recompilation must be done if the source file, or any of the header files named as dependencies, is more recent than the object file, or if the object file does not exist. The other rules are processed because their targets appear as dependencies of the goal. If some other rule is not depended on by the goal (or anything it depends on, etc.), that rule is not processed, unless you tell make to do so (with a command such as make clean). Before recompiling an object file, make considers updating its dependencies, the source file and header files. This makefile does not specify anything to be done for them--the .c' and .h' files are not the targets of any rules--so make does nothing for these files. But make would update automatically generated C programs, such as those made by Bison or Yacc, by their own rules at this time. After recompiling whichever object files need it, make decides whether to relink edit'. This must be done if the file edit' does not exist, or if any of the object files are newer than it. If an object file was just recompiled, it is now newer than edit', so edit' is relinked. Thus, if we change the file insert.c' and run make, make will compile that file to update insert.o', and then link edit'. If we change the file command.h' and run make, make will recompile the object files kbd.o', command.o' and files.o' and then link the file edit'. ## Variables Make Makefiles Simpler In our example, we had to list all the object files twice in the rule for edit' (repeated here): edit : main.o kbd.o command.o display.o \ insert.o search.o files.o utils.o cc -o edit main.o kbd.o command.o display.o \ insert.o search.o files.o utils.o  Such duplication is error-prone; if a new object file is added to the system, we might add it to one list and forget the other. We can eliminate the risk and simplify the makefile by using a variable. Variables allow a text string to be defined once and substituted in multiple places later (see section How to Use Variables). It is standard practice for every makefile to have a variable named objects, OBJECTS, objs, OBJS, obj, or OBJ which is a list of all object file names. We would define such a variable objects with a line like this in the makefile: objects = main.o kbd.o command.o display.o \ insert.o search.o files.o utils.o  Then, each place we want to put a list of the object file names, we can substitute the variable's value by writing $(objects)' (see section How to Use Variables).

Here is how the complete simple makefile looks when you use a variable for the object files:

objects = main.o kbd.o command.o display.o \
insert.o search.o files.o utils.o

edit : $(objects) cc -o edit$(objects)
main.o : main.c defs.h
cc -c main.c
kbd.o : kbd.c defs.h command.h
cc -c kbd.c
command.o : command.c defs.h command.h
cc -c command.c
display.o : display.c defs.h buffer.h
cc -c display.c
insert.o : insert.c defs.h buffer.h
cc -c insert.c
search.o : search.c defs.h buffer.h
cc -c search.c
files.o : files.c defs.h buffer.h command.h
cc -c files.c
utils.o : utils.c defs.h
cc -c utils.c
clean :
rm edit $(objects)  ## Letting make Deduce the Commands It is not necessary to spell out the commands for compiling the individual C source files, because make can figure them out: it has an implicit rule for updating a .o' file from a correspondingly named .c' file using a cc -c' command. For example, it will use the command cc -c main.c -o main.o' to compile main.c' into main.o'. We can therefore omit the commands from the rules for the object files. See section Using Implicit Rules. When a .c' file is used automatically in this way, it is also automatically added to the list of dependencies. We can therefore omit the .c' files from the dependencies, provided we omit the commands. Here is the entire example, with both of these changes, and a variable objects as suggested above: objects = main.o kbd.o command.o display.o \ insert.o search.o files.o utils.o edit :$(objects)
cc -o edit $(objects) main.o : defs.h kbd.o : defs.h command.h command.o : defs.h command.h display.o : defs.h buffer.h insert.o : defs.h buffer.h search.o : defs.h buffer.h files.o : defs.h buffer.h command.h utils.o : defs.h .PHONY : clean clean : -rm edit$(objects)


This is how we would write the makefile in actual practice. (The complications associated with clean' are described elsewhere. See section Phony Targets, and section Errors in Commands.)

Because implicit rules are so convenient, they are important. You will see them used frequently.

## Another Style of Makefile

When the objects of a makefile are created only by implicit rules, an alternative style of makefile is possible. In this style of makefile, you group entries by their dependencies instead of by their targets. Here is what one looks like:

objects = main.o kbd.o command.o display.o \
insert.o search.o files.o utils.o

edit : $(objects) cc -o edit$(objects)

$(objects) : defs.h kbd.o command.o files.o : command.h display.o insert.o search.o files.o : buffer.h  Here defs.h' is given as a dependency of all the object files; command.h' and buffer.h' are dependencies of the specific object files listed for them. Whether this is better is a matter of taste: it is more compact, but some people dislike it because they find it clearer to put all the information about each target in one place. ## Rules for Cleaning the Directory Compiling a program is not the only thing you might want to write rules for. Makefiles commonly tell how to do a few other things besides compiling a program: for example, how to delete all the object files and executables so that the directory is clean'. Here is how we could write a make rule for cleaning our example editor: clean: rm edit$(objects)


In practice, we might want to write the rule in a somewhat more complicated manner to handle unanticipated situations. We would do this:

.PHONY : clean
clean :
-rm edit $(objects)  This prevents make from getting confused by an actual file called clean' and causes it to continue in spite of errors from rm. (See section Phony Targets, and section Errors in Commands.) A rule such as this should not be placed at the beginning of the makefile, because we do not want it to run by default! Thus, in the example makefile, we want the rule for edit, which recompiles the editor, to remain the default goal. Since clean is not a dependency of edit, this rule will not run at all if we give the command make' with no arguments. In order to make the rule run, we have to type make clean'. See section How to Run make. # Writing Makefiles The information that tells make how to recompile a system comes from reading a data base called the makefile. ## What Makefiles Contain Makefiles contain five kinds of things: explicit rules, implicit rules, variable definitions, directives, and comments. Rules, variables, and directives are described at length in later chapters. • An explicit rule says when and how to remake one or more files, called the rule's targets. It lists the other files that the targets depend on, and may also give commands to use to create or update the targets. See section Writing Rules. • An implicit rule says when and how to remake a class of files based on their names. It describes how a target may depend on a file with a name similar to the target and gives commands to create or update such a target. See section Using Implicit Rules. • A variable definition is a line that specifies a text string value for a variable that can be substituted into the text later. The simple makefile example shows a variable definition for objects as a list of all object files (see section Variables Make Makefiles Simpler). • A directive is a command for make to do something special while reading the makefile. These include: • #' in a line of a makefile starts a comment. It and the rest of the line are ignored, except that a trailing backslash not escaped by another backslash will continue the comment across multiple lines. Comments may appear on any of the lines in the makefile, except within a define directive, and perhaps within commands (where the shell decides what is a comment). A line containing just a comment (with perhaps spaces before it) is effectively blank, and is ignored. ## What Name to Give Your Makefile By default, when make looks for the makefile, it tries the following names, in order: GNUmakefile', makefile' and Makefile'. Normally you should call your makefile either makefile' or Makefile'. (We recommend Makefile' because it appears prominently near the beginning of a directory listing, right near other important files such as README'.) The first name checked, GNUmakefile', is not recommended for most makefiles. You should use this name if you have a makefile that is specific to GNU make, and will not be understood by other versions of make. Other make programs look for makefile' and Makefile', but not GNUmakefile'. If make finds none of these names, it does not use any makefile. Then you must specify a goal with a command argument, and make will attempt to figure out how to remake it using only its built-in implicit rules. See section Using Implicit Rules. If you want to use a nonstandard name for your makefile, you can specify the makefile name with the -f' or --file' option. The arguments -f name' or --file=name' tell make to read the file name as the makefile. If you use more than one -f' or --file' option, you can specify several makefiles. All the makefiles are effectively concatenated in the order specified. The default makefile names GNUmakefile', makefile' and Makefile' are not checked automatically if you specify -f' or --file'. ## Including Other Makefiles The include directive tells make to suspend reading the current makefile and read one or more other makefiles before continuing. The directive is a line in the makefile that looks like this: include filenames...  filenames can contain shell file name patterns. Extra spaces are allowed and ignored at the beginning of the line, but a tab is not allowed. (If the line begins with a tab, it will be considered a command line.) Whitespace is required between include and the file names, and between file names; extra whitespace is ignored there and at the end of the directive. A comment starting with #' is allowed at the end of the line. If the file names contain any variable or function references, they are expanded. See section How to Use Variables. For example, if you have three .mk' files, a.mk', b.mk', and c.mk', and $(bar) expands to bish bash, then the following expression

include foo *.mk $(bar)  is equivalent to include foo a.mk b.mk c.mk bish bash  When make processes an include directive, it suspends reading of the containing makefile and reads from each listed file in turn. When that is finished, make resumes reading the makefile in which the directive appears. One occasion for using include directives is when several programs, handled by individual makefiles in various directories, need to use a common set of variable definitions (see section Setting Variables) or pattern rules (see section Defining and Redefining Pattern Rules). Another such occasion is when you want to generate dependencies from source files automatically; the dependencies can be put in a file that is included by the main makefile. This practice is generally cleaner than that of somehow appending the dependencies to the end of the main makefile as has been traditionally done with other versions of make. See section Generating Dependencies Automatically. If the specified name does not start with a slash, and the file is not found in the current directory, several other directories are searched. First, any directories you have specified with the -I' or --include-dir' option are searched (see section Summary of Options). Then the following directories (if they exist) are searched, in this order: prefix/include' (normally /usr/local/include' (1)) /usr/gnu/include', /usr/local/include', /usr/include'. If an included makefile cannot be found in any of these directories, a warning message is generated, but it is not an immediately fatal error; processing of the makefile containing the include continues. Once it has finished reading makefiles, make will try to remake any that are out of date or don't exist. See section How Makefiles Are Remade. Only after it has tried to find a way to remake a makefile and failed, will make diagnose the missing makefile as a fatal error. If you want make to simply ignore a makefile which does not exist and cannot be remade, with no error message, use the -include directive instead of include, like this: -include filenames...  This is acts like include in every way except that there is no error (not even a warning) if any of the filenames do not exist. For compatibility with some other make implementations, sinclude is another name for -include. ## The Variable MAKEFILES If the environment variable MAKEFILES is defined, make considers its value as a list of names (separated by whitespace) of additional makefiles to be read before the others. This works much like the include directive: various directories are searched for those files (see section Including Other Makefiles). In addition, the default goal is never taken from one of these makefiles and it is not an error if the files listed in MAKEFILES are not found. The main use of MAKEFILES is in communication between recursive invocations of make (see section Recursive Use of make). It usually is not desirable to set the environment variable before a top-level invocation of make, because it is usually better not to mess with a makefile from outside. However, if you are running make without a specific makefile, a makefile in MAKEFILES can do useful things to help the built-in implicit rules work better, such as defining search paths (see section Searching Directories for Dependencies). Some users are tempted to set MAKEFILES in the environment automatically on login, and program makefiles to expect this to be done. This is a very bad idea, because such makefiles will fail to work if run by anyone else. It is much better to write explicit include directives in the makefiles. See section Including Other Makefiles. ## How Makefiles Are Remade Sometimes makefiles can be remade from other files, such as RCS or SCCS files. If a makefile can be remade from other files, you probably want make to get an up-to-date version of the makefile to read in. To this end, after reading in all makefiles, make will consider each as a goal target and attempt to update it. If a makefile has a rule which says how to update it (found either in that very makefile or in another one) or if an implicit rule applies to it (see section Using Implicit Rules), it will be updated if necessary. After all makefiles have been checked, if any have actually been changed, make starts with a clean slate and reads all the makefiles over again. (It will also attempt to update each of them over again, but normally this will not change them again, since they are already up to date.) If the makefiles specify a double-colon rule to remake a file with commands but no dependencies, that file will always be remade (see section Double-Colon Rules). In the case of makefiles, a makefile that has a double-colon rule with commands but no dependencies will be remade every time make is run, and then again after make starts over and reads the makefiles in again. This would cause an infinite loop: make would constantly remake the makefile, and never do anything else. So, to avoid this, make will not attempt to remake makefiles which are specified as double-colon targets but have no dependencies. If you do not specify any makefiles to be read with -f' or --file' options, make will try the default makefile names; see section What Name to Give Your Makefile. Unlike makefiles explicitly requested with -f' or --file' options, make is not certain that these makefiles should exist. However, if a default makefile does not exist but can be created by running make rules, you probably want the rules to be run so that the makefile can be used. Therefore, if none of the default makefiles exists, make will try to make each of them in the same order in which they are searched for (see section What Name to Give Your Makefile) until it succeeds in making one, or it runs out of names to try. Note that it is not an error if make cannot find or make any makefile; a makefile is not always necessary. When you use the -t' or --touch' option (see section Instead of Executing the Commands), you would not want to use an out-of-date makefile to decide which targets to touch. So the -t' option has no effect on updating makefiles; they are really updated even if -t' is specified. Likewise, -q' (or --question') and -n' (or --just-print') do not prevent updating of makefiles, because an out-of-date makefile would result in the wrong output for other targets. Thus, make -f mfile -n foo' will update mfile', read it in, and then print the commands to update foo' and its dependencies without running them. The commands printed for foo' will be those specified in the updated contents of mfile'. However, on occasion you might actually wish to prevent updating of even the makefiles. You can do this by specifying the makefiles as goals in the command line as well as specifying them as makefiles. When the makefile name is specified explicitly as a goal, the options -t' and so on do apply to them. Thus, make -f mfile -n mfile foo' would read the makefile mfile', print the commands needed to update it without actually running them, and then print the commands needed to update foo' without running them. The commands for foo' will be those specified by the existing contents of mfile'. ## Overriding Part of Another Makefile Sometimes it is useful to have a makefile that is mostly just like another makefile. You can often use the include' directive to include one in the other, and add more targets or variable definitions. However, if the two makefiles give different commands for the same target, make will not let you just do this. But there is another way. In the containing makefile (the one that wants to include the other), you can use a match-anything pattern rule to say that to remake any target that cannot be made from the information in the containing makefile, make should look in another makefile. See section Defining and Redefining Pattern Rules, for more information on pattern rules. For example, if you have a makefile called Makefile' that says how to make the target foo' (and other targets), you can write a makefile called GNUmakefile' that contains: foo: frobnicate > foo %: force @$(MAKE) -f Makefile $@ force: ;  If you say make foo', make will find GNUmakefile', read it, and see that to make foo', it needs to run the command frobnicate > foo'. If you say make bar', make will find no way to make bar' in GNUmakefile', so it will use the commands from the pattern rule: make -f Makefile bar'. If Makefile' provides a rule for updating bar', make will apply the rule. And likewise for any other target that GNUmakefile' does not say how to make. The way this works is that the pattern rule has a pattern of just %', so it matches any target whatever. The rule specifies a dependency force', to guarantee that the commands will be run even if the target file already exists. We give force' target empty commands to prevent make from searching for an implicit rule to build it--otherwise it would apply the same match-anything rule to force' itself and create a dependency loop! # Writing Rules A rule appears in the makefile and says when and how to remake certain files, called the rule's targets (most often only one per rule). It lists the other files that are the dependencies of the target, and commands to use to create or update the target. The order of rules is not significant, except for determining the default goal: the target for make to consider, if you do not otherwise specify one. The default goal is the target of the first rule in the first makefile. If the first rule has multiple targets, only the first target is taken as the default. There are two exceptions: a target starting with a period is not a default unless it contains one or more slashes, /', as well; and, a target that defines a pattern rule has no effect on the default goal. (See section Defining and Redefining Pattern Rules.) Therefore, we usually write the makefile so that the first rule is the one for compiling the entire program or all the programs described by the makefile (often with a target called all'). See section Arguments to Specify the Goals. ## Rule Syntax In general, a rule looks like this: targets : dependencies command ...  or like this: targets : dependencies ; command command ...  The targets are file names, separated by spaces. Wildcard characters may be used (see section Using Wildcard Characters in File Names) and a name of the form a(m)' represents member m in archive file a (see section Archive Members as Targets). Usually there is only one target per rule, but occasionally there is a reason to have more (see section Multiple Targets in a Rule). The command lines start with a tab character. The first command may appear on the line after the dependencies, with a tab character, or may appear on the same line, with a semicolon. Either way, the effect is the same. See section Writing the Commands in Rules. Because dollar signs are used to start variable references, if you really want a dollar sign in a rule you must write two of them, $$' (see section How to Use Variables). You may split a long line by inserting a backslash followed by a newline, but this is not required, as make places no limit on the length of a line in a makefile. A rule tells make two things: when the targets are out of date, and how to update them when necessary. The criterion for being out of date is specified in terms of the dependencies, which consist of file names separated by spaces. (Wildcards and archive members (see section Using make to Update Archive Files) are allowed here too.) A target is out of date if it does not exist or if it is older than any of the dependencies (by comparison of last-modification times). The idea is that the contents of the target file are computed based on information in the dependencies, so if any of the dependencies changes, the contents of the existing target file are no longer necessarily valid. How to update is specified by commands. These are lines to be executed by the shell (normally sh'), but with some extra features (see section Writing the Commands in Rules). ## Using Wildcard Characters in File Names A single file name can specify many files using wildcard characters. The wildcard characters in make are *', ?' and [...]', the same as in the Bourne shell. For example, *.c' specifies a list of all the files (in the working directory) whose names end in .c'. The character ~' at the beginning of a file name also has special significance. If alone, or followed by a slash, it represents your home directory. For example ~/bin' expands to /home/you/bin'. If the ~' is followed by a word, the string represents the home directory of the user named by that word. For example ~john/bin' expands to /home/john/bin'. On systems which don't have a home directory for each user (such as MS-DOS or MS-Windows), this functionality can be simulated by setting the environment variable HOME. Wildcard expansion happens automatically in targets, in dependencies, and in commands (where the shell does the expansion). In other contexts, wildcard expansion happens only if you request it explicitly with the wildcard function. The special significance of a wildcard character can be turned off by preceding it with a backslash. Thus, foo\*bar' would refer to a specific file whose name consists of foo', an asterisk, and bar'. ### Wildcard Examples Wildcards can be used in the commands of a rule, where they are expanded by the shell. For example, here is a rule to delete all the object files: clean: rm -f *.o  Wildcards are also useful in the dependencies of a rule. With the following rule in the makefile, make print' will print all the .c' files that have changed since the last time you printed them: print: *.c lpr -p ? touch print  This rule uses print' as an empty target file; see section Empty Target Files to Record Events. (The automatic variable ?' is used to print only those files that have changed; see section Automatic Variables.) Wildcard expansion does not happen when you define a variable. Thus, if you write this: objects = *.o  then the value of the variable objects is the actual string *.o'. However, if you use the value of objects in a target, dependency or command, wildcard expansion will take place at that time. To set objects to the expansion, instead use: objects := (wildcard *.o)  See section The Function wildcard. ### Pitfalls of Using Wildcards Now here is an example of a naive way of using wildcard expansion, that does not do what you would intend. Suppose you would like to say that the executable file foo' is made from all the object files in the directory, and you write this: objects = *.o foo : (objects) cc -o foo (CFLAGS) (objects)  The value of objects is the actual string *.o'. Wildcard expansion happens in the rule for foo', so that each existing .o' file becomes a dependency of foo' and will be recompiled if necessary. But what if you delete all the .o' files? When a wildcard matches no files, it is left as it is, so then foo' will depend on the oddly-named file *.o'. Since no such file is likely to exist, make will give you an error saying it cannot figure out how to make *.o'. This is not what you want! Actually it is possible to obtain the desired result with wildcard expansion, but you need more sophisticated techniques, including the wildcard function and string substitution. These are described in the following section. Microsoft operating systems (MS-DOS and MS-Windows) use backslashes to separate directories in pathnames, like so:  c:\foo\bar\baz.c  This is equivalent to the Unix-style c:/foo/bar/baz.c' (the c:' part is the so-called drive letter). When make runs on these systems, it supports backslashes as well as the Unix-style forward slashes in pathnames. However, this support does not include the wildcard expansion, where backslash is a quote character. Therefore, you must use Unix-style slashes in these cases. ### The Function wildcard Wildcard expansion happens automatically in rules. But wildcard expansion does not normally take place when a variable is set, or inside the arguments of a function. If you want to do wildcard expansion in such places, you need to use the wildcard function, like this: (wildcard pattern...)  This string, used anywhere in a makefile, is replaced by a space-separated list of names of existing files that match one of the given file name patterns. If no existing file name matches a pattern, then that pattern is omitted from the output of the wildcard function. Note that this is different from how unmatched wildcards behave in rules, where they are used verbatim rather than ignored (see section Pitfalls of Using Wildcards). One use of the wildcard function is to get a list of all the C source files in a directory, like this: (wildcard *.c)  We can change the list of C source files into a list of object files by replacing the .c' suffix with .o' in the result, like this: (patsubst %.c,%.o,(wildcard *.c))  (Here we have used another function, patsubst. See section Functions for String Substitution and Analysis.) Thus, a makefile to compile all C source files in the directory and then link them together could be written as follows: objects := (patsubst %.c,%.o,(wildcard *.c)) foo : (objects) cc -o foo (objects)  (This takes advantage of the implicit rule for compiling C programs, so there is no need to write explicit rules for compiling the files. See section The Two Flavors of Variables, for an explanation of :=', which is a variant of ='.) ## Searching Directories for Dependencies For large systems, it is often desirable to put sources in a separate directory from the binaries. The directory search features of make facilitate this by searching several directories automatically to find a dependency. When you redistribute the files among directories, you do not need to change the individual rules, just the search paths. ### VPATH: Search Path for All Dependencies The value of the make variable VPATH specifies a list of directories that make should search. Most often, the directories are expected to contain dependency files that are not in the current directory; however, VPATH specifies a search list that make applies for all files, including files which are targets of rules. Thus, if a file that is listed as a target or dependency does not exist in the current directory, make searches the directories listed in VPATH for a file with that name. If a file is found in one of them, that file may become the dependency (see below). Rules may then specify the names of files in the dependency list as if they all existed in the current directory. See section Writing Shell Commands with Directory Search. In the VPATH variable, directory names are separated by colons or blanks. The order in which directories are listed is the order followed by make in its search. (On MS-DOS and MS-Windows, semi-colons are used as separators of directory names in VPATH, since the colon can be used in the pathname itself, after the drive letter.) For example, VPATH = src:../headers  specifies a path containing two directories, src' and ../headers', which make searches in that order. With this value of VPATH, the following rule, foo.o : foo.c  is interpreted as if it were written like this: foo.o : src/foo.c  assuming the file foo.c' does not exist in the current directory but is found in the directory src'. ### The vpath Directive Similar to the VPATH variable, but more selective, is the vpath directive (note lower case), which allows you to specify a search path for a particular class of file names: those that match a particular pattern. Thus you can supply certain search directories for one class of file names and other directories (or none) for other file names. There are three forms of the vpath directive: vpath pattern directories Specify the search path directories for file names that match pattern. The search path, directories, is a list of directories to be searched, separated by colons (semi-colons on MS-DOS and MS-Windows) or blanks, just like the search path used in the VPATH variable. vpath pattern Clear out the search path associated with pattern. vpath Clear all search paths previously specified with vpath directives. A vpath pattern is a string containing a %' character. The string must match the file name of a dependency that is being searched for, the %' character matching any sequence of zero or more characters (as in pattern rules; see section Defining and Redefining Pattern Rules). For example, %.h matches files that end in .h. (If there is no %', the pattern must match the dependency exactly, which is not useful very often.) %' characters in a vpath directive's pattern can be quoted with preceding backslashes (\'). Backslashes that would otherwise quote %' characters can be quoted with more backslashes. Backslashes that quote %' characters or other backslashes are removed from the pattern before it is compared to file names. Backslashes that are not in danger of quoting %' characters go unmolested. When a dependency fails to exist in the current directory, if the pattern in a vpath directive matches the name of the dependency file, then the directories in that directive are searched just like (and before) the directories in the VPATH variable. For example, vpath %.h ../headers  tells make to look for any dependency whose name ends in .h' in the directory ../headers' if the file is not found in the current directory. If several vpath patterns match the dependency file's name, then make processes each matching vpath directive one by one, searching all the directories mentioned in each directive. make handles multiple vpath directives in the order in which they appear in the makefile; multiple directives with the same pattern are independent of each other. Thus, vpath %.c foo vpath % blish vpath %.c bar  will look for a file ending in .c' in foo', then blish', then bar', while vpath %.c foo:bar vpath % blish  will look for a file ending in .c' in foo', then bar', then blish'. ### How Directory Searches are Performed When a dependency is found through directory search, regardless of type (general or selective), the pathname located may not be the one that make actually provides you in the dependency list. Sometimes the path discovered through directory search is thrown away. The algorithm make uses to decide whether to keep or abandon a path found via directory search is as follows: 1. If a target file does not exist at the path specified in the makefile, directory search is performed. 2. If the directory search is successful, that path is kept and this file is tentatively stored as the target. 3. All dependencies of this target are examined using this same method. 4. After processing the dependencies, the target may or may not need to be rebuilt: 1. If the target does not need to be rebuilt, the path to the file found during directory search is used for any dependency lists which contain this target. In short, if make doesn't need to rebuild the target then you use the path found via directory search. 2. If the target does need to be rebuilt (is out-of-date), the pathname found during directory search is thrown away, and the target is rebuilt using the file name specified in the makefile. In short, if make must rebuild, then the target is rebuilt locally, not in the directory found via directory search. This algorithm may seem complex, but in practice it is quite often exactly what you want. Other versions of make use a simpler algorithm: if the file does not exist, and it is found via directory search, then that pathname is always used whether or not the target needs to be built. Thus, if the target is rebuilt it is created at the pathname discovered during directory search. If, in fact, this is the behavior you want for some or all of your directories, you can use the GPATH variable to indicate this to make. GPATH has the same syntax and format as VPATH (that is, a space- or colon-delimited list of pathnames). If an out-of-date target is found by directory search in a directory that also appears in GPATH, then that pathname is not thrown away. The target is rebuilt using the expanded path. ### Writing Shell Commands with Directory Search When a dependency is found in another directory through directory search, this cannot change the commands of the rule; they will execute as written. Therefore, you must write the commands with care so that they will look for the dependency in the directory where make finds it. This is done with the automatic variables such as ^' (see section Automatic Variables). For instance, the value of ^' is a list of all the dependencies of the rule, including the names of the directories in which they were found, and the value of @' is the target. Thus: foo.o : foo.c cc -c (CFLAGS) ^ -o @  (The variable CFLAGS exists so you can specify flags for C compilation by implicit rules; we use it here for consistency so it will affect all C compilations uniformly; see section Variables Used by Implicit Rules.) Often the dependencies include header files as well, which you do not want to mention in the commands. The automatic variable <' is just the first dependency: VPATH = src:../headers foo.o : foo.c defs.h hack.h cc -c (CFLAGS) < -o @  ### Directory Search and Implicit Rules The search through the directories specified in VPATH or with vpath also happens during consideration of implicit rules (see section Using Implicit Rules). For example, when a file foo.o' has no explicit rule, make considers implicit rules, such as the built-in rule to compile foo.c' if that file exists. If such a file is lacking in the current directory, the appropriate directories are searched for it. If foo.c' exists (or is mentioned in the makefile) in any of the directories, the implicit rule for C compilation is applied. The commands of implicit rules normally use automatic variables as a matter of necessity; consequently they will use the file names found by directory search with no extra effort. ### Directory Search for Link Libraries Directory search applies in a special way to libraries used with the linker. This special feature comes into play when you write a dependency whose name is of the form -lname'. (You can tell something strange is going on here because the dependency is normally the name of a file, and the file name of the library looks like libname.a', not like -lname'.) When a dependency's name has the form -lname', make handles it specially by searching for the file libname.a' in the current directory, in directories specified by matching vpath search paths and the VPATH search path, and then in the directories /lib', /usr/lib', and prefix/lib' (normally /usr/local/lib', but MS-DOS/MS-Windows versions of make behave as if prefix is defined to be the root of the DJGPP installation tree). For example, foo : foo.c -lcurses cc ^ -o @  would cause the command cc foo.c /usr/lib/libcurses.a -o foo' to be executed when foo' is older than foo.c' or than /usr/lib/libcurses.a'. ## Phony Targets A phony target is one that is not really the name of a file. It is just a name for some commands to be executed when you make an explicit request. There are two reasons to use a phony target: to avoid a conflict with a file of the same name, and to improve performance. If you write a rule whose commands will not create the target file, the commands will be executed every time the target comes up for remaking. Here is an example: clean: rm *.o temp  Because the rm command does not create a file named clean', probably no such file will ever exist. Therefore, the rm command will be executed every time you say make clean'. The phony target will cease to work if anything ever does create a file named clean' in this directory. Since it has no dependencies, the file clean' would inevitably be considered up to date, and its commands would not be executed. To avoid this problem, you can explicitly declare the target to be phony, using the special target .PHONY (see section Special Built-in Target Names) as follows: .PHONY : clean  Once this is done, make clean' will run the commands regardless of whether there is a file named clean'. Since it knows that phony targets do not name actual files that could be remade from other files, make skips the implicit rule search for phony targets (see section Using Implicit Rules). This is why declaring a target phony is good for performance, even if you are not worried about the actual file existing. Thus, you first write the line that states that clean is a phony target, then you write the rule, like this: .PHONY: clean clean: rm *.o temp  A phony target should not be a dependency of a real target file; if it is, its commands are run every time make goes to update that file. As long as a phony target is never a dependency of a real target, the phony target commands will be executed only when the phony target is a specified goal (see section Arguments to Specify the Goals). Phony targets can have dependencies. When one directory contains multiple programs, it is most convenient to describe all of the programs in one makefile ./Makefile'. Since the target remade by default will be the first one in the makefile, it is common to make this a phony target named all' and give it, as dependencies, all the individual programs. For example: all : prog1 prog2 prog3 .PHONY : all prog1 : prog1.o utils.o cc -o prog1 prog1.o utils.o prog2 : prog2.o cc -o prog2 prog2.o prog3 : prog3.o sort.o utils.o cc -o prog3 prog3.o sort.o utils.o  Now you can say just make' to remake all three programs, or specify as arguments the ones to remake (as in make prog1 prog3'). When one phony target is a dependency of another, it serves as a subroutine of the other. For example, here make cleanall' will delete the object files, the difference files, and the file program': .PHONY: cleanall cleanobj cleandiff cleanall : cleanobj cleandiff rm program cleanobj : rm *.o cleandiff : rm *.diff  ## Rules without Commands or Dependencies If a rule has no dependencies or commands, and the target of the rule is a nonexistent file, then make imagines this target to have been updated whenever its rule is run. This implies that all targets depending on this one will always have their commands run. An example will illustrate this: clean: FORCE rm (objects) FORCE:  Here the target FORCE' satisfies the special conditions, so the target clean' that depends on it is forced to run its commands. There is nothing special about the name FORCE', but that is one name commonly used this way. As you can see, using FORCE' this way has the same results as using .PHONY: clean'. Using .PHONY' is more explicit and more efficient. However, other versions of make do not support .PHONY'; thus FORCE' appears in many makefiles. See section Phony Targets. ## Empty Target Files to Record Events The empty target is a variant of the phony target; it is used to hold commands for an action that you request explicitly from time to time. Unlike a phony target, this target file can really exist; but the file's contents do not matter, and usually are empty. The purpose of the empty target file is to record, with its last-modification time, when the rule's commands were last executed. It does so because one of the commands is a touch command to update the target file. The empty target file must have some dependencies. When you ask to remake the empty target, the commands are executed if any dependency is more recent than the target; in other words, if a dependency has changed since the last time you remade the target. Here is an example: print: foo.c bar.c lpr -p ? touch print  With this rule, make print' will execute the lpr command if either source file has changed since the last make print'. The automatic variable ?' is used to print only those files that have changed (see section Automatic Variables). ## Special Built-in Target Names Certain names have special meanings if they appear as targets. .PHONY The dependencies of the special target .PHONY are considered to be phony targets. When it is time to consider such a target, make will run its commands unconditionally, regardless of whether a file with that name exists or what its last-modification time is. See section Phony Targets. .SUFFIXES The dependencies of the special target .SUFFIXES are the list of suffixes to be used in checking for suffix rules. See section Old-Fashioned Suffix Rules. .DEFAULT The commands specified for .DEFAULT are used for any target for which no rules are found (either explicit rules or implicit rules). See section Defining Last-Resort Default Rules. If .DEFAULT commands are specified, every file mentioned as a dependency, but not as a target in a rule, will have these commands executed on its behalf. See section Implicit Rule Search Algorithm. .PRECIOUS The targets which .PRECIOUS depends on are given the following special treatment: if make is killed or interrupted during the execution of their commands, the target is not deleted. See section Interrupting or Killing make. Also, if the target is an intermediate file, it will not be deleted after it is no longer needed, as is normally done. See section Chains of Implicit Rules. You can also list the target pattern of an implicit rule (such as %.o') as a dependency file of the special target .PRECIOUS to preserve intermediate files created by rules whose target patterns match that file's name. .INTERMEDIATE The targets which .INTERMEDIATE depends on are treated as intermediate files. See section Chains of Implicit Rules. .INTERMEDIATE with no dependencies marks all file targets mentioned in the makefile as intermediate. .SECONDARY The targets which .SECONDARY depends on are treated as intermediate files, except that they are never automatically deleted. See section Chains of Implicit Rules. .SECONDARY with no dependencies marks all file targets mentioned in the makefile as secondary. .IGNORE If you specify dependencies for .IGNORE, then make will ignore errors in execution of the commands run for those particular files. The commands for .IGNORE are not meaningful. If mentioned as a target with no dependencies, .IGNORE says to ignore errors in execution of commands for all files. This usage of .IGNORE' is supported only for historical compatibility. Since this affects every command in the makefile, it is not very useful; we recommend you use the more selective ways to ignore errors in specific commands. See section Errors in Commands. .SILENT If you specify dependencies for .SILENT, then make will not the print commands to remake those particular files before executing them. The commands for .SILENT are not meaningful. If mentioned as a target with no dependencies, .SILENT says not to print any commands before executing them. This usage of .SILENT' is supported only for historical compatibility. We recommend you use the more selective ways to silence specific commands. See section Command Echoing. If you want to silence all commands for a particular run of make, use the -s' or --silent' option (see section Summary of Options). .EXPORT_ALL_VARIABLES Simply by being mentioned as a target, this tells make to export all variables to child processes by default. See section Communicating Variables to a Sub-make. Any defined implicit rule suffix also counts as a special target if it appears as a target, and so does the concatenation of two suffixes, such as .c.o'. These targets are suffix rules, an obsolete way of defining implicit rules (but a way still widely used). In principle, any target name could be special in this way if you break it in two and add both pieces to the suffix list. In practice, suffixes normally begin with .', so these special target names also begin with .'. See section Old-Fashioned Suffix Rules. ## Multiple Targets in a Rule A rule with multiple targets is equivalent to writing many rules, each with one target, and all identical aside from that. The same commands apply to all the targets, but their effects may vary because you can substitute the actual target name into the command using @'. The rule contributes the same dependencies to all the targets also. This is useful in two cases. • You want just dependencies, no commands. For example: kbd.o command.o files.o: command.h  gives an additional dependency to each of the three object files mentioned. • Similar commands work for all the targets. The commands do not need to be absolutely identical, since the automatic variable @' can be used to substitute the particular target to be remade into the commands (see section Automatic Variables). For example: bigoutput littleoutput : text.g generate text.g -(subst output,,@) > @  is equivalent to bigoutput : text.g generate text.g -big > bigoutput littleoutput : text.g generate text.g -little > littleoutput  Here we assume the hypothetical program generate makes two types of output, one if given -big' and one if given -little'. See section Functions for String Substitution and Analysis, for an explanation of the subst function. Suppose you would like to vary the dependencies according to the target, much as the variable @' allows you to vary the commands. You cannot do this with multiple targets in an ordinary rule, but you can do it with a static pattern rule. See section Static Pattern Rules. ## Multiple Rules for One Target One file can be the target of several rules. All the dependencies mentioned in all the rules are merged into one list of dependencies for the target. If the target is older than any dependency from any rule, the commands are executed. There can only be one set of commands to be executed for a file. If more than one rule gives commands for the same file, make uses the last set given and prints an error message. (As a special case, if the file's name begins with a dot, no error message is printed. This odd behavior is only for compatibility with other implementations of make.) There is no reason to write your makefiles this way; that is why make gives you an error message. An extra rule with just dependencies can be used to give a few extra dependencies to many files at once. For example, one usually has a variable named objects containing a list of all the compiler output files in the system being made. An easy way to say that all of them must be recompiled if config.h' changes is to write the following: objects = foo.o bar.o foo.o : defs.h bar.o : defs.h test.h (objects) : config.h  This could be inserted or taken out without changing the rules that really specify how to make the object files, making it a convenient form to use if you wish to add the additional dependency intermittently. Another wrinkle is that the additional dependencies could be specified with a variable that you set with a command argument to make (see section Overriding Variables). For example, extradeps= (objects) : (extradeps)  means that the command make extradeps=foo.h' will consider foo.h' as a dependency of each object file, but plain make' will not. If none of the explicit rules for a target has commands, then make searches for an applicable implicit rule to find some commands see section Using Implicit Rules). ## Static Pattern Rules Static pattern rules are rules which specify multiple targets and construct the dependency names for each target based on the target name. They are more general than ordinary rules with multiple targets because the targets do not have to have identical dependencies. Their dependencies must be analogous, but not necessarily identical. ### Syntax of Static Pattern Rules Here is the syntax of a static pattern rule: targets ...: target-pattern: dep-patterns ... commands ...  The targets list specifies the targets that the rule applies to. The targets can contain wildcard characters, just like the targets of ordinary rules (see section Using Wildcard Characters in File Names). The target-pattern and dep-patterns say how to compute the dependencies of each target. Each target is matched against the target-pattern to extract a part of the target name, called the stem. This stem is substituted into each of the dep-patterns to make the dependency names (one from each dep-pattern). Each pattern normally contains the character %' just once. When the target-pattern matches a target, the %' can match any part of the target name; this part is called the stem. The rest of the pattern must match exactly. For example, the target foo.o' matches the pattern %.o', with foo' as the stem. The targets foo.c' and foo.out' do not match that pattern. The dependency names for each target are made by substituting the stem for the %' in each dependency pattern. For example, if one dependency pattern is %.c', then substitution of the stem foo' gives the dependency name foo.c'. It is legitimate to write a dependency pattern that does not contain %'; then this dependency is the same for all targets. %' characters in pattern rules can be quoted with preceding backslashes (\'). Backslashes that would otherwise quote %' characters can be quoted with more backslashes. Backslashes that quote %' characters or other backslashes are removed from the pattern before it is compared to file names or has a stem substituted into it. Backslashes that are not in danger of quoting %' characters go unmolested. For example, the pattern the\%weird\\%pattern\\' has the%weird\' preceding the operative %' character, and pattern\\' following it. The final two backslashes are left alone because they cannot affect any %' character. Here is an example, which compiles each of foo.o' and bar.o' from the corresponding .c' file: objects = foo.o bar.o all: (objects) (objects): %.o: %.c (CC) -c (CFLAGS) < -o @  Here <' is the automatic variable that holds the name of the dependency and @' is the automatic variable that holds the name of the target; see section Automatic Variables. Each target specified must match the target pattern; a warning is issued for each target that does not. If you have a list of files, only some of which will match the pattern, you can use the filter function to remove nonmatching file names (see section Functions for String Substitution and Analysis): files = foo.elc bar.o lose.o (filter %.o,(files)): %.o: %.c (CC) -c (CFLAGS) < -o @ (filter %.elc,(files)): %.elc: %.el emacs -f batch-byte-compile <  In this example the result of (filter %.o,(files))' is bar.o lose.o', and the first static pattern rule causes each of these object files to be updated by compiling the corresponding C source file. The result of (filter %.elc,(files))' is foo.elc', so that file is made from foo.el'. Another example shows how to use * in static pattern rules: bigoutput littleoutput : %output : text.g generate text.g -* > @  When the generate command is run, * will expand to the stem, either big' or little'. ### Static Pattern Rules versus Implicit Rules A static pattern rule has much in common with an implicit rule defined as a pattern rule (see section Defining and Redefining Pattern Rules). Both have a pattern for the target and patterns for constructing the names of dependencies. The difference is in how make decides when the rule applies. An implicit rule can apply to any target that matches its pattern, but it does apply only when the target has no commands otherwise specified, and only when the dependencies can be found. If more than one implicit rule appears applicable, only one applies; the choice depends on the order of rules. By contrast, a static pattern rule applies to the precise list of targets that you specify in the rule. It cannot apply to any other target and it invariably does apply to each of the targets specified. If two conflicting rules apply, and both have commands, that's an error. The static pattern rule can be better than an implicit rule for these reasons: • You may wish to override the usual implicit rule for a few files whose names cannot be categorized syntactically but can be given in an explicit list. • If you cannot be sure of the precise contents of the directories you are using, you may not be sure which other irrelevant files might lead make to use the wrong implicit rule. The choice might depend on the order in which the implicit rule search is done. With static pattern rules, there is no uncertainty: each rule applies to precisely the targets specified. ## Double-Colon Rules Double-colon rules are rules written with ::' instead of :' after the target names. They are handled differently from ordinary rules when the same target appears in more than one rule. When a target appears in multiple rules, all the rules must be the same type: all ordinary, or all double-colon. If they are double-colon, each of them is independent of the others. Each double-colon rule's commands are executed if the target is older than any dependencies of that rule. This can result in executing none, any, or all of the double-colon rules. Double-colon rules with the same target are in fact completely separate from one another. Each double-colon rule is processed individually, just as rules with different targets are processed. The double-colon rules for a target are executed in the order they appear in the makefile. However, the cases where double-colon rules really make sense are those where the order of executing the commands would not matter. Double-colon rules are somewhat obscure and not often very useful; they provide a mechanism for cases in which the method used to update a target differs depending on which dependency files caused the update, and such cases are rare. Each double-colon rule should specify commands; if it does not, an implicit rule will be used if one applies. See section Using Implicit Rules. ## Generating Dependencies Automatically In the makefile for a program, many of the rules you need to write often say only that some object file depends on some header file. For example, if main.c' uses defs.h' via an #include, you would write: main.o: defs.h  You need this rule so that make knows that it must remake main.o' whenever defs.h' changes. You can see that for a large program you would have to write dozens of such rules in your makefile. And, you must always be very careful to update the makefile every time you add or remove an #include. To avoid this hassle, most modern C compilers can write these rules for you, by looking at the #include lines in the source files. Usually this is done with the -M' option to the compiler. For example, the command: cc -M main.c  generates the output: main.o : main.c defs.h  Thus you no longer have to write all those rules yourself. The compiler will do it for you. Note that such a dependency constitutes mentioning main.o' in a makefile, so it can never be considered an intermediate file by implicit rule search. This means that make won't ever remove the file after using it; see section Chains of Implicit Rules. With old make programs, it was traditional practice to use this compiler feature to generate dependencies on demand with a command like make depend'. That command would create a file depend' containing all the automatically-generated dependencies; then the makefile could use include to read them in (see section Including Other Makefiles). In GNU make, the feature of remaking makefiles makes this practice obsolete--you need never tell make explicitly to regenerate the dependencies, because it always regenerates any makefile that is out of date. See section How Makefiles Are Remade. The practice we recommend for automatic dependency generation is to have one makefile corresponding to each source file. For each source file name.c' there is a makefile name.d' which lists what files the object file name.o' depends on. That way only the source files that have changed need to be rescanned to produce the new dependencies. Here is the pattern rule to generate a file of dependencies (i.e., a makefile) called name.d' from a C source file called name.c': %.d: %.c (SHELL) -ec '(CC) -M (CPPFLAGS) < \ | sed '\''s/$$*$$\.o[ :]*/\1.o @ : /g'\'' > @; \ [ -s @ ] || rm -f @'  See section Defining and Redefining Pattern Rules, for information on defining pattern rules. The -e' flag to the shell makes it exit immediately if the (CC) command fails (exits with a nonzero status). Normally the shell exits with the status of the last command in the pipeline (sed in this case), so make would not notice a nonzero status from the compiler. With the GNU C compiler, you may wish to use the -MM' flag instead of -M'. This omits dependencies on system header files. See section Options Controlling the Preprocessor' in Using GNU CC, for details. The purpose of the sed command is to translate (for example): main.o : main.c defs.h  into: main.o main.d : main.c defs.h  This makes each .d' file depend on all the source and header files that the corresponding .o' file depends on. make then knows it must regenerate the dependencies whenever any of the source or header files changes. Once you've defined the rule to remake the .d' files, you then use the include directive to read them all in. See section Including Other Makefiles. For example: sources = foo.c bar.c include (sources:.c=.d)  (This example uses a substitution variable reference to translate the list of source files foo.c bar.c' into a list of dependency makefiles, foo.d bar.d'. See section Substitution References, for full information on substitution references.) Since the .d' files are makefiles like any others, make will remake them as necessary with no further work from you. See section How Makefiles Are Remade. # Writing the Commands in Rules The commands of a rule consist of shell command lines to be executed one by one. Each command line must start with a tab, except that the first command line may be attached to the target-and-dependencies line with a semicolon in between. Blank lines and lines of just comments may appear among the command lines; they are ignored. (But beware, an apparently "blank" line that begins with a tab is not blank! It is an empty command; see section Using Empty Commands.) Users use many different shell programs, but commands in makefiles are always interpreted by /bin/sh' unless the makefile specifies otherwise. See section Command Execution. The shell that is in use determines whether comments can be written on command lines, and what syntax they use. When the shell is /bin/sh', a #' starts a comment that extends to the end of the line. The #' does not have to be at the beginning of a line. Text on a line before a #' is not part of the comment. ## Command Echoing Normally make prints each command line before it is executed. We call this echoing because it gives the appearance that you are typing the commands yourself. When a line starts with @', the echoing of that line is suppressed. The @' is discarded before the command is passed to the shell. Typically you would use this for a command whose only effect is to print something, such as an echo command to indicate progress through the makefile: @echo About to make distribution files  When make is given the flag -n' or --just-print', echoing is all that happens, no execution. See section Summary of Options. In this case and only this case, even the commands starting with @' are printed. This flag is useful for finding out which commands make thinks are necessary without actually doing them. The -s' or --silent' flag to make prevents all echoing, as if all commands started with @'. A rule in the makefile for the special target .SILENT without dependencies has the same effect (see section Special Built-in Target Names). .SILENT is essentially obsolete since @' is more flexible. ## Command Execution When it is time to execute commands to update a target, they are executed by making a new subshell for each line. (In practice, make may take shortcuts that do not affect the results.) Please note: this implies that shell commands such as cd that set variables local to each process will not affect the following command lines. (2) If you want to use cd to affect the next command, put the two on a single line with a semicolon between them. Then make will consider them a single command and pass them, together, to a shell which will execute them in sequence. For example: foo : bar/lose cd bar; gobble lose > ../foo  If you would like to split a single shell command into multiple lines of text, you must use a backslash at the end of all but the last subline. Such a sequence of lines is combined into a single line, by deleting the backslash-newline sequences, before passing it to the shell. Thus, the following is equivalent to the preceding example: foo : bar/lose cd bar; \ gobble lose > ../foo  The program used as the shell is taken from the variable SHELL. By default, the program /bin/sh' is used. On MS-DOS, if SHELL is not set, the value of the variable COMSPEC (which is always set) is used instead. The processing of lines that set the variable SHELL in Makefiles is different on MS-DOS. The stock shell, command.com', is ridiculously limited in its functionality and many users of make tend to install a replacement shell. Therefore, on MS-DOS, make examines the value of SHELL, and changes its behavior based on whether it points to a Unix-style or DOS-style shell. This allows reasonable functionality even if SHELL points to command.com'. If SHELL points to a Unix-style shell, make on MS-DOS additionally checks whether that shell can indeed be found; if not, it ignores the line that sets SHELL. In MS-DOS, GNU make searches for the shell in the following places: 1. In the precise place pointed to by the value of SHELL. For example, if the makefile specifies SHELL = /bin/sh', make will look in the directory /bin' on the current drive. 2. In the current directory. 3. In each of the directories in the PATH variable, in order. In every directory it examines, make will first look for the specific file (sh' in the example above). If this is not found, it will also look in that directory for that file with one of the known extensions which identify executable files. For example .exe', .com', .bat', .btm', .sh', and some others. If any of these attempts is successful, the value of SHELL will be set to the full pathname of the shell as found. However, if none of these is found, the value of SHELL will not be changed, and thus the line that sets it will be effectively ignored. This is so make will only support features specific to a Unix-style shell if such a shell is actually installed on the system where make runs. Note that this extended search for the shell is limited to the cases where SHELL is set from the Makefile; if it is set in the environment or command line, you are expected to set it to the full pathname of the shell, exactly as things are on Unix. The effect of the above DOS-specific processing is that a Makefile that says SHELL = /bin/sh' (as many Unix makefiles do), will work on MS-DOS unaltered if you have e.g. sh.exe' installed in some directory along your PATH. Unlike most variables, the variable SHELL is never set from the environment. This is because the SHELL environment variable is used to specify your personal choice of shell program for interactive use. It would be very bad for personal choices like this to affect the functioning of makefiles. See section Variables from the Environment. However, on MS-DOS and MS-Windows the value of SHELL in the environment is used, since on those systems most users do not set this variable, and therefore it is most likely set specifically to be used by make. On MS-DOS, if the setting of SHELL is not suitable for make, you can set the variable MAKESHELL to the shell that make should use; this will override the value of SHELL. ## Parallel Execution GNU make knows how to execute several commands at once. Normally, make will execute only one command at a time, waiting for it to finish before executing the next. However, the -j' or --jobs' option tells make to execute many commands simultaneously. On MS-DOS, the -j' option has no effect, since that system doesn't support multi-processing. If the -j' option is followed by an integer, this is the number of commands to execute at once; this is called the number of job slots. If there is nothing looking like an integer after the -j' option, there is no limit on the number of job slots. The default number of job slots is one, which means serial execution (one thing at a time). One unpleasant consequence of running several commands simultaneously is that output from all of the commands comes when the commands send it, so messages from different commands may be interspersed. Another problem is that two processes cannot both take input from the same device; so to make sure that only one command tries to take input from the terminal at once, make will invalidate the standard input streams of all but one running command. This means that attempting to read from standard input will usually be a fatal error (a Broken pipe' signal) for most child processes if there are several. It is unpredictable which command will have a valid standard input stream (which will come from the terminal, or wherever you redirect the standard input of make). The first command run will always get it first, and the first command started after that one finishes will get it next, and so on. We will change how this aspect of make works if we find a better alternative. In the mean time, you should not rely on any command using standard input at all if you are using the parallel execution feature; but if you are not using this feature, then standard input works normally in all commands. If a command fails (is killed by a signal or exits with a nonzero status), and errors are not ignored for that command (see section Errors in Commands), the remaining command lines to remake the same target will not be run. If a command fails and the -k' or --keep-going' option was not given (see section Summary of Options), make aborts execution. If make terminates for any reason (including a signal) with child processes running, it waits for them to finish before actually exiting. When the system is heavily loaded, you will probably want to run fewer jobs than when it is lightly loaded. You can use the -l' option to tell make to limit the number of jobs to run at once, based on the load average. The -l' or --max-load' option is followed by a floating-point number. For example, -l 2.5  will not let make start more than one job if the load average is above 2.5. The -l' option with no following number removes the load limit, if one was given with a previous -l' option. More precisely, when make goes to start up a job, and it already has at least one job running, it checks the current load average; if it is not lower than the limit given with -l', make waits until the load average goes below that limit, or until all the other jobs finish. By default, there is no load limit. ## Errors in Commands After each shell command returns, make looks at its exit status. If the command completed successfully, the next command line is executed in a new shell; after the last command line is finished, the rule is finished. If there is an error (the exit status is nonzero), make gives up on the current rule, and perhaps on all rules. Sometimes the failure of a certain command does not indicate a problem. For example, you may use the mkdir command to ensure that a directory exists. If the directory already exists, mkdir will report an error, but you probably want make to continue regardless. To ignore errors in a command line, write a -' at the beginning of the line's text (after the initial tab). The -' is discarded before the command is passed to the shell for execution. For example, clean: -rm -f *.o  This causes rm to continue even if it is unable to remove a file. When you run make with the -i' or --ignore-errors' flag, errors are ignored in all commands of all rules. A rule in the makefile for the special target .IGNORE has the same effect, if there are no dependencies. These ways of ignoring errors are obsolete because -' is more flexible. When errors are to be ignored, because of either a -' or the -i' flag, make treats an error return just like success, except that it prints out a message that tells you the status code the command exited with, and says that the error has been ignored. When an error happens that make has not been told to ignore, it implies that the current target cannot be correctly remade, and neither can any other that depends on it either directly or indirectly. No further commands will be executed for these targets, since their preconditions have not been achieved. Normally make gives up immediately in this circumstance, returning a nonzero status. However, if the -k' or --keep-going' flag is specified, make continues to consider the other dependencies of the pending targets, remaking them if necessary, before it gives up and returns nonzero status. For example, after an error in compiling one object file, make -k' will continue compiling other object files even though it already knows that linking them will be impossible. See section Summary of Options. The usual behavior assumes that your purpose is to get the specified targets up to date; once make learns that this is impossible, it might as well report the failure immediately. The -k' option says that the real purpose is to test as many of the changes made in the program as possible, perhaps to find several independent problems so that you can correct them all before the next attempt to compile. This is why Emacs' compile command passes the -k' flag by default. Usually when a command fails, if it has changed the target file at all, the file is corrupted and cannot be used--or at least it is not completely updated. Yet the file's timestamp says that it is now up to date, so the next time make runs, it will not try to update that file. The situation is just the same as when the command is killed by a signal; see section Interrupting or Killing make. So generally the right thing to do is to delete the target file if the command fails after beginning to change the file. make will do this if .DELETE_ON_ERROR appears as a target. This is almost always what you want make to do, but it is not historical practice; so for compatibility, you must explicitly request it. ## Interrupting or Killing make If make gets a fatal signal while a command is executing, it may delete the target file that the command was supposed to update. This is done if the target file's last-modification time has changed since make first checked it. The purpose of deleting the target is to make sure that it is remade from scratch when make is next run. Why is this? Suppose you type Ctrl-c while a compiler is running, and it has begun to write an object file foo.o'. The Ctrl-c kills the compiler, resulting in an incomplete file whose last-modification time is newer than the source file foo.c'. But make also receives the Ctrl-c signal and deletes this incomplete file. If make did not do this, the next invocation of make would think that foo.o' did not require updating--resulting in a strange error message from the linker when it tries to link an object file half of which is missing. You can prevent the deletion of a target file in this way by making the special target .PRECIOUS depend on it. Before remaking a target, make checks to see whether it appears on the dependencies of .PRECIOUS, and thereby decides whether the target should be deleted if a signal happens. Some reasons why you might do this are that the target is updated in some atomic fashion, or exists only to record a modification-time (its contents do not matter), or must exist at all times to prevent other sorts of trouble. ## Recursive Use of make Recursive use of make means using make as a command in a makefile. This technique is useful when you want separate makefiles for various subsystems that compose a larger system. For example, suppose you have a subdirectory subdir' which has its own makefile, and you would like the containing directory's makefile to run make on the subdirectory. You can do it by writing this: subsystem: cd subdir && (MAKE)  or, equivalently, this (see section Summary of Options): subsystem: (MAKE) -C subdir  You can write recursive make commands just by copying this example, but there are many things to know about how they work and why, and about how the sub-make relates to the top-level make. For your convenience, GNU make sets the variable CURDIR to the pathname of the current working directory for you. If -C is in effect, it will contain the path of the new directory, not the original. The value has the same precedence it would have if it were set in the makefile (by default, an environment variable CURDIR will not override this value). Note that setting this variable has no effect on the operation of make ### How the MAKE Variable Works Recursive make commands should always use the variable MAKE, not the explicit command name make', as shown here: subsystem: cd subdir && (MAKE)  The value of this variable is the file name with which make was invoked. If this file name was /bin/make', then the command executed is cd subdir && /bin/make'. If you use a special version of make to run the top-level makefile, the same special version will be executed for recursive invocations. As a special feature, using the variable MAKE in the commands of a rule alters the effects of the -t' (--touch'), -n' (--just-print'), or -q' (--question') option. Using the MAKE variable has the same effect as using a +' character at the beginning of the command line. See section Instead of Executing the Commands. Consider the command make -t' in the above example. (The -t' option marks targets as up to date without actually running any commands; see section Instead of Executing the Commands.) Following the usual definition of -t', a make -t' command in the example would create a file named subsystem' and do nothing else. What you really want it to do is run cd subdir && make -t'; but that would require executing the command, and -t' says not to execute commands. The special feature makes this do what you want: whenever a command line of a rule contains the variable MAKE, the flags -t', -n' and -q' do not apply to that line. Command lines containing MAKE are executed normally despite the presence of a flag that causes most commands not to be run. The usual MAKEFLAGS mechanism passes the flags to the sub-make (see section Communicating Options to a Sub-make), so your request to touch the files, or print the commands, is propagated to the subsystem. ### Communicating Variables to a Sub-make Variable values of the top-level make can be passed to the sub-make through the environment by explicit request. These variables are defined in the sub-make as defaults, but do not override what is specified in the makefile used by the sub-make makefile unless you use the -e' switch (see section Summary of Options). To pass down, or export, a variable, make adds the variable and its value to the environment for running each command. The sub-make, in turn, uses the environment to initialize its table of variable values. See section Variables from the Environment. Except by explicit request, make exports a variable only if it is either defined in the environment initially or set on the command line, and if its name consists only of letters, numbers, and underscores. Some shells cannot cope with environment variable names consisting of characters other than letters, numbers, and underscores. The special variables SHELL and MAKEFLAGS are always exported (unless you unexport them). MAKEFILES is exported if you set it to anything. make automatically passes down variable values that were defined on the command line, by putting them in the MAKEFLAGS variable. See the next section. Variables are not normally passed down if they were created by default by make (see section Variables Used by Implicit Rules). The sub-make will define these for itself. If you want to export specific variables to a sub-make, use the export directive, like this: export variable ...  If you want to prevent a variable from being exported, use the unexport directive, like this: unexport variable ...  As a convenience, you can define a variable and export it at the same time by doing: export variable = value  has the same result as: variable = value export variable  and export variable := value  has the same result as: variable := value export variable  Likewise, export variable += value  is just like: variable += value export variable  See section Appending More Text to Variables. You may notice that the export and unexport directives work in make in the same way they work in the shell, sh. If you want all variables to be exported by default, you can use export by itself: export  This tells make that variables which are not explicitly mentioned in an export or unexport directive should be exported. Any variable given in an unexport directive will still not be exported. If you use export by itself to export variables by default, variables whose names contain characters other than alphanumerics and underscores will not be exported unless specifically mentioned in an export directive. The behavior elicited by an export directive by itself was the default in older versions of GNU make. If your makefiles depend on this behavior and you want to be compatible with old versions of make, you can write a rule for the special target .EXPORT_ALL_VARIABLES instead of using the export directive. This will be ignored by old makes, while the export directive will cause a syntax error. Likewise, you can use unexport by itself to tell make not to export variables by default. Since this is the default behavior, you would only need to do this if export had been used by itself earlier (in an included makefile, perhaps). You cannot use export and unexport by themselves to have variables exported for some commands and not for others. The last export or unexport directive that appears by itself determines the behavior for the entire run of make. As a special feature, the variable MAKELEVEL is changed when it is passed down from level to level. This variable's value is a string which is the depth of the level as a decimal number. The value is 0' for the top-level make; 1' for a sub-make, 2' for a sub-sub-make, and so on. The incrementation happens when make sets up the environment for a command. The main use of MAKELEVEL is to test it in a conditional directive (see section Conditional Parts of Makefiles); this way you can write a makefile that behaves one way if run recursively and another way if run directly by you. You can use the variable MAKEFILES to cause all sub-make commands to use additional makefiles. The value of MAKEFILES is a whitespace-separated list of file names. This variable, if defined in the outer-level makefile, is passed down through the environment; then it serves as a list of extra makefiles for the sub-make to read before the usual or specified ones. See section The Variable MAKEFILES. ### Communicating Options to a Sub-make Flags such as -s' and -k' are passed automatically to the sub-make through the variable MAKEFLAGS. This variable is set up automatically by make to contain the flag letters that make received. Thus, if you do make -ks' then MAKEFLAGS gets the value ks'. As a consequence, every sub-make gets a value for MAKEFLAGS in its environment. In response, it takes the flags from that value and processes them as if they had been given as arguments. See section Summary of Options. Likewise variables defined on the command line are passed to the sub-make through MAKEFLAGS. Words in the value of MAKEFLAGS that contain =', make treats as variable definitions just as if they appeared on the command line. See section Overriding Variables. The options -C', -f', -o', and -W' are not put into MAKEFLAGS; these options are not passed down. The -j' option is a special case (see section Parallel Execution). If you set it to some numeric value, -j 1' is always put into MAKEFLAGS instead of the value you specified. This is because if the -j' option were passed down to sub-makes, you would get many more jobs running in parallel than you asked for. If you give -j' with no numeric argument, meaning to run as many jobs as possible in parallel, this is passed down, since multiple infinities are no more than one. If you do not want to pass the other flags down, you must change the value of MAKEFLAGS, like this: subsystem: cd subdir && (MAKE) MAKEFLAGS=  The command line variable definitions really appear in the variable MAKEOVERRIDES, and MAKEFLAGS contains a reference to this variable. If you do want to pass flags down normally, but don't want to pass down the command line variable definitions, you can reset MAKEOVERRIDES to empty, like this: MAKEOVERRIDES =  This is not usually useful to do. However, some systems have a small fixed limit on the size of the environment, and putting so much information in into the value of MAKEFLAGS can exceed it. If you see the error message Arg list too long', this may be the problem. (For strict compliance with POSIX.2, changing MAKEOVERRIDES does not affect MAKEFLAGS if the special target .POSIX' appears in the makefile. You probably do not care about this.) A similar variable MFLAGS exists also, for historical compatibility. It has the same value as MAKEFLAGS except that it does not contain the command line variable definitions, and it always begins with a hyphen unless it is empty (MAKEFLAGS begins with a hyphen only when it begins with an option that has no single-letter version, such as --warn-undefined-variables'). MFLAGS was traditionally used explicitly in the recursive make command, like this: subsystem: cd subdir && (MAKE) (MFLAGS)  but now MAKEFLAGS makes this usage redundant. If you want your makefiles to be compatible with old make programs, use this technique; it will work fine with more modern make versions too. The MAKEFLAGS variable can also be useful if you want to have certain options, such as -k' (see section Summary of Options), set each time you run make. You simply put a value for MAKEFLAGS in your environment. You can also set MAKEFLAGS in a makefile, to specify additional flags that should also be in effect for that makefile. (Note that you cannot use MFLAGS this way. That variable is set only for compatibility; make does not interpret a value you set for it in any way.) When make interprets the value of MAKEFLAGS (either from the environment or from a makefile), it first prepends a hyphen if the value does not already begin with one. Then it chops the value into words separated by blanks, and parses these words as if they were options given on the command line (except that -C', -f', -h', -o', -W', and their long-named versions are ignored; and there is no error for an invalid option). If you do put MAKEFLAGS in your environment, you should be sure not to include any options that will drastically affect the actions of make and undermine the purpose of makefiles and of make itself. For instance, the -t', -n', and -q' options, if put in one of these variables, could have disastrous consequences and would certainly have at least surprising and probably annoying effects. ### The --print-directory' Option If you use several levels of recursive make invocations, the -w' or --print-directory' option can make the output a lot easier to understand by showing each directory as make starts processing it and as make finishes processing it. For example, if make -w' is run in the directory /u/gnu/make', make will print a line of the form: make: Entering directory /u/gnu/make'.  before doing anything else, and a line of the form: make: Leaving directory /u/gnu/make'.  when processing is completed. Normally, you do not need to specify this option because make' does it for you: -w' is turned on automatically when you use the -C' option, and in sub-makes. make will not automatically turn on -w' if you also use -s', which says to be silent, or if you use --no-print-directory' to explicitly disable it. ## Defining Canned Command Sequences When the same sequence of commands is useful in making various targets, you can define it as a canned sequence with the define directive, and refer to the canned sequence from the rules for those targets. The canned sequence is actually a variable, so the name must not conflict with other variable names. Here is an example of defining a canned sequence of commands: define run-yacc yacc (firstword ^) mv y.tab.c @ endef  Here run-yacc is the name of the variable being defined; endef marks the end of the definition; the lines in between are the commands. The define directive does not expand variable references and function calls in the canned sequence; the ' characters, parentheses, variable names, and so on, all become part of the value of the variable you are defining. See section Defining Variables Verbatim, for a complete explanation of define. The first command in this example runs Yacc on the first dependency of whichever rule uses the canned sequence. The output file from Yacc is always named y.tab.c'. The second command moves the output to the rule's target file name. To use the canned sequence, substitute the variable into the commands of a rule. You can substitute it like any other variable (see section Basics of Variable References). Because variables defined by define are recursively expanded variables, all the variable references you wrote inside the define are expanded now. For example: foo.c : foo.y (run-yacc)  foo.y' will be substituted for the variable ^' when it occurs in run-yacc's value, and foo.c' for @'. This is a realistic example, but this particular one is not needed in practice because make has an implicit rule to figure out these commands based on the file names involved (see section Using Implicit Rules). In command execution, each line of a canned sequence is treated just as if the line appeared on its own in the rule, preceded by a tab. In particular, make invokes a separate subshell for each line. You can use the special prefix characters that affect command lines (@', -', and +') on each line of a canned sequence. See section Writing the Commands in Rules. For example, using this canned sequence: define frobnicate @echo "frobnicating target @" frob-step-1 < -o @-step-1 frob-step-2 @-step-1 -o @ endef  make will not echo the first line, the echo command. But it will echo the following two command lines. On the other hand, prefix characters on the command line that refers to a canned sequence apply to every line in the sequence. So the rule: frob.out: frob.in @(frobnicate)  does not echo any commands. (See section Command Echoing, for a full explanation of @'.) ## Using Empty Commands It is sometimes useful to define commands which do nothing. This is done simply by giving a command that consists of nothing but whitespace. For example: target: ;  defines an empty command string for target'. You could also use a line beginning with a tab character to define an empty command string, but this would be confusing because such a line looks empty. You may be wondering why you would want to define a command string that does nothing. The only reason this is useful is to prevent a target from getting implicit commands (from implicit rules or the .DEFAULT special target; see section Using Implicit Rules and see section Defining Last-Resort Default Rules). You may be inclined to define empty command strings for targets that are not actual files, but only exist so that their dependencies can be remade. However, this is not the best way to do that, because the dependencies may not be remade properly if the target file actually does exist. See section Phony Targets, for a better way to do this. # How to Use Variables A variable is a name defined in a makefile to represent a string of text, called the variable's value. These values are substituted by explicit request into targets, dependencies, commands, and other parts of the makefile. (In some other versions of make, variables are called macros.) Variables and functions in all parts of a makefile are expanded when read, except for the shell commands in rules, the right-hand sides of variable definitions using =', and the bodies of variable definitions using the define directive. Variables can represent lists of file names, options to pass to compilers, programs to run, directories to look in for source files, directories to write output in, or anything else you can imagine. A variable name may be any sequence of characters not containing :', #', =', or leading or trailing whitespace. However, variable names containing characters other than letters, numbers, and underscores should be avoided, as they may be given special meanings in the future, and with some shells they cannot be passed through the environment to a sub-make (see section Communicating Variables to a Sub-make). Variable names are case-sensitive. The names foo', FOO', and Foo' all refer to different variables. It is traditional to use upper case letters in variable names, but we recommend using lower case letters for variable names that serve internal purposes in the makefile, and reserving upper case for parameters that control implicit rules or for parameters that the user should override with command options (see section Overriding Variables). A few variables have names that are a single punctuation character or just a few characters. These are the automatic variables, and they have particular specialized uses. See section Automatic Variables. ## Basics of Variable References To substitute a variable's value, write a dollar sign followed by the name of the variable in parentheses or braces: either (foo)' or {foo}' is a valid reference to the variable foo. This special significance of ' is why you must write $$' to have the effect of a single dollar sign in a file name or command. Variable references can be used in any context: targets, dependencies, commands, most directives, and new variable values. Here is an example of a common case, where a variable holds the names of all the object files in a program: objects = program.o foo.o utils.o program :$(objects)
cc -o program $(objects)$(objects) : defs.h


Variable references work by strict textual substitution. Thus, the rule

foo = c
prog.o : prog.$(foo)$(foo)$(foo) -$(foo) prog.$(foo)  could be used to compile a C program prog.c'. Since spaces before the variable value are ignored in variable assignments, the value of foo is precisely c'. (Don't actually write your makefiles this way!) A dollar sign followed by a character other than a dollar sign, open-parenthesis or open-brace treats that single character as the variable name. Thus, you could reference the variable x with $x'. However, this practice is strongly discouraged, except in the case of the automatic variables (see section Automatic Variables).

## The Two Flavors of Variables

There are two ways that a variable in GNU make can have a value; we call them the two flavors of variables. The two flavors are distinguished in how they are defined and in what they do when expanded.

The first flavor of variable is a recursively expanded variable. Variables of this sort are defined by lines using =' (see section Setting Variables) or by the define directive (see section Defining Variables Verbatim). The value you specify is installed verbatim; if it contains references to other variables, these references are expanded whenever this variable is substituted (in the course of expanding some other string). When this happens, it is called recursive expansion.

For example,

foo = $(bar) bar =$(ugh)
ugh = Huh?

all:;echo $(foo)  will echo Huh?': $(foo)' expands to $(bar)' which expands to $(ugh)' which finally expands to Huh?'.

This flavor of variable is the only sort supported by other versions of make. It has its advantages and its disadvantages. An advantage (most would say) is that:

CFLAGS = $(include_dirs) -O include_dirs = -Ifoo -Ibar  will do what was intended: when CFLAGS' is expanded in a command, it will expand to -Ifoo -Ibar -O'. A major disadvantage is that you cannot append something on the end of a variable, as in CFLAGS =$(CFLAGS) -O


because it will cause an infinite loop in the variable expansion. (Actually make detects the infinite loop and reports an error.)

Another disadvantage is that any functions (see section Functions for Transforming Text) referenced in the definition will be executed every time the variable is expanded. This makes make run slower; worse, it causes the wildcard and shell functions to give unpredictable results because you cannot easily control when they are called, or even how many times.

To avoid all the problems and inconveniences of recursively expanded variables, there is another flavor: simply expanded variables.

Simply expanded variables are defined by lines using :=' (see section Setting Variables). The value of a simply expanded variable is scanned once and for all, expanding any references to other variables and functions, when the variable is defined. The actual value of the simply expanded variable is the result of expanding the text that you write. It does not contain any references to other variables; it contains their values as of the time this variable was defined. Therefore,

x := foo
y := $(x) bar x := later  is equivalent to y := foo bar x := later  When a simply expanded variable is referenced, its value is substituted verbatim. Here is a somewhat more complicated example, illustrating the use of :=' in conjunction with the shell function. (See section The shell Function.) This example also shows use of the variable MAKELEVEL, which is changed when it is passed down from level to level. (See section Communicating Variables to a Sub-make, for information about MAKELEVEL.) ifeq (0,${MAKELEVEL})
cur-dir   := $(shell pwd) whoami :=$(shell whoami)
host-type := $(shell arch) MAKE :=${MAKE} host-type=${host-type} whoami=${whoami}
endif


An advantage of this use of :=' is that a typical descend into a directory' command then looks like this:

${subdirs}:${MAKE} cur-dir=${cur-dir}/$@ -C $@ all  Simply expanded variables generally make complicated makefile programming more predictable because they work like variables in most programming languages. They allow you to redefine a variable using its own value (or its value processed in some way by one of the expansion functions) and to use the expansion functions much more efficiently (see section Functions for Transforming Text). You can also use them to introduce controlled leading whitespace into variable values. Leading whitespace characters are discarded from your input before substitution of variable references and function calls; this means you can include leading spaces in a variable value by protecting them with variable references, like this: nullstring := space :=$(nullstring) # end of the line


Here the value of the variable space is precisely one space. The comment # end of the line' is included here just for clarity. Since trailing space characters are not stripped from variable values, just a space at the end of the line would have the same effect (but be rather hard to read). If you put whitespace at the end of a variable value, it is a good idea to put a comment like that at the end of the line to make your intent clear. Conversely, if you do not want any whitespace characters at the end of your variable value, you must remember not to put a random comment on the end of the line after some whitespace, such as this:

dir := /foo/bar    # directory to put the frobs in


Here the value of the variable dir is /foo/bar ' (with four trailing spaces), which was probably not the intention. (Imagine something like $(dir)/file' with this definition!) There is another assignment operator for variables, ?='. This is called a conditional variable assignment operator, because it only has an effect if the variable is not yet defined. This statement: FOO ?= bar  is exactly equivalent to this (see section The origin Function): ifeq ($(origin FOO), undefined)
FOO = bar
endif


Note that a variable set to an empty value is still defined, so ?=' will not set that variable.

## Advanced Features for Reference to Variables

This section describes some advanced features you can use to reference variables in more flexible ways.

### Substitution References

A substitution reference substitutes the value of a variable with alterations that you specify. It has the form $(var:a=b)' (or ${var:a=b}') and its meaning is to take the value of the variable var, replace every a at the end of a word with b in that value, and substitute the resulting string.

When we say "at the end of a word", we mean that a must appear either followed by whitespace or at the end of the value in order to be replaced; other occurrences of a in the value are unaltered. For example:

foo := a.o b.o c.o
bar := $(foo:.o=.c)  sets bar' to a.c b.c c.c'. See section Setting Variables. A substitution reference is actually an abbreviation for use of the patsubst expansion function (see section Functions for String Substitution and Analysis). We provide substitution references as well as patsubst for compatibility with other implementations of make. Another type of substitution reference lets you use the full power of the patsubst function. It has the same form $(var:a=b)' described above, except that now a must contain a single %' character. This case is equivalent to $(patsubst a,b,$(var))'. See section Functions for String Substitution and Analysis, for a description of the patsubst function.

For example:

foo := a.o b.o c.o
bar := $(foo:%.o=%.c)  sets bar' to a.c b.c c.c'. ### Computed Variable Names Computed variable names are a complicated concept needed only for sophisticated makefile programming. For most purposes you need not consider them, except to know that making a variable with a dollar sign in its name might have strange results. However, if you are the type that wants to understand everything, or you are actually interested in what they do, read on. Variables may be referenced inside the name of a variable. This is called a computed variable name or a nested variable reference. For example, x = y y = z a :=$($(x))  defines a as z': the $(x)' inside $($(x))' expands to y', so $($(x))' expands to $(y)' which in turn expands to z'. Here the name of the variable to reference is not stated explicitly; it is computed by expansion of $(x)'. The reference $(x)' here is nested within the outer variable reference. The previous example shows two levels of nesting, but any number of levels is possible. For example, here are three levels: x = y y = z z = u a :=$($($(x)))


Here the innermost $(x)' expands to y', so $($(x))' expands to $(y)' which in turn expands to z'; now we have $(z)', which becomes u'. References to recursively-expanded variables within a variable name are reexpanded in the usual fashion. For example: x =$(y)
y = z
z = Hello
a := $($(x))


defines a as Hello': $($(x))' becomes $($(y))' which becomes $(z)' which becomes Hello'. Nested variable references can also contain modified references and function invocations (see section Functions for Transforming Text), just like any other reference. For example, using the subst function (see section Functions for String Substitution and Analysis): x = variable1 variable2 := Hello y =$(subst 1,2,$(x)) z = y a :=$($($(z)))


eventually defines a as Hello'. It is doubtful that anyone would ever want to write a nested reference as convoluted as this one, but it works: $($($(z)))' expands to $($(y))' which becomes $($(subst 1,2,$(x)))'. This gets the value variable1' from x and changes it by substitution to variable2', so that the entire string becomes $(variable2)', a simple variable reference whose value is Hello'. A computed variable name need not consist entirely of a single variable reference. It can contain several variable references, as well as some invariant text. For example, a_dirs := dira dirb 1_dirs := dir1 dir2 a_files := filea fileb 1_files := file1 file2 ifeq "$(use_a)" "yes"
a1 := a
else
a1 := 1
endif

ifeq "$(use_dirs)" "yes" df := dirs else df := files endif dirs :=$($(a1)_$(df))


will give dirs the same value as a_dirs, 1_dirs, a_files or 1_files depending on the settings of use_a and use_dirs.

Computed variable names can also be used in substitution references:

a_objects := a.o b.o c.o
1_objects := 1.o 2.o 3.o

sources := $($(a1)_objects:.o=.c)


defines sources as either a.c b.c c.c' or 1.c 2.c 3.c', depending on the value of a1.

The only restriction on this sort of use of nested variable references is that they cannot specify part of the name of a function to be called. This is because the test for a recognized function name is done before the expansion of nested references. For example,

ifdef do_sort
func := sort
else
func := strip
endif

bar := a d b g q c

foo := $($(func) $(bar))  attempts to give foo' the value of the variable sort a d b g q c' or strip a d b g q c', rather than giving a d b g q c' as the argument to either the sort or the strip function. This restriction could be removed in the future if that change is shown to be a good idea. You can also use computed variable names in the left-hand side of a variable assignment, or in a define directive, as in: dir = foo$(dir)_sources := $(wildcard$(dir)/*.c)
FOO = bar
endif


## Appending More Text to Variables

Often it is useful to add more text to the value of a variable already defined. You do this with a line containing +=', like this:

objects += another.o


This takes the value of the variable objects, and adds the text another.o' to it (preceded by a single space). Thus:

objects = main.o foo.o bar.o utils.o
objects += another.o


sets objects to main.o foo.o bar.o utils.o another.o'.

Using +=' is similar to:

objects = main.o foo.o bar.o utils.o
objects := $(objects) another.o  but differs in ways that become important when you use more complex values. When the variable in question has not been defined before, +=' acts just like normal =': it defines a recursively-expanded variable. However, when there is a previous definition, exactly what +=' does depends on what flavor of variable you defined originally. See section The Two Flavors of Variables, for an explanation of the two flavors of variables. When you add to a variable's value with +=', make acts essentially as if you had included the extra text in the initial definition of the variable. If you defined it first with :=', making it a simply-expanded variable, +=' adds to that simply-expanded definition, and expands the new text before appending it to the old value just as :=' does (see section Setting Variables, for a full explanation of :='). In fact, variable := value variable += more  is exactly equivalent to: variable := value variable :=$(variable) more


On the other hand, when you use +=' with a variable that you defined first to be recursively-expanded using plain =', make does something a bit different. Recall that when you define a recursively-expanded variable, make does not expand the value you set for variable and function references immediately. Instead it stores the text verbatim, and saves these variable and function references to be expanded later, when you refer to the new variable (see section The Two Flavors of Variables). When you use +=' on a recursively-expanded variable, it is this unexpanded text to which make appends the new text you specify.

variable = value
variable += more


is roughly equivalent to:

temp = value
variable = $(temp) more  except that of course it never defines a variable called temp. The importance of this comes when the variable's old value contains variable references. Take this common example: CFLAGS =$(includes) -O
...
CFLAGS += -pg # enable profiling


The first line defines the CFLAGS variable with a reference to another variable, includes. (CFLAGS is used by the rules for C compilation; see section Catalogue of Implicit Rules.) Using =' for the definition makes CFLAGS a recursively-expanded variable, meaning $(includes) -O' is not expanded when make processes the definition of CFLAGS. Thus, includes need not be defined yet for its value to take effect. It only has to be defined before any reference to CFLAGS. If we tried to append to the value of CFLAGS without using +=', we might do it like this: CFLAGS :=$(CFLAGS) -pg # enable profiling


This is pretty close, but not quite what we want. Using :=' redefines CFLAGS as a simply-expanded variable; this means make expands the text $(CFLAGS) -pg' before setting the variable. If includes is not yet defined, we get  -O -pg', and a later definition of includes will have no effect. Conversely, by using +=' we set CFLAGS to the unexpanded value $(includes) -O -pg'. Thus we preserve the reference to includes, so if that variable gets defined at any later point, a reference like $(CFLAGS)' still uses its value. ## The override Directive If a variable has been set with a command argument (see section Overriding Variables), then ordinary assignments in the makefile are ignored. If you want to set the variable in the makefile even though it was set with a command argument, you can use an override directive, which is a line that looks like this: override variable = value  or override variable := value  To append more text to a variable defined on the command line, use: override variable += more text  See section Appending More Text to Variables. The override directive was not invented for escalation in the war between makefiles and command arguments. It was invented so you can alter and add to values that the user specifies with command arguments. For example, suppose you always want the -g' switch when you run the C compiler, but you would like to allow the user to specify the other switches with a command argument just as usual. You could use this override directive: override CFLAGS += -g  You can also use override directives with define directives. This is done as you might expect: override define foo bar endef  See the next section for information about define. ## Defining Variables Verbatim Another way to set the value of a variable is to use the define directive. This directive has an unusual syntax which allows newline characters to be included in the value, which is convenient for defining canned sequences of commands (see section Defining Canned Command Sequences). The define directive is followed on the same line by the name of the variable and nothing more. The value to give the variable appears on the following lines. The end of the value is marked by a line containing just the word endef. Aside from this difference in syntax, define works just like =': it creates a recursively-expanded variable (see section The Two Flavors of Variables). The variable name may contain function and variable references, which are expanded when the directive is read to find the actual variable name to use. define two-lines echo foo echo$(bar)
endef


The value in an ordinary assignment cannot contain a newline; but the newlines that separate the lines of the value in a define become part of the variable's value (except for the final newline which precedes the endef and is not considered part of the value).

The previous example is functionally equivalent to this:

two-lines = echo foo; echo $(bar)  since two commands separated by semicolon behave much like two separate shell commands. However, note that using two separate lines means make will invoke the shell twice, running an independent subshell for each line. See section Command Execution. If you want variable definitions made with define to take precedence over command-line variable definitions, you can use the override directive together with define: override define two-lines foo$(bar)
endef


See section The override Directive.

## Variables from the Environment

Variables in make can come from the environment in which make is run. Every environment variable that make sees when it starts up is transformed into a make variable with the same name and value. But an explicit assignment in the makefile, or with a command argument, overrides the environment. (If the -e' flag is specified, then values from the environment override assignments in the makefile. See section Summary of Options. But this is not recommended practice.)

Thus, by setting the variable CFLAGS in your environment, you can cause all C compilations in most makefiles to use the compiler switches you prefer. This is safe for variables with standard or conventional meanings because you know that no makefile will use them for other things. (But this is not totally reliable; some makefiles set CFLAGS explicitly and therefore are not affected by the value in the environment.)

When make is invoked recursively, variables defined in the outer invocation can be passed to inner invocations through the environment (see section Recursive Use of make). By default, only variables that came from the environment or the command line are passed to recursive invocations. You can use the export directive to pass other variables. See section Communicating Variables to a Sub-make, for full details.

Other use of variables from the environment is not recommended. It is not wise for makefiles to depend for their functioning on environment variables set up outside their control, since this would cause different users to get different results from the same makefile. This is against the whole purpose of most makefiles.

Such problems would be especially likely with the variable SHELL, which is normally present in the environment to specify the user's choice of interactive shell. It would be very undesirable for this choice to affect make. So make ignores the environment value of SHELL (except on MS-DOS and MS-Windows, where SHELL is usually not set. See section Command Execution.)

## Target-specific Variable Values

Variable values in make are usually global; that is, they are the same regardless of where they are evaluated (unless they're reset, of course). One exception to that is automatic variables (see section Automatic Variables).

The other exception is target-specific variable values. This feature allows you to define different values for the same variable, based on the target that make is currently building. As with automatic variables, these values are only available within the context of a target's command script (and in other target-specific assignments).

Set a target-specific variable value like this:

target ... : variable-assignment


or like this:

target ... : override variable-assignment


Multiple target values create a target-specific variable value for each member of the target list individually.

The variable-assignment can be any valid form of assignment; recursive (='), static (:='), appending (+='), or conditional (?='). All variables that appear within the variable-assignment are evaluated within the context of the target: thus, any previously-defined target-specific variable values will be in effect. Note that this variable is actually distinct from any "global" value: the two variables do not have to have the same flavor (recursive vs. static).

Target-specific variables have the same priority as any other makefile variable. Variables provided on the command-line (and in the environment if the -e' option is in force) will take precedence. Specifying the override directive will allow the target-specific variable value to be preferred.

There is one more special feature of target-specific variables: when you define a target-specific variable, that variable value is also in effect for all dependencies of this target (unless those dependencies override it with their own target-specific variable value). So, for example, a statement like this:

prog : CFLAGS = -g
prog : prog.o foo.o bar.o


will set CFLAGS to -g' in the command script for prog', but it will also set CFLAGS to -g' in the command scripts that create prog.o', foo.o', and bar.o', and any command scripts which create their dependencies.

## Pattern-specific Variable Values

In addition to target-specific variable values (see section Target-specific Variable Values), GNU make supports pattern-specific variable values. In this form, a variable is defined for any target that matches the pattern specified. Variables defined in this way are searched after any target-specific variables defined explicitly for that target, and before target-specific variables defined for the parent target.

Set a pattern-specific variable value like this:

pattern ... : variable-assignment


or like this:

pattern ... : override variable-assignment


where pattern is a %-pattern. As with target-specific variable values, multiple pattern values create a pattern-specific variable value for each pattern individually. The variable-assignment can be any valid form of assignment. Any command-line variable setting will take precedence, unless override is specified.

For example:

%.o : CFLAGS = -O


will assign CFLAGS the value of -O' for all targets matching the pattern %.o.

# Conditional Parts of Makefiles

A conditional causes part of a makefile to be obeyed or ignored depending on the values of variables. Conditionals can compare the value of one variable to another, or the value of a variable to a constant string. Conditionals control what make actually "sees" in the makefile, so they cannot be used to control shell commands at the time of execution.

## Example of a Conditional

The following example of a conditional tells make to use one set of libraries if the CC variable is gcc', and a different set of libraries otherwise. It works by controlling which of two command lines will be used as the command for a rule. The result is that CC=gcc' as an argument to make changes not only which compiler is used but also which libraries are linked.

libs_for_gcc = -lgnu
normal_libs =

foo: $(objects) ifeq ($(CC),gcc)
$(CC) -o foo$(objects) $(libs_for_gcc) else$(CC) -o foo $(objects)$(normal_libs)
endif


This conditional uses three directives: one ifeq, one else and one endif.

The ifeq directive begins the conditional, and specifies the condition. It contains two arguments, separated by a comma and surrounded by parentheses. Variable substitution is performed on both arguments and then they are compared. The lines of the makefile following the ifeq are obeyed if the two arguments match; otherwise they are ignored.

The else directive causes the following lines to be obeyed if the previous conditional failed. In the example above, this means that the second alternative linking command is used whenever the first alternative is not used. It is optional to have an else in a conditional.

The endif directive ends the conditional. Every conditional must end with an endif. Unconditional makefile text follows.

As this example illustrates, conditionals work at the textual level: the lines of the conditional are treated as part of the makefile, or ignored, according to the condition. This is why the larger syntactic units of the makefile, such as rules, may cross the beginning or the end of the conditional.

When the variable CC has the value gcc', the above example has this effect:

foo: $(objects)$(CC) -o foo $(objects)$(libs_for_gcc)


When the variable CC has any other value, the effect is this:

foo: $(objects)$(CC) -o foo $(objects)$(normal_libs)


Equivalent results can be obtained in another way by conditionalizing a variable assignment and then using the variable unconditionally:

libs_for_gcc = -lgnu
normal_libs =

ifeq ($(CC),gcc) libs=$(libs_for_gcc)
else
libs=$(normal_libs) endif foo:$(objects)
$(CC) -o foo$(objects) $(libs)  ## Syntax of Conditionals The syntax of a simple conditional with no else is as follows: conditional-directive text-if-true endif  The text-if-true may be any lines of text, to be considered as part of the makefile if the condition is true. If the condition is false, no text is used instead. The syntax of a complex conditional is as follows: conditional-directive text-if-true else text-if-false endif  If the condition is true, text-if-true is used; otherwise, text-if-false is used instead. The text-if-false can be any number of lines of text. The syntax of the conditional-directive is the same whether the conditional is simple or complex. There are four different directives that test different conditions. Here is a table of them: ifeq (arg1, arg2) ifeq 'arg1' 'arg2' ifeq "arg1" "arg2" ifeq "arg1" 'arg2' ifeq 'arg1' "arg2" Expand all variable references in arg1 and arg2 and compare them. If they are identical, the text-if-true is effective; otherwise, the text-if-false, if any, is effective. Often you want to test if a variable has a non-empty value. When the value results from complex expansions of variables and functions, expansions you would consider empty may actually contain whitespace characters and thus are not seen as empty. However, you can use the strip function (see section Functions for String Substitution and Analysis) to avoid interpreting whitespace as a non-empty value. For example: ifeq ($(strip $(foo)),) text-if-empty endif  will evaluate text-if-empty even if the expansion of $(foo) contains whitespace characters.
ifneq (arg1, arg2)
ifneq 'arg1' 'arg2'
ifneq "arg1" "arg2"
ifneq "arg1" 'arg2'
ifneq 'arg1' "arg2"
Expand all variable references in arg1 and arg2 and compare them. If they are different, the text-if-true is effective; otherwise, the text-if-false, if any, is effective.
ifdef variable-name
If the variable variable-name has a non-empty value, the text-if-true is effective; otherwise, the text-if-false, if any, is effective. Variables that have never been defined have an empty value. Note that ifdef only tests whether a variable has a value. It does not expand the variable to see if that value is nonempty. Consequently, tests using ifdef return true for all definitions except those like foo =. To test for an empty value, use ifeq ($(foo),). For example, bar = foo =$(bar)
ifdef foo
frobozz = yes
else
frobozz = no
endif

sets frobozz' to yes', while:
foo =
ifdef foo
frobozz = yes
else
frobozz = no
endif

sets frobozz' to no'.
ifndef variable-name
If the variable variable-name has an empty value, the text-if-true is effective; otherwise, the text-if-false, if any, is effective.

Extra spaces are allowed and ignored at the beginning of the conditional directive line, but a tab is not allowed. (If the line begins with a tab, it will be considered a command for a rule.) Aside from this, extra spaces or tabs may be inserted with no effect anywhere except within the directive name or within an argument. A comment starting with #' may appear at the end of the line.

The other two directives that play a part in a conditional are else and endif. Each of these directives is written as one word, with no arguments. Extra spaces are allowed and ignored at the beginning of the line, and spaces or tabs at the end. A comment starting with #' may appear at the end of the line.

Conditionals affect which lines of the makefile make uses. If the condition is true, make reads the lines of the text-if-true as part of the makefile; if the condition is false, make ignores those lines completely. It follows that syntactic units of the makefile, such as rules, may safely be split across the beginning or the end of the conditional.

make evaluates conditionals when it reads a makefile. Consequently, you cannot use automatic variables in the tests of conditionals because they are not defined until commands are run (see section Automatic Variables).

To prevent intolerable confusion, it is not permitted to start a conditional in one makefile and end it in another. However, you may write an include directive within a conditional, provided you do not attempt to terminate the conditional inside the included file.

## Conditionals that Test Flags

You can write a conditional that tests make command flags such as -t' by using the variable MAKEFLAGS together with the findstring function (see section Functions for String Substitution and Analysis). This is useful when touch is not enough to make a file appear up to date.

The findstring function determines whether one string appears as a substring of another. If you want to test for the -t' flag, use t' as the first string and the value of MAKEFLAGS as the other.

For example, here is how to arrange to use ranlib -t' to finish marking an archive file up to date:

archive.a: ...
ifneq (,$(findstring t,$(MAKEFLAGS)))
+touch archive.a
+ranlib -t archive.a
else
ranlib archive.a
endif


The +' prefix marks those command lines as "recursive" so that they will be executed despite use of the -t' flag. See section Recursive Use of make.

# Functions for Transforming Text

Functions allow you to do text processing in the makefile to compute the files to operate on or the commands to use. You use a function in a function call, where you give the name of the function and some text (the arguments) for the function to operate on. The result of the function's processing is substituted into the makefile at the point of the call, just as a variable might be substituted.

## Function Call Syntax

A function call resembles a variable reference. It looks like this:

$(function arguments)  or like this: ${function arguments}


Here function is a function name; one of a short list of names that are part of make. There is no provision for defining new functions.

The arguments are the arguments of the function. They are separated from the function name by one or more spaces or tabs, and if there is more than one argument, then they are separated by commas. Such whitespace and commas are not part of an argument's value. The delimiters which you use to surround the function call, whether parentheses or braces, can appear in an argument only in matching pairs; the other kind of delimiters may appear singly. If the arguments themselves contain other function calls or variable references, it is wisest to use the same kind of delimiters for all the references; write $(subst a,b,$(x))', not $(subst a,b,${x})'. This is because it is clearer, and because only one type of delimiter is matched to find the end of the reference.

The text written for each argument is processed by substitution of variables and function calls to produce the argument value, which is the text on which the function acts. The substitution is done in the order in which the arguments appear.

Commas and unmatched parentheses or braces cannot appear in the text of an argument as written; leading spaces cannot appear in the text of the first argument as written. These characters can be put into the argument value by variable substitution. First define variables comma and space whose values are isolated comma and space characters, then substitute these variables where such characters are wanted, like this:

comma:= ,
empty:=
space:= $(empty)$(empty)
foo:= a b c
bar:= $(subst$(space),$(comma),$(foo))
# bar is now a,b,c'.


Here the subst function replaces each space with a comma, through the value of foo, and substitutes the result.

## Functions for String Substitution and Analysis

Here are some functions that operate on strings:

$(subst from,to,text) Performs a textual replacement on the text text: each occurrence of from is replaced by to. The result is substituted for the function call. For example, $(subst ee,EE,feet on the street)

substitutes the string fEEt on the strEEt'.
$(patsubst pattern,replacement,text) Finds whitespace-separated words in text that match pattern and replaces them with replacement. Here pattern may contain a %' which acts as a wildcard, matching any number of any characters within a word. If replacement also contains a %', the %' is replaced by the text that matched the %' in pattern. %' characters in patsubst function invocations can be quoted with preceding backslashes (\'). Backslashes that would otherwise quote %' characters can be quoted with more backslashes. Backslashes that quote %' characters or other backslashes are removed from the pattern before it is compared file names or has a stem substituted into it. Backslashes that are not in danger of quoting %' characters go unmolested. For example, the pattern the\%weird\\%pattern\\' has the%weird\' preceding the operative %' character, and pattern\\' following it. The final two backslashes are left alone because they cannot affect any %' character. Whitespace between words is folded into single space characters; leading and trailing whitespace is discarded. For example, $(patsubst %.c,%.o,x.c.c bar.c)

produces the value x.c.o bar.o'. Substitution references (see section Substitution References) are a simpler way to get the effect of the patsubst function:
$(var:pattern=replacement)  is equivalent to $(patsubst pattern,replacement,$(var))  The second shorthand simplifies one of the most common uses of patsubst: replacing the suffix at the end of file names. $(var:suffix=replacement)

is equivalent to
$(patsubst %suffix,%replacement,$(var))

For example, you might have a list of object files:
objects = foo.o bar.o baz.o

To get the list of corresponding source files, you could simply write:
$(objects:.o=.c)  instead of using the general form: $(patsubst %.o,%.c,$(objects))  $(strip string)
Removes leading and trailing whitespace from string and replaces each internal sequence of one or more whitespace characters with a single space. Thus, $(strip a b c )' results in a b c'. The function strip can be very useful when used in conjunction with conditionals. When comparing something with the empty string ' using ifeq or ifneq, you usually want a string of just whitespace to match the empty string (see section Conditional Parts of Makefiles). Thus, the following may fail to have the desired results: .PHONY: all ifneq "$(needs_made)" ""
all: $(needs_made) else all:;@echo 'Nothing to make!' endif  Replacing the variable reference $(needs_made)' with the function call $(strip$(needs_made))' in the ifneq directive would make it more robust.
$(findstring find,in) Searches in for an occurrence of find. If it occurs, the value is find; otherwise, the value is empty. You can use this function in a conditional to test for the presence of a specific substring in a given string. Thus, the two examples, $(findstring a,a b c)
$(findstring a,b c)  produce the values a' and ' (the empty string), respectively. See section Conditionals that Test Flags, for a practical application of findstring. $(filter pattern...,text)
Removes all whitespace-separated words in text that do not match any of the pattern words, returning only matching words. The patterns are written using %', just like the patterns used in the patsubst function above. The filter function can be used to separate out different types of strings (such as file names) in a variable. For example:
sources := foo.c bar.c baz.s ugh.h
foo: $(sources) cc$(filter %.c %.s,$(sources)) -o foo  says that foo' depends of foo.c', bar.c', baz.s' and ugh.h' but only foo.c', bar.c' and baz.s' should be specified in the command to the compiler. $(filter-out pattern...,text)
Removes all whitespace-separated words in text that do match the pattern words, returning only the words that do not match. This is the exact opposite of the filter function. For example, given:
objects=main1.o foo.o main2.o bar.o
mains=main1.o main2.o

the following generates a list which contains all the object files not in mains':
$(filter-out$(mains),$(objects))  $(sort list)
Sorts the words of list in lexical order, removing duplicate words. The output is a list of words separated by single spaces. Thus,
$(sort foo bar lose)  returns the value bar foo lose'. Incidentally, since sort removes duplicate words, you can use it for this purpose even if you don't care about the sort order. Here is a realistic example of the use of subst and patsubst. Suppose that a makefile uses the VPATH variable to specify a list of directories that make should search for dependency files (see section VPATH: Search Path for All Dependencies). This example shows how to tell the C compiler to search for header files in the same list of directories. The value of VPATH is a list of directories separated by colons, such as src:../headers'. First, the subst function is used to change the colons to spaces: $(subst :, ,$(VPATH))  This produces src ../headers'. Then patsubst is used to turn each directory name into a -I' flag. These can be added to the value of the variable CFLAGS, which is passed automatically to the C compiler, like this: override CFLAGS +=$(patsubst %,-I%,$(subst :, ,$(VPATH)))


The effect is to append the text -Isrc -I../headers' to the previously given value of CFLAGS. The override directive is used so that the new value is assigned even if the previous value of CFLAGS was specified with a command argument (see section The override Directive).

## Functions for File Names

Several of the built-in expansion functions relate specifically to taking apart file names or lists of file names.

Each of the following functions performs a specific transformation on a file name. The argument of the function is regarded as a series of file names, separated by whitespace. (Leading and trailing whitespace is ignored.) Each file name in the series is transformed in the same way and the results are concatenated with single spaces between them.

$(dir names...) Extracts the directory-part of each file name in names. The directory-part of the file name is everything up through (and including) the last slash in it. If the file name contains no slash, the directory part is the string ./'. For example, $(dir src/foo.c hacks)

produces the result src/ ./'.
$(notdir names...) Extracts all but the directory-part of each file name in names. If the file name contains no slash, it is left unchanged. Otherwise, everything through the last slash is removed from it. A file name that ends with a slash becomes an empty string. This is unfortunate, because it means that the result does not always have the same number of whitespace-separated file names as the argument had; but we do not see any other valid alternative. For example, $(notdir src/foo.c hacks)

produces the result foo.c hacks'.
$(suffix names...) Extracts the suffix of each file name in names. If the file name contains a period, the suffix is everything starting with the last period. Otherwise, the suffix is the empty string. This frequently means that the result will be empty when names is not, and if names contains multiple file names, the result may contain fewer file names. For example, $(suffix src/foo.c src-1.0/bar.c hacks)

produces the result .c .c'.
$(basename names...) Extracts all but the suffix of each file name in names. If the file name contains a period, the basename is everything starting up to (and not including) the last period. Periods in the directory part are ignored. If there is no period, the basename is the entire file name. For example, $(basename src/foo.c src-1.0/bar hacks)

produces the result src/foo src-1.0/bar hacks'.
$(addsuffix suffix,names...) The argument names is regarded as a series of names, separated by whitespace; suffix is used as a unit. The value of suffix is appended to the end of each individual name and the resulting larger names are concatenated with single spaces between them. For example, $(addsuffix .c,foo bar)

produces the result foo.c bar.c'.
$(addprefix prefix,names...) The argument names is regarded as a series of names, separated by whitespace; prefix is used as a unit. The value of prefix is prepended to the front of each individual name and the resulting larger names are concatenated with single spaces between them. For example, $(addprefix src/,foo bar)

produces the result src/foo src/bar'.
$(join list1,list2) Concatenates the two arguments word by word: the two first words (one from each argument) concatenated form the first word of the result, the two second words form the second word of the result, and so on. So the nth word of the result comes from the nth word of each argument. If one argument has more words that the other, the extra words are copied unchanged into the result. For example, $(join a b,.c .o)' produces a.c b.o'. Whitespace between the words in the lists is not preserved; it is replaced with a single space. This function can merge the results of the dir and notdir functions, to produce the original list of files which was given to those two functions.
$(word n,text) Returns the nth word of text. The legitimate values of n start from 1. If n is bigger than the number of words in text, the value is empty. For example, $(word 2, foo bar baz)

returns bar'.
$(wordlist s,e,text) Returns the list of words in text starting with word s and ending with word e (inclusive). The legitimate values of s and e start from 1. If s is bigger than the number of words in text, the value is empty. If e is bigger than the number of words in text, words up to the end of text are returned. If s is greater than e, make swaps them for you. For example, $(wordlist 2, 3, foo bar baz)

returns bar baz'.
$(words text) Returns the number of words in text. Thus, the last word of text is $(word $(words text),text). $(firstword names...)
The argument names is regarded as a series of names, separated by whitespace. The value is the first name in the series. The rest of the names are ignored. For example,
$(firstword foo bar)  produces the result foo'. Although $(firstword text) is the same as $(word 1,text), the firstword function is retained for its simplicity. $(wildcard pattern)
The argument pattern is a file name pattern, typically containing wildcard characters (as in shell file name patterns). The result of wildcard is a space-separated list of the names of existing files that match the pattern. See section Using Wildcard Characters in File Names.

## The foreach Function

The foreach function is very different from other functions. It causes one piece of text to be used repeatedly, each time with a different substitution performed on it. It resembles the for command in the shell sh and the foreach command in the C-shell csh.

The syntax of the foreach function is:

$(foreach var,list,text)  The first two arguments, var and list, are expanded before anything else is done; note that the last argument, text, is not expanded at the same time. Then for each word of the expanded value of list, the variable named by the expanded value of var is set to that word, and text is expanded. Presumably text contains references to that variable, so its expansion will be different each time. The result is that text is expanded as many times as there are whitespace-separated words in list. The multiple expansions of text are concatenated, with spaces between them, to make the result of foreach. This simple example sets the variable files' to the list of all files in the directories in the list dirs': dirs := a b c d files :=$(foreach dir,$(dirs),$(wildcard $(dir)/*))  Here text is $(wildcard $(dir)/*)'. The first repetition finds the value a' for dir, so it produces the same result as $(wildcard a/*)'; the second repetition produces the result of $(wildcard b/*)'; and the third, that of $(wildcard c/*)'.

This example has the same result (except for setting dirs') as the following example:

files := $(wildcard a/* b/* c/* d/*)  When text is complicated, you can improve readability by giving it a name, with an additional variable: find_files =$(wildcard $(dir)/*) dirs := a b c d files :=$(foreach dir,$(dirs),$(find_files))


Here we use the variable find_files this way. We use plain =' to define a recursively-expanding variable, so that its value contains an actual function call to be reexpanded under the control of foreach; a simply-expanded variable would not do, since wildcard would be called only once at the time of defining find_files.

The foreach function has no permanent effect on the variable var; its value and flavor after the foreach function call are the same as they were beforehand. The other values which are taken from list are in effect only temporarily, during the execution of foreach. The variable var is a simply-expanded variable during the execution of foreach. If var was undefined before the foreach function call, it is undefined after the call. See section The Two Flavors of Variables.

You must take care when using complex variable expressions that result in variable names because many strange things are valid variable names, but are probably not what you intended. For example,

files := $(foreach Esta escrito en espanol!,b c ch,$(find_files))


might be useful if the value of find_files references the variable whose name is Esta escrito en espanol!' (es un nombre bastante largo, no?), but it is more likely to be a mistake.

## The origin Function

The origin function is unlike most other functions in that it does not operate on the values of variables; it tells you something about a variable. Specifically, it tells you where it came from.

The syntax of the origin function is:

$(origin variable)  Note that variable is the name of a variable to inquire about; not a reference to that variable. Therefore you would not normally use a $' or parentheses when writing it. (You can, however, use a variable reference in the name if you want the name not to be a constant.)

The result of this function is a string telling you how the variable variable was defined:

undefined'
if variable was never defined.
default'
if variable has a default definition, as is usual with CC and so on. See section Variables Used by Implicit Rules. Note that if you have redefined a default variable, the origin function will return the origin of the later definition.
environment'
if variable was defined as an environment variable and the -e' option is not turned on (see section Summary of Options).
environment override'
if variable was defined as an environment variable and the -e' option is turned on (see section Summary of Options).
file'
if variable was defined in a makefile.
command line'
if variable was defined on the command line.
override'
if variable was defined with an override directive in a makefile (see section The override Directive).
automatic'
if variable is an automatic variable defined for the execution of the commands for each rule (see section Automatic Variables).

This information is primarily useful (other than for your curiosity) to determine if you want to believe the value of a variable. For example, suppose you have a makefile foo' that includes another makefile bar'. You want a variable bletch to be defined in bar' if you run the command make -f bar', even if the environment contains a definition of bletch. However, if foo' defined bletch before including bar', you do not want to override that definition. This could be done by using an override directive in foo', giving that definition precedence over the later definition in bar'; unfortunately, the override directive would also override any command line definitions. So, bar' could include:

ifdef bletch
ifeq "$(origin bletch)" "environment" bletch = barf, gag, etc. endif endif  If bletch has been defined from the environment, this will redefine it. If you want to override a previous definition of bletch if it came from the environment, even under -e', you could instead write: ifneq "$(findstring environment,$(origin bletch))" "" bletch = barf, gag, etc. endif  Here the redefinition takes place if $(origin bletch)' returns either environment' or environment override'. See section Functions for String Substitution and Analysis.

## The shell Function

The shell function is unlike any other function except the wildcard function (see section The Function wildcard) in that it communicates with the world outside of make.

The shell function performs the same function that backquotes (') perform in most shells: it does command expansion. This means that it takes an argument that is a shell command and returns the output of the command. The only processing make does on the result, before substituting it into the surrounding text, is to convert each newline or carriage-return / newline pair to a single space. It also removes the trailing (carriage-return and) newline, if it's the last thing in the result.

The commands run by calls to the shell function are run when the function calls are expanded. In most cases, this is when the makefile is read in. The exception is that function calls in the commands of the rules are expanded when the commands are run, and this applies to shell function calls like all others.

Here are some examples of the use of the shell function:

contents := $(shell cat foo)  sets contents to the contents of the file foo', with a space (rather than a newline) separating each line. files :=$(shell echo *.c)


include $(sources:.c=.d) endif  One use of specifying a goal is if you want to compile only a part of the program, or only one of several programs. Specify as a goal each file that you wish to remake. For example, consider a directory containing several programs, with a makefile that starts like this: .PHONY: all all: size nm ld ar as  If you are working on the program size, you might want to say make size' so that only the files of that program are recompiled. Another use of specifying a goal is to make files that are not normally made. For example, there may be a file of debugging output, or a version of the program that is compiled specially for testing, which has a rule in the makefile but is not a dependency of the default goal. Another use of specifying a goal is to run the commands associated with a phony target (see section Phony Targets) or empty target (see section Empty Target Files to Record Events). Many makefiles contain a phony target named clean' which deletes everything except source files. Naturally, this is done only if you request it explicitly with make clean'. Following is a list of typical phony and empty target names. See section Standard Targets for Users, for a detailed list of all the standard target names which GNU software packages use. all' Make all the top-level targets the makefile knows about. clean' Delete all files that are normally created by running make. mostlyclean' Like clean', but may refrain from deleting a few files that people normally don't want to recompile. For example, the mostlyclean' target for GCC does not delete libgcc.a', because recompiling it is rarely necessary and takes a lot of time. distclean' realclean' clobber' Any of these targets might be defined to delete more files than clean' does. For example, this would delete configuration files or links that you would normally create as preparation for compilation, even if the makefile itself cannot create these files. install' Copy the executable file into a directory that users typically search for commands; copy any auxiliary files that the executable uses into the directories where it will look for them. print' Print listings of the source files that have changed. tar' Create a tar file of the source files. shar' Create a shell archive (shar file) of the source files. dist' Create a distribution file of the source files. This might be a tar file, or a shar file, or a compressed version of one of the above, or even more than one of the above. TAGS' Update a tags table for this program. check' test' Perform self tests on the program this makefile builds. ## Instead of Executing the Commands The makefile tells make how to tell whether a target is up to date, and how to update each target. But updating the targets is not always what you want. Certain options specify other activities for make. -n' --just-print' --dry-run' --recon' "No-op". The activity is to print what commands would be used to make the targets up to date, but not actually execute them. -t' --touch' "Touch". The activity is to mark the targets as up to date without actually changing them. In other words, make pretends to compile the targets but does not really change their contents. -q' --question' "Question". The activity is to find out silently whether the targets are up to date already; but execute no commands in either case. In other words, neither compilation nor output will occur. -W file' --what-if=file' --assume-new=file' --new-file=file' "What if". Each -W' flag is followed by a file name. The given files' modification times are recorded by make as being the present time, although the actual modification times remain the same. You can use the -W' flag in conjunction with the -n' flag to see what would happen if you were to modify specific files. With the -n' flag, make prints the commands that it would normally execute but does not execute them. With the -t' flag, make ignores the commands in the rules and uses (in effect) the command touch for each target that needs to be remade. The touch command is also printed, unless -s' or .SILENT is used. For speed, make does not actually invoke the program touch. It does the work directly. With the -q' flag, make prints nothing and executes no commands, but the exit status code it returns is zero if and only if the targets to be considered are already up to date. If the exit status is one, then some updating needs to be done. If make encounters an error, the exit status is two, so you can distinguish an error from a target that is not up to date. It is an error to use more than one of these three flags in the same invocation of make. The -n', -t', and -q' options do not affect command lines that begin with +' characters or contain the strings $(MAKE)' or ${MAKE}'. Note that only the line containing the +' character or the strings $(MAKE)' or ${MAKE}' is run regardless of these options. Other lines in the same rule are not run unless they too begin with +' or contain $(MAKE)' or ${MAKE}' (See section How the MAKE Variable Works.) The -W' flag provides two features: • If you also use the -n' or -q' flag, you can see what make would do if you were to modify some files. • Without the -n' or -q' flag, when make is actually executing commands, the -W' flag can direct make to act as if some files had been modified, without actually modifying the files. Note that the options -p' and -v' allow you to obtain other information about make or about the makefiles in use (see section Summary of Options). ## Avoiding Recompilation of Some Files Sometimes you may have changed a source file but you do not want to recompile all the files that depend on it. For example, suppose you add a macro or a declaration to a header file that many other files depend on. Being conservative, make assumes that any change in the header file requires recompilation of all dependent files, but you know that they do not need to be recompiled and you would rather not waste the time waiting for them to compile. If you anticipate the problem before changing the header file, you can use the -t' flag. This flag tells make not to run the commands in the rules, but rather to mark the target up to date by changing its last-modification date. You would follow this procedure: 1. Use the command make' to recompile the source files that really need recompilation. 2. Make the changes in the header files. 3. Use the command make -t' to mark all the object files as up to date. The next time you run make, the changes in the header files will not cause any recompilation. If you have already changed the header file at a time when some files do need recompilation, it is too late to do this. Instead, you can use the -o file' flag, which marks a specified file as "old" (see section Summary of Options). This means that the file itself will not be remade, and nothing else will be remade on its account. Follow this procedure: 1. Recompile the source files that need compilation for reasons independent of the particular header file, with make -o headerfile'. If several header files are involved, use a separate -o' option for each header file. 2. Touch all the object files with make -t'. ## Overriding Variables An argument that contains =' specifies the value of a variable: v=x' sets the value of the variable v to x. If you specify a value in this way, all ordinary assignments of the same variable in the makefile are ignored; we say they have been overridden by the command line argument. The most common way to use this facility is to pass extra flags to compilers. For example, in a properly written makefile, the variable CFLAGS is included in each command that runs the C compiler, so a file foo.c' would be compiled something like this: cc -c$(CFLAGS) foo.c


Thus, whatever value you set for CFLAGS affects each compilation that occurs. The makefile probably specifies the usual value for CFLAGS, like this:

CFLAGS=-g


Each time you run make, you can override this value if you wish. For example, if you say make CFLAGS='-g -O'', each C compilation will be done with cc -c -g -O'. (This illustrates how you can use quoting in the shell to enclose spaces and other special characters in the value of a variable when you override it.)

The variable CFLAGS is only one of many standard variables that exist just so that you can change them this way. See section Variables Used by Implicit Rules, for a complete list.

You can also program the makefile to look at additional variables of your own, giving the user the ability to control other aspects of how the makefile works by changing the variables.

When you override a variable with a command argument, you can define either a recursively-expanded variable or a simply-expanded variable. The examples shown above make a recursively-expanded variable; to make a simply-expanded variable, write :=' instead of ='. But, unless you want to include a variable reference or function call in the value that you specify, it makes no difference which kind of variable you create.

There is one way that the makefile can change a variable that you have overridden. This is to use the override directive, which is a line that looks like this: override variable = value' (see section The override Directive).

## Testing the Compilation of a Program

Normally, when an error happens in executing a shell command, make gives up immediately, returning a nonzero status. No further commands are executed for any target. The error implies that the goal cannot be correctly remade, and make reports this as soon as it knows.

When you are compiling a program that you have just changed, this is not what you want. Instead, you would rather that make try compiling every file that can be tried, to show you as many compilation errors as possible.

On these occasions, you should use the -k' or --keep-going' flag. This tells make to continue to consider the other dependencies of the pending targets, remaking them if necessary, before it gives up and returns nonzero status. For example, after an error in compiling one object file, make -k' will continue compiling other object files even though it already knows that linking them will be impossible. In addition to continuing after failed shell commands, make -k' will continue as much as possible after discovering that it does not know how to make a target or dependency file. This will always cause an error message, but without -k', it is a fatal error (see section Summary of Options).

The usual behavior of make assumes that your purpose is to get the goals up to date; once make learns that this is impossible, it might as well report the failure immediately. The -k' flag says that the real purpose is to test as much as possible of the changes made in the program, perhaps to find several independent problems so that you can correct them all before the next attempt to compile. This is why Emacs' M-x compile command passes the -k' flag by default.

## Summary of Options

Here is a table of all the options make understands:

-b'
-m'
These options are ignored for compatibility with other versions of make.
-C dir'
--directory=dir'
Change to directory dir before reading the makefiles. If multiple -C' options are specified, each is interpreted relative to the previous one: -C / -C etc' is equivalent to -C /etc'. This is typically used with recursive invocations of make (see section Recursive Use of make).
-d'
--debug'
Print debugging information in addition to normal processing. The debugging information says which files are being considered for remaking, which file-times are being compared and with what results, which files actually need to be remade, which implicit rules are considered and which are applied--everything interesting about how make decides what to do.
-e'
--environment-overrides'
Give variables taken from the environment precedence over variables from makefiles. See section Variables from the Environment.
-f file'
--file=file'
--makefile=file'
Read the file named file as a makefile. See section Writing Makefiles.
-h'
--help'
Remind you of the options that make understands and then exit.
-i'
--ignore-errors'
Ignore all errors in commands executed to remake files. See section Errors in Commands.
-I dir'
--include-dir=dir'
Specifies a directory dir to search for included makefiles. See section Including Other Makefiles. If several -I' options are used to specify several directories, the directories are searched in the order specified.
-j [jobs]'
--jobs=[jobs]'
Specifies the number of jobs (commands) to run simultaneously. With no argument, make runs as many jobs simultaneously as possible. If there is more than one -j' option, the last one is effective. See section Parallel Execution, for more information on how commands are run. Note that this option is ignored on MS-DOS.
-k'
--keep-going'
Continue as much as possible after an error. While the target that failed, and those that depend on it, cannot be remade, the other dependencies of these targets can be processed all the same. See section Testing the Compilation of a Program.
-l [load]'
--max-load[=load]'
Specifies that no new jobs (commands) should be started if there are other jobs running and the load average is at least load (a floating-point number). With no argument, removes a previous load limit. See section Parallel Execution.
-n'
--just-print'
--dry-run'
--recon'
Print the commands that would be executed, but do not execute them. See section Instead of Executing the Commands.
-o file'
--old-file=file'
--assume-old=file'
Do not remake the file file even if it is older than its dependencies, and do not remake anything on account of changes in file. Essentially the file is treated as very old and its rules are ignored. See section Avoiding Recompilation of Some Files.
-p'
--print-data-base'
Print the data base (rules and variable values) that results from reading the makefiles; then execute as usual or as otherwise specified. This also prints the version information given by the -v' switch (see below). To print the data base without trying to remake any files, use make -p -f /dev/null'.
-q'
--question'
"Question mode". Do not run any commands, or print anything; just return an exit status that is zero if the specified targets are already up to date, one if any remaking is required, or two if an error is encountered. See section Instead of Executing the Commands.
-r'
--no-builtin-rules'
Eliminate use of the built-in implicit rules (see section Using Implicit Rules). You can still define your own by writing pattern rules (see section Defining and Redefining Pattern Rules). The -r' option also clears out the default list of suffixes for suffix rules (see section Old-Fashioned Suffix Rules). But you can still define your own suffixes with a rule for .SUFFIXES, and then define your own suffix rules. Note that only rules are affected by the -r option; default variables remain in effect (see section Variables Used by Implicit Rules).
-s'
--silent'
--quiet'
Silent operation; do not print the commands as they are executed. See section Command Echoing.
-S'
--no-keep-going'
--stop'
Cancel the effect of the -k' option. This is never necessary except in a recursive make where -k' might be inherited from the top-level make via MAKEFLAGS (see section Recursive Use of make) or if you set -k' in MAKEFLAGS in your environment.
-t'
--touch'
Touch files (mark them up to date without really changing them) instead of running their commands. This is used to pretend that the commands were done, in order to fool future invocations of make. See section Instead of Executing the Commands.
-v'
--version'
Print the version of the make program plus a copyright, a list of authors, and a notice that there is no warranty; then exit.
-w'
--print-directory'
Print a message containing the working directory both before and after executing the makefile. This may be useful for tracking down errors from complicated nests of recursive make commands. See section Recursive Use of make. (In practice, you rarely need to specify this option since make' does it for you; see section The --print-directory' Option.)
--no-print-directory'
Disable printing of the working directory under -w. This option is useful when -w is turned on automatically, but you do not want to see the extra messages. See section The --print-directory' Option.
-W file'
--what-if=file'
--new-file=file'
--assume-new=file'
Pretend that the target file has just been modified. When used with the -n' flag, this shows you what would happen if you were to modify that file. Without -n', it is almost the same as running a touch command on the given file before running make, except that the modification time is changed only in the imagination of make. See section Instead of Executing the Commands.
--warn-undefined-variables'
Issue a warning message whenever make sees a reference to an undefined variable. This can be helpful when you are trying to debug makefiles which use variables in complex ways.

# Using Implicit Rules

Certain standard ways of remaking target files are used very often. For example, one customary way to make an object file is from a C source file using the C compiler, cc.

Implicit rules tell make how to use customary techniques so that you do not have to specify them in detail when you want to use them. For example, there is an implicit rule for C compilation. File names determine which implicit rules are run. For example, C compilation typically takes a .c' file and makes a .o' file. So make applies the implicit rule for C compilation when it sees this combination of file name endings.

A chain of implicit rules can apply in sequence; for example, make will remake a .o' file from a .y' file by way of a .c' file. See section Chains of Implicit Rules.

The built-in implicit rules use several variables in their commands so that, by changing the values of the variables, you can change the way the implicit rule works. For example, the variable CFLAGS controls the flags given to the C compiler by the implicit rule for C compilation. See section Variables Used by Implicit Rules.

You can define your own implicit rules by writing pattern rules. See section Defining and Redefining Pattern Rules.

Suffix rules are a more limited way to define implicit rules. Pattern rules are more general and clearer, but suffix rules are retained for compatibility. See section Old-Fashioned Suffix Rules.

## Using Implicit Rules

To allow make to find a customary method for updating a target file, all you have to do is refrain from specifying commands yourself. Either write a rule with no command lines, or don't write a rule at all. Then make will figure out which implicit rule to use based on which kind of source file exists or can be made.

For example, suppose the makefile looks like this:

foo : foo.o bar.o
cc -o foo foo.o bar.o $(CFLAGS)$(LDFLAGS)


Because you mention foo.o' but do not give a rule for it, make will automatically look for an implicit rule that tells how to update it. This happens whether or not the file foo.o' currently exists.

If an implicit rule is found, it can supply both commands and one or more dependencies (the source files). You would want to write a rule for foo.o' with no command lines if you need to specify additional dependencies, such as header files, that the implicit rule cannot supply.

Each implicit rule has a target pattern and dependency patterns. There may be many implicit rules with the same target pattern. For example, numerous rules make .o' files: one, from a .c' file with the C compiler; another, from a .p' file with the Pascal compiler; and so on. The rule that actually applies is the one whose dependencies exist or can be made. So, if you have a file foo.c', make will run the C compiler; otherwise, if you have a file foo.p', make will run the Pascal compiler; and so on.

Of course, when you write the makefile, you know which implicit rule you want make to use, and you know it will choose that one because you know which possible dependency files are supposed to exist. See section Catalogue of Implicit Rules, for a catalogue of all the predefined implicit rules.

Above, we said an implicit rule applies if the required dependencies "exist or can be made". A file "can be made" if it is mentioned explicitly in the makefile as a target or a dependency, or if an implicit rule can be recursively found for how to make it. When an implicit dependency is the result of another implicit rule, we say that chaining is occurring. See section Chains of Implicit Rules.

In general, make searches for an implicit rule for each target, and for each double-colon rule, that has no commands. A file that is mentioned only as a dependency is considered a target whose rule specifies nothing, so implicit rule search happens for it. See section Implicit Rule Search Algorithm, for the details of how the search is done.

Note that explicit dependencies do not influence implicit rule search. For example, consider this explicit rule:

foo.o: foo.p


The dependency on foo.p' does not necessarily mean that make will remake foo.o' according to the implicit rule to make an object file, a .o' file, from a Pascal source file, a .p' file. For example, if foo.c' also exists, the implicit rule to make an object file from a C source file is used instead, because it appears before the Pascal rule in the list of predefined implicit rules (see section Catalogue of Implicit Rules).

If you do not want an implicit rule to be used for a target that has no commands, you can give that target empty commands by writing a semicolon (see section Using Empty Commands).

## Catalogue of Implicit Rules

Here is a catalogue of predefined implicit rules which are always available unless the makefile explicitly overrides or cancels them. See section Canceling Implicit Rules, for information on canceling or overriding an implicit rule. The -r' or --no-builtin-rules' option cancels all predefined rules.

Not all of these rules will always be defined, even when the -r' option is not given. Many of the predefined implicit rules are implemented in make as suffix rules, so which ones will be defined depends on the suffix list (the list of dependencies of the special target .SUFFIXES). The default suffix list is: .out, .a, .ln, .o, .c, .cc, .C, .p, .f, .F, .r, .y, .l, .s, .S, .mod, .sym, .def, .h, .info, .dvi, .tex, .texinfo, .texi, .txinfo, .w, .ch .web, .sh, .elc, .el. All of the implicit rules described below whose dependencies have one of these suffixes are actually suffix rules. If you modify the suffix list, the only predefined suffix rules in effect will be those named by one or two of the suffixes that are on the list you specify; rules whose suffixes fail to be on the list are disabled. See section Old-Fashioned Suffix Rules, for full details on suffix rules.

Compiling C programs
n.o' is made automatically from n.c' with a command of the form $(CC) -c$(CPPFLAGS) $(CFLAGS)'. Compiling C++ programs n.o' is made automatically from n.cc' or n.C' with a command of the form $(CXX) -c $(CPPFLAGS)$(CXXFLAGS)'. We encourage you to use the suffix .cc' for C++ source files instead of .C'.
Compiling Pascal programs
n.o' is made automatically from n.p' with the command $(PC) -c$(PFLAGS)'.
Compiling Fortran and Ratfor programs
n.o' is made automatically from n.r', n.F' or n.f' by running the Fortran compiler. The precise command used is as follows:
.f'
$(FC) -c$(FFLAGS)'.
.F'
$(FC) -c$(FFLAGS) $(CPPFLAGS)'. .r' $(FC) -c $(FFLAGS)$(RFLAGS)'.
Preprocessing Fortran and Ratfor programs
n.f' is made automatically from n.r' or n.F'. This rule runs just the preprocessor to convert a Ratfor or preprocessable Fortran program into a strict Fortran program. The precise command used is as follows:
.F'
$(FC) -F$(CPPFLAGS) $(FFLAGS)'. .r' $(FC) -F $(FFLAGS)$(RFLAGS)'.
Compiling Modula-2 programs
n.sym' is made from n.def' with a command of the form $(M2C)$(M2FLAGS) $(DEFFLAGS)'. n.o' is made from n.mod'; the form is: $(M2C) $(M2FLAGS)$(MODFLAGS)'.
Assembling and preprocessing assembler programs
n.o' is made automatically from n.s' by running the assembler, as. The precise command is $(AS)$(ASFLAGS)'. n.s' is made automatically from n.S' by running the C preprocessor, cpp. The precise command is $(CPP)$(CPPFLAGS)'.
n' is made automatically from n.o' by running the linker (usually called ld) via the C compiler. The precise command used is $(CC)$(LDFLAGS) n.o $(LOADLIBES)'. This rule does the right thing for a simple program with only one source file. It will also do the right thing if there are multiple object files (presumably coming from various other source files), one of which has a name matching that of the executable file. Thus, x: y.o z.o  when x.c', y.c' and z.c' all exist will execute: cc -c x.c -o x.o cc -c y.c -o y.o cc -c z.c -o z.o cc x.o y.o z.o -o x rm -f x.o rm -f y.o rm -f z.o  In more complicated cases, such as when there is no object file whose name derives from the executable file name, you must write an explicit command for linking. Each kind of file automatically made into .o' object files will be automatically linked by using the compiler ($(CC)', $(FC)' or $(PC)'; the C compiler $(CC)' is used to assemble .s' files) without the -c' option. This could be done by using the .o' object files as intermediates, but it is faster to do the compiling and linking in one step, so that's how it's done. Yacc for C programs n.c' is made automatically from n.y' by running Yacc with the command $(YACC) $(YFLAGS)'. Lex for C programs n.c' is made automatically from n.l' by by running Lex. The actual command is $(LEX) $(LFLAGS)'. Lex for Ratfor programs n.r' is made automatically from n.l' by by running Lex. The actual command is $(LEX) $(LFLAGS)'. The convention of using the same suffix .l' for all Lex files regardless of whether they produce C code or Ratfor code makes it impossible for make to determine automatically which of the two languages you are using in any particular case. If make is called upon to remake an object file from a .l' file, it must guess which compiler to use. It will guess the C compiler, because that is more common. If you are using Ratfor, make sure make knows this by mentioning n.r' in the makefile. Or, if you are using Ratfor exclusively, with no C files, remove .c' from the list of implicit rule suffixes with: .SUFFIXES: .SUFFIXES: .o .r .f .l ...  Making Lint Libraries from C, Yacc, or Lex programs n.ln' is made from n.c' by running lint. The precise command is $(LINT) $(LINTFLAGS)$(CPPFLAGS) -i'. The same command is used on the C code produced from n.y' or n.l'.
TeX and Web
n.dvi' is made from n.tex' with the command $(TEX)'. n.tex' is made from n.web' with $(WEAVE)', or from n.w' (and from n.ch' if it exists or can be made) with $(CWEAVE)'. n.p' is made from n.web' with $(TANGLE)' and n.c' is made from n.w' (and from n.ch' if it exists or can be made) with $(CTANGLE)'. Texinfo and Info n.dvi' is made from n.texinfo', n.texi', or n.txinfo', with the command $(TEXI2DVI) $(TEXI2DVI_FLAGS)'. n.info' is made from n.texinfo', n.texi', or n.txinfo', with the command $(MAKEINFO) $(MAKEINFO_FLAGS)'. RCS Any file n' is extracted if necessary from an RCS file named either n,v' or RCS/n,v'. The precise command used is $(CO) $(COFLAGS)'. n' will not be extracted from RCS if it already exists, even if the RCS file is newer. The rules for RCS are terminal (see section Match-Anything Pattern Rules), so RCS files cannot be generated from another source; they must actually exist. SCCS Any file n' is extracted if necessary from an SCCS file named either s.n' or SCCS/s.n'. The precise command used is $(GET) $(GFLAGS)'. The rules for SCCS are terminal (see section Match-Anything Pattern Rules), so SCCS files cannot be generated from another source; they must actually exist. For the benefit of SCCS, a file n' is copied from n.sh' and made executable (by everyone). This is for shell scripts that are checked into SCCS. Since RCS preserves the execution permission of a file, you do not need to use this feature with RCS. We recommend that you avoid using of SCCS. RCS is widely held to be superior, and is also free. By choosing free software in place of comparable (or inferior) proprietary software, you support the free software movement. Usually, you want to change only the variables listed in the table above, which are documented in the following section. However, the commands in built-in implicit rules actually use variables such as COMPILE.c, LINK.p, and PREPROCESS.S, whose values contain the commands listed above. make follows the convention that the rule to compile a .x' source file uses the variable COMPILE.x. Similarly, the rule to produce an executable from a .x' file uses LINK.x; and the rule to preprocess a .x' file uses PREPROCESS.x. Every rule that produces an object file uses the variable OUTPUT_OPTION. make defines this variable either to contain -o$@', or to be empty, depending on a compile-time option. You need the -o' option to ensure that the output goes into the right file when the source file is in a different directory, as when using VPATH (see section Searching Directories for Dependencies). However, compilers on some systems do not accept a -o' switch for object files. If you use such a system, and use VPATH, some compilations will put their output in the wrong place. A possible workaround for this problem is to give OUTPUT_OPTION the value ; mv $*.o$@'.

## Variables Used by Implicit Rules

The commands in built-in implicit rules make liberal use of certain predefined variables. You can alter these variables in the makefile, with arguments to make, or in the environment to alter how the implicit rules work without redefining the rules themselves.

For example, the command used to compile a C source file actually says $(CC) -c$(CFLAGS) $(CPPFLAGS)'. The default values of the variables used are cc' and nothing, resulting in the command cc -c'. By redefining CC' to ncc', you could cause ncc' to be used for all C compilations performed by the implicit rule. By redefining CFLAGS' to be -g', you could pass the -g' option to each compilation. All implicit rules that do C compilation use $(CC)' to get the program name for the compiler and all include $(CFLAGS)' among the arguments given to the compiler. The variables used in implicit rules fall into two classes: those that are names of programs (like CC) and those that contain arguments for the programs (like CFLAGS). (The "name of a program" may also contain some command arguments, but it must start with an actual executable program name.) If a variable value contains more than one argument, separate them with spaces. Here is a table of variables used as names of programs in built-in rules: AR Archive-maintaining program; default ar'. AS Program for doing assembly; default as'. CC Program for compiling C programs; default cc'. CXX Program for compiling C++ programs; default g++'. CO Program for extracting a file from RCS; default co'. CPP Program for running the C preprocessor, with results to standard output; default $(CC) -E'.
FC
Program for compiling or preprocessing Fortran and Ratfor programs; default f77'.
GET
Program for extracting a file from SCCS; default get'.
LEX
Program to use to turn Lex grammars into C programs or Ratfor programs; default lex'.
PC
Program for compiling Pascal programs; default pc'.
YACC
Program to use to turn Yacc grammars into C programs; default yacc'.
YACCR
Program to use to turn Yacc grammars into Ratfor programs; default yacc -r'.
MAKEINFO
Program to convert a Texinfo source file into an Info file; default makeinfo'.
TEX
Program to make TeX DVI files from TeX source; default tex'.
TEXI2DVI
Program to make TeX DVI files from Texinfo source; default texi2dvi'.
WEAVE
Program to translate Web into TeX; default weave'.
CWEAVE
Program to translate C Web into TeX; default cweave'.
TANGLE
Program to translate Web into Pascal; default tangle'.
CTANGLE
Program to translate C Web into C; default ctangle'.
RM
Command to remove a file; default rm -f'.

Here is a table of variables whose values are additional arguments for the programs above. The default values for all of these is the empty string, unless otherwise noted.

ARFLAGS
Flags to give the archive-maintaining program; default rv'.
ASFLAGS
Extra flags to give to the assembler (when explicitly invoked on a .s' or .S' file).
CFLAGS
Extra flags to give to the C compiler.
CXXFLAGS
Extra flags to give to the C++ compiler.
COFLAGS
Extra flags to give to the RCS co program.
CPPFLAGS
Extra flags to give to the C preprocessor and programs that use it (the C and Fortran compilers).
FFLAGS
Extra flags to give to the Fortran compiler.
GFLAGS
Extra flags to give to the SCCS get program.
LDFLAGS
Extra flags to give to compilers when they are supposed to invoke the linker, ld'.
LFLAGS
Extra flags to give to Lex.
PFLAGS
Extra flags to give to the Pascal compiler.
RFLAGS
Extra flags to give to the Fortran compiler for Ratfor programs.
YFLAGS
Extra flags to give to Yacc.

## Chains of Implicit Rules

Sometimes a file can be made by a sequence of implicit rules. For example, a file n.o' could be made from n.y' by running first Yacc and then cc. Such a sequence is called a chain.

If the file n.c' exists, or is mentioned in the makefile, no special searching is required: make finds that the object file can be made by C compilation from n.c'; later on, when considering how to make n.c', the rule for running Yacc is used. Ultimately both n.c' and n.o' are updated.

However, even if n.c' does not exist and is not mentioned, make knows how to envision it as the missing link between n.o' and n.y'! In this case, n.c' is called an intermediate file. Once make has decided to use the intermediate file, it is entered in the data base as if it had been mentioned in the makefile, along with the implicit rule that says how to create it.

Intermediate files are remade using their rules just like all other files. But intermediate files are treated differently in two ways.

The first difference is what happens if the intermediate file does not exist. If an ordinary file b does not exist, and make considers a target that depends on b, it invariably creates b and then updates the target from b. But if b is an intermediate file, then make can leave well enough alone. It won't bother updating b, or the ultimate target, unless some dependency of b is newer than that target or there is some other reason to update that target.

The second difference is that if make does create b in order to update something else, it deletes b later on after it is no longer needed. Therefore, an intermediate file which did not exist before make also does not exist after make. make reports the deletion to you by printing a rm -f' command showing which file it is deleting.

Ordinarily, a file cannot be intermediate if it is mentioned in the makefile as a target or dependency. However, you can explicitly mark a file as intermediate by listing it as a dependency of the special target .INTERMEDIATE. This takes effect even if the file is mentioned explicitly in some other way.

You can prevent automatic deletion of an intermediate file by marking it as a secondary file. To do this, list it as a dependency of the special target .SECONDARY. When a file is secondary, make will not create the file merely because it does not already exist, but make does not automatically delete the file. Marking a file as secondary also marks it as intermediate.

You can list the target pattern of an implicit rule (such as %.o') as a dependency of the special target .PRECIOUS to preserve intermediate files made by implicit rules whose target patterns match that file's name; see section Interrupting or Killing make.

A chain can involve more than two implicit rules. For example, it is possible to make a file foo' from RCS/foo.y,v' by running RCS, Yacc and cc. Then both foo.y' and foo.c' are intermediate files that are deleted at the end.

No single implicit rule can appear more than once in a chain. This means that make will not even consider such a ridiculous thing as making foo' from foo.o.o' by running the linker twice. This constraint has the added benefit of preventing any infinite loop in the search for an implicit rule chain.

There are some special implicit rules to optimize certain cases that would otherwise be handled by rule chains. For example, making foo' from foo.c' could be handled by compiling and linking with separate chained rules, using foo.o' as an intermediate file. But what actually happens is that a special rule for this case does the compilation and linking with a single cc command. The optimized rule is used in preference to the step-by-step chain because it comes earlier in the ordering of rules.

## Defining and Redefining Pattern Rules

You define an implicit rule by writing a pattern rule. A pattern rule looks like an ordinary rule, except that its target contains the character %' (exactly one of them). The target is considered a pattern for matching file names; the %' can match any nonempty substring, while other characters match only themselves. The dependencies likewise use %' to show how their names relate to the target name.

Thus, a pattern rule %.o : %.c' says how to make any file stem.o' from another file stem.c'.

Note that expansion using %' in pattern rules occurs after any variable or function expansions, which take place when the makefile is read. See section How to Use Variables, and section Functions for Transforming Text.

### Introduction to Pattern Rules

A pattern rule contains the character %' (exactly one of them) in the target; otherwise, it looks exactly like an ordinary rule. The target is a pattern for matching file names; the %' matches any nonempty substring, while other characters match only themselves.

For example, %.c' as a pattern matches any file name that ends in .c'. s.%.c' as a pattern matches any file name that starts with s.', ends in .c' and is at least five characters long. (There must be at least one character to match the %'.) The substring that the %' matches is called the stem.

%' in a dependency of a pattern rule stands for the same stem that was matched by the %' in the target. In order for the pattern rule to apply, its target pattern must match the file name under consideration, and its dependency patterns must name files that exist or can be made. These files become dependencies of the target.

Thus, a rule of the form

%.o : %.c ; command...


specifies how to make a file n.o', with another file n.c' as its dependency, provided that n.c' exists or can be made.

There may also be dependencies that do not use %'; such a dependency attaches to every file made by this pattern rule. These unvarying dependencies are useful occasionally.

A pattern rule need not have any dependencies that contain %', or in fact any dependencies at all. Such a rule is effectively a general wildcard. It provides a way to make any file that matches the target pattern. See section Defining Last-Resort Default Rules.

Pattern rules may have more than one target. Unlike normal rules, this does not act as many different rules with the same dependencies and commands. If a pattern rule has multiple targets, make knows that the rule's commands are responsible for making all of the targets. The commands are executed only once to make all the targets. When searching for a pattern rule to match a target, the target patterns of a rule other than the one that matches the target in need of a rule are incidental: make worries only about giving commands and dependencies to the file presently in question. However, when this file's commands are run, the other targets are marked as having been updated themselves.

The order in which pattern rules appear in the makefile is important since this is the order in which they are considered. Of equally applicable rules, only the first one found is used. The rules you write take precedence over those that are built in. Note however, that a rule whose dependencies actually exist or are mentioned always takes priority over a rule with dependencies that must be made by chaining other implicit rules.

### Pattern Rule Examples

Here are some examples of pattern rules actually predefined in make. First, the rule that compiles .c' files into .o' files:

%.o : %.c
$(CC) -c$(CFLAGS) $(CPPFLAGS)$< -o $@  defines a rule that can make any file x.o' from x.c'. The command uses the automatic variables $@' and $<' to substitute the names of the target file and the source file in each case where the rule applies (see section Automatic Variables). Here is a second built-in rule: % :: RCS/%,v$(CO) $(COFLAGS)$<


defines a rule that can make any file x' whatsoever from a corresponding file x,v' in the subdirectory RCS'. Since the target is %', this rule will apply to any file whatever, provided the appropriate dependency file exists. The double colon makes the rule terminal, which means that its dependency may not be an intermediate file (see section Match-Anything Pattern Rules).

This pattern rule has two targets:

%.tab.c %.tab.h: %.y
bison -d $<  This tells make that the command bison -d x.y' will make both x.tab.c' and x.tab.h'. If the file foo' depends on the files parse.tab.o' and scan.o' and the file scan.o' depends on the file parse.tab.h', when parse.y' is changed, the command bison -d parse.y' will be executed only once, and the dependencies of both parse.tab.o' and scan.o' will be satisfied. (Presumably the file parse.tab.o' will be recompiled from parse.tab.c' and the file scan.o' from scan.c', while foo' is linked from parse.tab.o', scan.o', and its other dependencies, and it will execute happily ever after.) ### Automatic Variables Suppose you are writing a pattern rule to compile a .c' file into a .o' file: how do you write the cc' command so that it operates on the right source file name? You cannot write the name in the command, because the name is different each time the implicit rule is applied. What you do is use a special feature of make, the automatic variables. These variables have values computed afresh for each rule that is executed, based on the target and dependencies of the rule. In this example, you would use $@' for the object file name and $<' for the source file name. Here is a table of automatic variables: $@
The file name of the target of the rule. If the target is an archive member, then $@' is the name of the archive file. In a pattern rule that has multiple targets (see section Introduction to Pattern Rules), $@' is the name of whichever target caused the rule's commands to be run.
$% The target member name, when the target is an archive member. See section Using make to Update Archive Files. For example, if the target is foo.a(bar.o)' then $%' is bar.o' and $@' is foo.a'. $%' is empty when the target is not an archive member.
$< The name of the first dependency. If the target got its commands from an implicit rule, this will be the first dependency added by the implicit rule (see section Using Implicit Rules). $?
The names of all the dependencies that are newer than the target, with spaces between them. For dependencies which are archive members, only the member named is used (see section Using make to Update Archive Files).
$^ The names of all the dependencies, with spaces between them. For dependencies which are archive members, only the member named is used (see section Using make to Update Archive Files). A target has only one dependency on each other file it depends on, no matter how many times each file is listed as a dependency. So if you list a dependency more than once for a target, the value of $^ contains just one copy of the name.
$+ This is like $^', but dependencies listed more than once are duplicated in the order they were listed in the makefile. This is primarily useful for use in linking commands where it is meaningful to repeat library file names in a particular order.
$* The stem with which an implicit rule matches (see section How Patterns Match). If the target is dir/a.foo.b' and the target pattern is a.%.b' then the stem is dir/foo'. The stem is useful for constructing names of related files. In a static pattern rule, the stem is part of the file name that matched the %' in the target pattern. In an explicit rule, there is no stem; so $*' cannot be determined in that way. Instead, if the target name ends with a recognized suffix (see section Old-Fashioned Suffix Rules), $*' is set to the target name minus the suffix. For example, if the target name is foo.c', then $*' is set to foo', since .c' is a suffix. GNU make does this bizarre thing only for compatibility with other implementations of make. You should generally avoid using $*' except in implicit rules or static pattern rules. If the target name in an explicit rule does not end with a recognized suffix, $*' is set to the empty string for that rule.

$?' is useful even in explicit rules when you wish to operate on only the dependencies that have changed. For example, suppose that an archive named lib' is supposed to contain copies of several object files. This rule copies just the changed object files into the archive: lib: foo.o bar.o lose.o win.o ar r lib$?


Of the variables listed above, four have values that are single file names, and two have values that are lists of file names. These six have variants that get just the file's directory name or just the file name within the directory. The variant variables' names are formed by appending D' or F', respectively. These variants are semi-obsolete in GNU make since the functions dir and notdir can be used to get a similar effect (see section Functions for File Names). Note, however, that the F' variants all omit the trailing slash which always appears in the output of the dir function. Here is a table of the variants:

$(@D)' The directory part of the file name of the target, with the trailing slash removed. If the value of $@' is dir/foo.o' then $(@D)' is dir'. This value is .' if $@' does not contain a slash.
$(@F)' The file-within-directory part of the file name of the target. If the value of $@' is dir/foo.o' then $(@F)' is foo.o'. $(@F)' is equivalent to $(notdir$@)'.
$(*D)' $(*F)'
The directory part and the file-within-directory part of the stem; dir' and foo' in this example.
$(%D)' $(%F)'
The directory part and the file-within-directory part of the target archive member name. This makes sense only for archive member targets of the form archive(member)' and is useful only when member may contain a directory name. (See section Archive Members as Targets.)
$(<D)' $(<F)'
The directory part and the file-within-directory part of the first dependency.
$(^D)' $(^F)'
Lists of the directory parts and the file-within-directory parts of all dependencies.
$(?D)' $(?F)'
Lists of the directory parts and the file-within-directory parts of all dependencies that are newer than the target.

Note that we use a special stylistic convention when we talk about these automatic variables; we write "the value of $<'", rather than "the variable <" as we would write for ordinary variables such as objects and CFLAGS. We think this convention looks more natural in this special case. Please do not assume it has a deep significance; $<' refers to the variable named < just as $(CFLAGS)' refers to the variable named CFLAGS. You could just as well use $(<)' in place of $<'. ### How Patterns Match A target pattern is composed of a %' between a prefix and a suffix, either or both of which may be empty. The pattern matches a file name only if the file name starts with the prefix and ends with the suffix, without overlap. The text between the prefix and the suffix is called the stem. Thus, when the pattern %.o' matches the file name test.o', the stem is test'. The pattern rule dependencies are turned into actual file names by substituting the stem for the character %'. Thus, if in the same example one of the dependencies is written as %.c', it expands to test.c'. When the target pattern does not contain a slash (and it usually does not), directory names in the file names are removed from the file name before it is compared with the target prefix and suffix. After the comparison of the file name to the target pattern, the directory names, along with the slash that ends them, are added on to the dependency file names generated from the pattern rule's dependency patterns and the file name. The directories are ignored only for the purpose of finding an implicit rule to use, not in the application of that rule. Thus, e%t' matches the file name src/eat', with src/a' as the stem. When dependencies are turned into file names, the directories from the stem are added at the front, while the rest of the stem is substituted for the %'. The stem src/a' with a dependency pattern c%r' gives the file name src/car'. ### Match-Anything Pattern Rules When a pattern rule's target is just %', it matches any file name whatever. We call these rules match-anything rules. They are very useful, but it can take a lot of time for make to think about them, because it must consider every such rule for each file name listed either as a target or as a dependency. Suppose the makefile mentions foo.c'. For this target, make would have to consider making it by linking an object file foo.c.o', or by C compilation-and-linking in one step from foo.c.c', or by Pascal compilation-and-linking from foo.c.p', and many other possibilities. We know these possibilities are ridiculous since foo.c' is a C source file, not an executable. If make did consider these possibilities, it would ultimately reject them, because files such as foo.c.o' and foo.c.p' would not exist. But these possibilities are so numerous that make would run very slowly if it had to consider them. To gain speed, we have put various constraints on the way make considers match-anything rules. There are two different constraints that can be applied, and each time you define a match-anything rule you must choose one or the other for that rule. One choice is to mark the match-anything rule as terminal by defining it with a double colon. When a rule is terminal, it does not apply unless its dependencies actually exist. Dependencies that could be made with other implicit rules are not good enough. In other words, no further chaining is allowed beyond a terminal rule. For example, the built-in implicit rules for extracting sources from RCS and SCCS files are terminal; as a result, if the file foo.c,v' does not exist, make will not even consider trying to make it as an intermediate file from foo.c,v.o' or from RCS/SCCS/s.foo.c,v'. RCS and SCCS files are generally ultimate source files, which should not be remade from any other files; therefore, make can save time by not looking for ways to remake them. If you do not mark the match-anything rule as terminal, then it is nonterminal. A nonterminal match-anything rule cannot apply to a file name that indicates a specific type of data. A file name indicates a specific type of data if some non-match-anything implicit rule target matches it. For example, the file name foo.c' matches the target for the pattern rule %.c : %.y' (the rule to run Yacc). Regardless of whether this rule is actually applicable (which happens only if there is a file foo.y'), the fact that its target matches is enough to prevent consideration of any nonterminal match-anything rules for the file foo.c'. Thus, make will not even consider trying to make foo.c' as an executable file from foo.c.o', foo.c.c', foo.c.p', etc. The motivation for this constraint is that nonterminal match-anything rules are used for making files containing specific types of data (such as executable files) and a file name with a recognized suffix indicates some other specific type of data (such as a C source file). Special built-in dummy pattern rules are provided solely to recognize certain file names so that nonterminal match-anything rules will not be considered. These dummy rules have no dependencies and no commands, and they are ignored for all other purposes. For example, the built-in implicit rule %.p :  exists to make sure that Pascal source files such as foo.p' match a specific target pattern and thereby prevent time from being wasted looking for foo.p.o' or foo.p.c'. Dummy pattern rules such as the one for %.p' are made for every suffix listed as valid for use in suffix rules (see section Old-Fashioned Suffix Rules). ### Canceling Implicit Rules You can override a built-in implicit rule (or one you have defined yourself) by defining a new pattern rule with the same target and dependencies, but different commands. When the new rule is defined, the built-in one is replaced. The new rule's position in the sequence of implicit rules is determined by where you write the new rule. You can cancel a built-in implicit rule by defining a pattern rule with the same target and dependencies, but no commands. For example, the following would cancel the rule that runs the assembler: %.o : %.s  ## Defining Last-Resort Default Rules You can define a last-resort implicit rule by writing a terminal match-anything pattern rule with no dependencies (see section Match-Anything Pattern Rules). This is just like any other pattern rule; the only thing special about it is that it will match any target. So such a rule's commands are used for all targets and dependencies that have no commands of their own and for which no other implicit rule applies. For example, when testing a makefile, you might not care if the source files contain real data, only that they exist. Then you might do this: %:: touch$@


to cause all the source files needed (as dependencies) to be created automatically.

You can instead define commands to be used for targets for which there are no rules at all, even ones which don't specify commands. You do this by writing a rule for the target .DEFAULT. Such a rule's commands are used for all dependencies which do not appear as targets in any explicit rule, and for which no implicit rule applies. Naturally, there is no .DEFAULT rule unless you write one.

If you use .DEFAULT with no commands or dependencies:

.DEFAULT:


the commands previously stored for .DEFAULT are cleared. Then make acts as if you had never defined .DEFAULT at all.

If you do not want a target to get the commands from a match-anything pattern rule or .DEFAULT, but you also do not want any commands to be run for the target, you can give it empty commands (see section Using Empty Commands).

You can use a last-resort rule to override part of another makefile. See section Overriding Part of Another Makefile.

## Old-Fashioned Suffix Rules

Suffix rules are the old-fashioned way of defining implicit rules for make. Suffix rules are obsolete because pattern rules are more general and clearer. They are supported in GNU make for compatibility with old makefiles. They come in two kinds: double-suffix and single-suffix.

A double-suffix rule is defined by a pair of suffixes: the target suffix and the source suffix. It matches any file whose name ends with the target suffix. The corresponding implicit dependency is made by replacing the target suffix with the source suffix in the file name. A two-suffix rule whose target and source suffixes are .o' and .c' is equivalent to the pattern rule %.o : %.c'.

A single-suffix rule is defined by a single suffix, which is the source suffix. It matches any file name, and the corresponding implicit dependency name is made by appending the source suffix. A single-suffix rule whose source suffix is .c' is equivalent to the pattern rule % : %.c'.

Suffix rule definitions are recognized by comparing each rule's target against a defined list of known suffixes. When make sees a rule whose target is a known suffix, this rule is considered a single-suffix rule. When make sees a rule whose target is two known suffixes concatenated, this rule is taken as a double-suffix rule.

For example, .c' and .o' are both on the default list of known suffixes. Therefore, if you define a rule whose target is .c.o', make takes it to be a double-suffix rule with source suffix .c' and target suffix .o'. Here is the old-fashioned way to define the rule for compiling a C source file:

.c.o:
$(CC) -c$(CFLAGS) $(CPPFLAGS) -o$@ $<  Suffix rules cannot have any dependencies of their own. If they have any, they are treated as normal files with funny names, not as suffix rules. Thus, the rule: .c.o: foo.h$(CC) -c $(CFLAGS)$(CPPFLAGS) -o $@$<


tells how to make the file .c.o' from the dependency file foo.h', and is not at all like the pattern rule:

%.o: %.c foo.h
$(CC) -c$(CFLAGS) $(CPPFLAGS) -o$@ $<  which tells how to make .o' files from .c' files, and makes all .o' files using this pattern rule also depend on foo.h'. Suffix rules with no commands are also meaningless. They do not remove previous rules as do pattern rules with no commands (see section Canceling Implicit Rules). They simply enter the suffix or pair of suffixes concatenated as a target in the data base. The known suffixes are simply the names of the dependencies of the special target .SUFFIXES. You can add your own suffixes by writing a rule for .SUFFIXES that adds more dependencies, as in: .SUFFIXES: .hack .win  which adds .hack' and .win' to the end of the list of suffixes. If you wish to eliminate the default known suffixes instead of just adding to them, write a rule for .SUFFIXES with no dependencies. By special dispensation, this eliminates all existing dependencies of .SUFFIXES. You can then write another rule to add the suffixes you want. For example, .SUFFIXES: # Delete the default suffixes .SUFFIXES: .c .o .h # Define our suffix list  The -r' or --no-builtin-rules' flag causes the default list of suffixes to be empty. The variable SUFFIXES is defined to the default list of suffixes before make reads any makefiles. You can change the list of suffixes with a rule for the special target .SUFFIXES, but that does not alter this variable. ## Implicit Rule Search Algorithm Here is the procedure make uses for searching for an implicit rule for a target t. This procedure is followed for each double-colon rule with no commands, for each target of ordinary rules none of which have commands, and for each dependency that is not the target of any rule. It is also followed recursively for dependencies that come from implicit rules, in the search for a chain of rules. Suffix rules are not mentioned in this algorithm because suffix rules are converted to equivalent pattern rules once the makefiles have been read in. For an archive member target of the form archive(member)', the following algorithm is run twice, first using the entire target name t, and second using (member)' as the target t if the first run found no rule. 1. Split t into a directory part, called d, and the rest, called n. For example, if t is src/foo.o', then d is src/' and n is foo.o'. 2. Make a list of all the pattern rules one of whose targets matches t or n. If the target pattern contains a slash, it is matched against t; otherwise, against n. 3. If any rule in that list is not a match-anything rule, then remove all nonterminal match-anything rules from the list. 4. Remove from the list all rules with no commands. 5. For each pattern rule in the list: 1. Find the stem s, which is the nonempty part of t or n matched by the %' in the target pattern. 2. Compute the dependency names by substituting s for %'; if the target pattern does not contain a slash, append d to the front of each dependency name. 3. Test whether all the dependencies exist or ought to exist. (If a file name is mentioned in the makefile as a target or as an explicit dependency, then we say it ought to exist.) If all dependencies exist or ought to exist, or there are no dependencies, then this rule applies. 6. If no pattern rule has been found so far, try harder. For each pattern rule in the list: 1. If the rule is terminal, ignore it and go on to the next rule. 2. Compute the dependency names as before. 3. Test whether all the dependencies exist or ought to exist. 4. For each dependency that does not exist, follow this algorithm recursively to see if the dependency can be made by an implicit rule. 5. If all dependencies exist, ought to exist, or can be made by implicit rules, then this rule applies. 7. If no implicit rule applies, the rule for .DEFAULT, if any, applies. In that case, give t the same commands that .DEFAULT has. Otherwise, there are no commands for t. Once a rule that applies has been found, for each target pattern of the rule other than the one that matched t or n, the %' in the pattern is replaced with s and the resultant file name is stored until the commands to remake the target file t are executed. After these commands are executed, each of these stored file names are entered into the data base and marked as having been updated and having the same update status as the file t. When the commands of a pattern rule are executed for t, the automatic variables are set corresponding to the target and dependencies. See section Automatic Variables. # Using make to Update Archive Files Archive files are files containing named subfiles called members; they are maintained with the program ar and their main use is as subroutine libraries for linking. ## Archive Members as Targets An individual member of an archive file can be used as a target or dependency in make. You specify the member named member in archive file archive as follows: archive(member)  This construct is available only in targets and dependencies, not in commands! Most programs that you might use in commands do not support this syntax and cannot act directly on archive members. Only ar and other programs specifically designed to operate on archives can do so. Therefore, valid commands to update an archive member target probably must use ar. For example, this rule says to create a member hack.o' in archive foolib' by copying the file hack.o': foolib(hack.o) : hack.o ar cr foolib hack.o  In fact, nearly all archive member targets are updated in just this way and there is an implicit rule to do it for you. Note: The c' flag to ar is required if the archive file does not already exist. To specify several members in the same archive, you can write all the member names together between the parentheses. For example: foolib(hack.o kludge.o)  is equivalent to: foolib(hack.o) foolib(kludge.o)  You can also use shell-style wildcards in an archive member reference. See section Using Wildcard Characters in File Names. For example, foolib(*.o)' expands to all existing members of the foolib' archive whose names end in .o'; perhaps foolib(hack.o) foolib(kludge.o)'. ## Implicit Rule for Archive Member Targets Recall that a target that looks like a(m)' stands for the member named m in the archive file a. When make looks for an implicit rule for such a target, as a special feature it considers implicit rules that match (m)', as well as those that match the actual target a(m)'. This causes one special rule whose target is (%)' to match. This rule updates the target a(m)' by copying the file m into the archive. For example, it will update the archive member target foo.a(bar.o)' by copying the file bar.o' into the archive foo.a' as a member named bar.o'. When this rule is chained with others, the result is very powerful. Thus, make "foo.a(bar.o)"' (the quotes are needed to protect the (' and )' from being interpreted specially by the shell) in the presence of a file bar.c' is enough to cause the following commands to be run, even without a makefile: cc -c bar.c -o bar.o ar r foo.a bar.o rm -f bar.o  Here make has envisioned the file bar.o' as an intermediate file. See section Chains of Implicit Rules. Implicit rules such as this one are written using the automatic variable $%'. See section Automatic Variables.

An archive member name in an archive cannot contain a directory name, but it may be useful in a makefile to pretend that it does. If you write an archive member target foo.a(dir/file.o)', make will perform automatic updating with this command:

ar r foo.a dir/file.o


which has the effect of copying the file dir/file.o' into a member named file.o'. In connection with such usage, the automatic variables %D and %F may be useful.

### Updating Archive Symbol Directories

An archive file that is used as a library usually contains a special member named __.SYMDEF' that contains a directory of the external symbol names defined by all the other members. After you update any other members, you need to update __.SYMDEF' so that it will summarize the other members properly. This is done by running the ranlib program:

ranlib archivefile


Normally you would put this command in the rule for the archive file, and make all the members of the archive file dependencies of that rule. For example,

libfoo.a: libfoo.a(x.o) libfoo.a(y.o) ...
ranlib libfoo.a


The effect of this is to update archive members x.o', y.o', etc., and then update the symbol directory member __.SYMDEF' by running ranlib. The rules for updating the members are not shown here; most likely you can omit them and use the implicit rule which copies files into the archive, as described in the preceding section.

This is not necessary when using the GNU ar program, which updates the __.SYMDEF' member automatically.

## Dangers When Using Archives

It is important to be careful when using parallel execution (the -j switch; see section Parallel Execution) and archives. If multiple ar commands run at the same time on the same archive file, they will not know about each other and can corrupt the file.

Possibly a future version of make will provide a mechanism to circumvent this problem by serializing all commands that operate on the same archive file. But for the time being, you must either write your makefiles to avoid this problem in some other way, or not use -j.

## Suffix Rules for Archive Files

You can write a special kind of suffix rule for dealing with archive files. See section Old-Fashioned Suffix Rules, for a full explanation of suffix rules. Archive suffix rules are obsolete in GNU make, because pattern rules for archives are a more general mechanism (see section Implicit Rule for Archive Member Targets). But they are retained for compatibility with other makes.

To write a suffix rule for archives, you simply write a suffix rule using the target suffix .a' (the usual suffix for archive files). For example, here is the old-fashioned suffix rule to update a library archive from C source files:

.c.a:
$(CC)$(CFLAGS) $(CPPFLAGS) -c$< -o $*.o$(AR) r $@$*.o
$(RM)$*.o


This works just as if you had written the pattern rule:

(%.o): %.c
$(CC)$(CFLAGS) $(CPPFLAGS) -c$< -o $*.o$(AR) r $@$*.o
$(RM)$*.o


In fact, this is just what make does when it sees a suffix rule with .a' as the target suffix. Any double-suffix rule .x.a' is converted to a pattern rule with the target pattern (%.o)' and a dependency pattern of %.x'.

Since you might want to use .a' as the suffix for some other kind of file, make also converts archive suffix rules to pattern rules in the normal way (see section Old-Fashioned Suffix Rules). Thus a double-suffix rule .x.a' produces two pattern rules: (%.o): %.x' and %.a: %.x'.

# Features of GNU make

Here is a summary of the features of GNU make, for comparison with and credit to other versions of make. We consider the features of make in 4.2 BSD systems as a baseline. If you are concerned with writing portable makefiles, you should use only the features of make not listed here or in section Incompatibilities and Missing Features.

Many features come from the version of make in System V.

• The VPATH variable and its special meaning. See section Searching Directories for Dependencies. This feature exists in System V make, but is undocumented. It is documented in 4.3 BSD make (which says it mimics System V's VPATH feature).
• Included makefiles. See section Including Other Makefiles. Allowing multiple files to be included with a single directive is a GNU extension.
• Variables are read from and communicated via the environment. See section Variables from the Environment.
• Options passed through the variable MAKEFLAGS to recursive invocations of make. See section Communicating Options to a Sub-make.
• The automatic variable $% is set to the member name in an archive reference. See section Automatic Variables. • The automatic variables $@, $*, $<, $%, and $? have corresponding forms like $(@F) and $(@D). We have generalized this to $^ as an obvious extension. See section Automatic Variables. • Substitution variable references. See section Basics of Variable References. • The command-line options -b' and -m', accepted and ignored. In System V make, these options actually do something. • Execution of recursive commands to run make via the variable MAKE even if -n', -q' or -t' is specified. See section Recursive Use of make. • Support for suffix .a' in suffix rules. See section Suffix Rules for Archive Files. This feature is obsolete in GNU make, because the general feature of rule chaining (see section Chains of Implicit Rules) allows one pattern rule for installing members in an archive (see section Implicit Rule for Archive Member Targets) to be sufficient. • The arrangement of lines and backslash-newline combinations in commands is retained when the commands are printed, so they appear as they do in the makefile, except for the stripping of initial whitespace. The following features were inspired by various other versions of make. In some cases it is unclear exactly which versions inspired which others. • Pattern rules using %'. This has been implemented in several versions of make. We're not sure who invented it first, but it's been spread around a bit. See section Defining and Redefining Pattern Rules. • Rule chaining and implicit intermediate files. This was implemented by Stu Feldman in his version of make for AT&T Eighth Edition Research Unix, and later by Andrew Hume of AT&T Bell Labs in his mk program (where he terms it "transitive closure"). We do not really know if we got this from either of them or thought it up ourselves at the same time. See section Chains of Implicit Rules. • The automatic variable $^ containing a list of all dependencies of the current target. We did not invent this, but we have no idea who did. See section Automatic Variables. The automatic variable $+ is a simple extension of $^.
• The "what if" flag (-W' in GNU make) was (as far as we know) invented by Andrew Hume in mk. See section Instead of Executing the Commands.
• The concept of doing several things at once (parallelism) exists in many incarnations of make and similar programs, though not in the System V or BSD implementations. See section Command Execution.
• Modified variable references using pattern substitution come from SunOS 4. See section Basics of Variable References. This functionality was provided in GNU make by the patsubst function before the alternate syntax was implemented for compatibility with SunOS 4. It is not altogether clear who inspired whom, since GNU make had patsubst before SunOS 4 was released.
• The special significance of +' characters preceding command lines (see section Instead of Executing the Commands) is mandated by IEEE Standard 1003.2-1992 (POSIX.2).
• The +=' syntax to append to the value of a variable comes from SunOS 4 make. See section Appending More Text to Variables.
• The syntax archive(mem1 mem2...)' to list multiple members in a single archive file comes from SunOS 4 make. See section Archive Members as Targets.
• The -include directive to include makefiles with no error for a nonexistent file comes from SunOS 4 make. (But note that SunOS 4 make does not allow multiple makefiles to be specified in one -include directive.) The same feature appears with the name sinclude in SGI make and perhaps others.

The remaining features are inventions new in GNU make:

• Use the -v' or --version' option to print version and copyright information.
• Use the -h' or --help' option to summarize the options to make.
• Simply-expanded variables. See section The Two Flavors of Variables.
• Pass command-line variable assignments automatically through the variable MAKE to recursive make invocations. See section Recursive Use of make.
• Use the -C' or --directory' command option to change directory. See section Summary of Options.
• Make verbatim variable definitions with define. See section Defining Variables Verbatim.
• Declare phony targets with the special target .PHONY. Andrew Hume of AT&T Bell Labs implemented a similar feature with a different syntax in his mk program. This seems to be a case of parallel discovery. See section Phony Targets.
• Manipulate text by calling functions. See section Functions for Transforming Text.
• Use the -o' or --old-file' option to pretend a file's modification-time is old. See section Avoiding Recompilation of Some Files.
• Conditional execution. This feature has been implemented numerous times in various versions of make; it seems a natural extension derived from the features of the C preprocessor and similar macro languages and is not a revolutionary concept. See section Conditional Parts of Makefiles.
• Specify a search path for included makefiles. See section Including Other Makefiles.
• Specify extra makefiles to read with an environment variable. See section The Variable MAKEFILES.
• Strip leading sequences of ./' from file names, so that ./file' and file' are considered to be the same file.
• Use a special search method for library dependencies written in the form -lname'. See section Directory Search for Link Libraries.
• Allow suffixes for suffix rules (see section Old-Fashioned Suffix Rules) to contain any characters. In other versions of make, they must begin with .' and not contain any /' characters.
• Keep track of the current level of make recursion using the variable MAKELEVEL. See section Recursive Use of make.
• Provide any goals given on the command line in the variable MAKECMDGOALS. See section Arguments to Specify the Goals.
• Specify static pattern rules. See section Static Pattern Rules.
• Provide selective vpath search. See section Searching Directories for Dependencies.
• Provide computed variable references. See section Basics of Variable References.
• Update makefiles. See section How Makefiles Are Remade. System V make has a very, very limited form of this functionality in that it will check out SCCS files for makefiles.
• Various new built-in implicit rules. See section Catalogue of Implicit Rules.
• The built-in variable MAKE_VERSION' gives the version number of make.

# Incompatibilities and Missing Features

The make programs in various other systems support a few features that are not implemented in GNU make. The POSIX.2 standard (IEEE Standard 1003.2-1992) which specifies make does not require any of these features.

• A target of the form file((entry))' stands for a member of archive file file. The member is chosen, not by name, but by being an object file which defines the linker symbol entry. This feature was not put into GNU make because of the nonmodularity of putting knowledge into make of the internal format of archive file symbol tables. See section Updating Archive Symbol Directories.
• Suffixes (used in suffix rules) that end with the character ~' have a special meaning to System V make; they refer to the SCCS file that corresponds to the file one would get without the ~'. For example, the suffix rule .c~.o' would make the file n.o' from the SCCS file s.n.c'. For complete coverage, a whole series of such suffix rules is required. See section Old-Fashioned Suffix Rules. In GNU make, this entire series of cases is handled by two pattern rules for extraction from SCCS, in combination with the general feature of rule chaining. See section Chains of Implicit Rules.
• In System V make, the string $$@' has the strange meaning that, in the dependencies of a rule with multiple targets, it stands for the particular target that is being processed. This is not defined in GNU make because $$' should always stand for an ordinary $'. It is possible to get this functionality through the use of static pattern rules (see section Static Pattern Rules). The System V make rule: $(targets): $$@.o lib.a  can be replaced with the GNU make static pattern rule: (targets): %: %.o lib.a  • In System V and 4.3 BSD make, files found by VPATH search (see section Searching Directories for Dependencies) have their names changed inside command strings. We feel it is much cleaner to always use automatic variables and thus make this feature obsolete. • In some Unix makes, the automatic variable * appearing in the dependencies of a rule has the amazingly strange "feature" of expanding to the full name of the target of that rule. We cannot imagine what went on in the minds of Unix make developers to do this; it is utterly inconsistent with the normal definition of *. • In some Unix makes, implicit rule search (see section Using Implicit Rules) is apparently done for all targets, not just those without commands. This means you can do: foo.o: cc -c foo.c  and Unix make will intuit that foo.o' depends on foo.c'. We feel that such usage is broken. The dependency properties of make are well-defined (for GNU make, at least), and doing such a thing simply does not fit the model. • GNU make does not include any built-in implicit rules for compiling or preprocessing EFL programs. If we hear of anyone who is using EFL, we will gladly add them. • It appears that in SVR4 make, a suffix rule can be specified with no commands, and it is treated as if it had empty commands (see section Using Empty Commands). For example: .c.a:  will override the built-in .c.a' suffix rule. We feel that it is cleaner for a rule without commands to always simply add to the dependency list for the target. The above example can be easily rewritten to get the desired behavior in GNU make: .c.a: ;  • Some versions of make invoke the shell with the -e' flag, except under -k' (see section Testing the Compilation of a Program). The -e' flag tells the shell to exit as soon as any program it runs returns a nonzero status. We feel it is cleaner to write each shell command line to stand on its own and not require this special treatment. # Makefile Conventions This chapter describes conventions for writing the Makefiles for GNU programs. ## General Conventions for Makefiles Every Makefile should contain this line: SHELL = /bin/sh  to avoid trouble on systems where the SHELL variable might be inherited from the environment. (This is never a problem with GNU make.) Different make programs have incompatible suffix lists and implicit rules, and this sometimes creates confusion or misbehavior. So it is a good idea to set the suffix list explicitly using only the suffixes you need in the particular Makefile, like this: .SUFFIXES: .SUFFIXES: .c .o  The first line clears out the suffix list, the second introduces all suffixes which may be subject to implicit rules in this Makefile. Don't assume that .' is in the path for command execution. When you need to run programs that are a part of your package during the make, please make sure that it uses ./' if the program is built as part of the make or (srcdir)/' if the file is an unchanging part of the source code. Without one of these prefixes, the current search path is used. The distinction between ./' (the build directory) and (srcdir)/' (the source directory) is important because users can build in a separate directory using the --srcdir' option to configure'. A rule of the form: foo.1 : foo.man sedscript sed -e sedscript foo.man > foo.1  will fail when the build directory is not the source directory, because foo.man' and sedscript' are in the the source directory. When using GNU make, relying on VPATH' to find the source file will work in the case where there is a single dependency file, since the make automatic variable <' will represent the source file wherever it is. (Many versions of make set <' only in implicit rules.) A Makefile target like foo.o : bar.c (CC) -I. -I(srcdir) (CFLAGS) -c bar.c -o foo.o  should instead be written as foo.o : bar.c (CC) -I. -I(srcdir) (CFLAGS) -c < -o @  in order to allow VPATH' to work correctly. When the target has multiple dependencies, using an explicit (srcdir)' is the easiest way to make the rule work well. For example, the target above for foo.1' is best written as: foo.1 : foo.man sedscript sed -e (srcdir)/sedscript (srcdir)/foo.man > @  GNU distributions usually contain some files which are not source files--for example, Info files, and the output from Autoconf, Automake, Bison or Flex. Since these files normally appear in the source directory, they should always appear in the source directory, not in the build directory. So Makefile rules to update them should put the updated files in the source directory. However, if a file does not appear in the distribution, then the Makefile should not put it in the source directory, because building a program in ordinary circumstances should not modify the source directory in any way. Try to make the build and installation targets, at least (and all their subtargets) work correctly with a parallel make. ## Utilities in Makefiles Write the Makefile commands (and any shell scripts, such as configure) to run in sh, not in csh. Don't use any special features of ksh or bash. The configure script and the Makefile rules for building and installation should not use any utilities directly except these: cat cmp cp diff echo egrep expr false grep install-info ln ls mkdir mv pwd rm rmdir sed sleep sort tar test touch true  The compression program gzip can be used in the dist rule. Stick to the generally supported options for these programs. For example, don't use mkdir -p', convenient as it may be, because most systems don't support it. It is a good idea to avoid creating symbolic links in makefiles, since a few systems don't support them. The Makefile rules for building and installation can also use compilers and related programs, but should do so via make variables so that the user can substitute alternatives. Here are some of the programs we mean: ar bison cc flex install ld ldconfig lex make makeinfo ranlib texi2dvi yacc  Use the following make variables to run those programs: (AR) (BISON) (CC) (FLEX) (INSTALL) (LD) (LDCONFIG) (LEX) (MAKE) (MAKEINFO) (RANLIB) (TEXI2DVI) (YACC)  When you use ranlib or ldconfig, you should make sure nothing bad happens if the system does not have the program in question. Arrange to ignore an error from that command, and print a message before the command to tell the user that failure of this command does not mean a problem. (The Autoconf AC_PROG_RANLIB' macro can help with this.) If you use symbolic links, you should implement a fallback for systems that don't have symbolic links. Additional utilities that can be used via Make variables are: chgrp chmod chown mknod  It is ok to use other utilities in Makefile portions (or scripts) intended only for particular systems where you know those utilities exist. ## Variables for Specifying Commands Makefiles should provide variables for overriding certain commands, options, and so on. In particular, you should run most utility programs via variables. Thus, if you use Bison, have a variable named BISON whose default value is set with BISON = bison', and refer to it with (BISON) whenever you need to use Bison. File management utilities such as ln, rm, mv, and so on, need not be referred to through variables in this way, since users don't need to replace them with other programs. Each program-name variable should come with an options variable that is used to supply options to the program. Append FLAGS' to the program-name variable name to get the options variable name--for example, BISONFLAGS. (The names CFLAGS for the C compiler, YFLAGS for yacc, and LFLAGS for lex, are exceptions to this rule, but we keep them because they are standard.) Use CPPFLAGS in any compilation command that runs the preprocessor, and use LDFLAGS in any compilation command that does linking as well as in any direct use of ld. If there are C compiler options that must be used for proper compilation of certain files, do not include them in CFLAGS. Users expect to be able to specify CFLAGS freely themselves. Instead, arrange to pass the necessary options to the C compiler independently of CFLAGS, by writing them explicitly in the compilation commands or by defining an implicit rule, like this: CFLAGS = -g ALL_CFLAGS = -I. (CFLAGS) .c.o: (CC) -c (CPPFLAGS) (ALL_CFLAGS) <  Do include the -g' option in CFLAGS, because that is not required for proper compilation. You can consider it a default that is only recommended. If the package is set up so that it is compiled with GCC by default, then you might as well include -O' in the default value of CFLAGS as well. Put CFLAGS last in the compilation command, after other variables containing compiler options, so the user can use CFLAGS to override the others. CFLAGS should be used in every invocation of the C compiler, both those which do compilation and those which do linking. Every Makefile should define the variable INSTALL, which is the basic command for installing a file into the system. Every Makefile should also define the variables INSTALL_PROGRAM and INSTALL_DATA. (The default for each of these should be (INSTALL).) Then it should use those variables as the commands for actual installation, for executables and nonexecutables respectively. Use these variables as follows: (INSTALL_PROGRAM) foo (bindir)/foo (INSTALL_DATA) libfoo.a (libdir)/libfoo.a  Always use a file name, not a directory name, as the second argument of the installation commands. Use a separate command for each file to be installed. ## Variables for Installation Directories Installation directories should always be named by variables, so it is easy to install in a nonstandard place. The standard names for these variables are described below. They are based on a standard filesystem layout; variants of it are used in SVR4, 4.4BSD, Linux, Ultrix v4, and other modern operating systems. These two variables set the root for the installation. All the other installation directories should be subdirectories of one of these two, and nothing should be directly installed into these two directories. prefix' A prefix used in constructing the default values of the variables listed below. The default value of prefix should be /usr/local'. When building the complete GNU system, the prefix will be empty and /usr' will be a symbolic link to /'. (If you are using Autoconf, write it as @prefix@'.) exec_prefix' A prefix used in constructing the default values of some of the variables listed below. The default value of exec_prefix should be (prefix). (If you are using Autoconf, write it as @exec_prefix@'.) Generally, (exec_prefix) is used for directories that contain machine-specific files (such as executables and subroutine libraries), while (prefix) is used directly for other directories. Executable programs are installed in one of the following directories. bindir' The directory for installing executable programs that users can run. This should normally be /usr/local/bin', but write it as (exec_prefix)/bin'. (If you are using Autoconf, write it as @bindir@'.) sbindir' The directory for installing executable programs that can be run from the shell, but are only generally useful to system administrators. This should normally be /usr/local/sbin', but write it as (exec_prefix)/sbin'. (If you are using Autoconf, write it as @sbindir@'.) libexecdir' The directory for installing executable programs to be run by other programs rather than by users. This directory should normally be /usr/local/libexec', but write it as (exec_prefix)/libexec'. (If you are using Autoconf, write it as @libexecdir@'.) Data files used by the program during its execution are divided into categories in two ways. • Some files are normally modified by programs; others are never normally modified (though users may edit some of these). • Some files are architecture-independent and can be shared by all machines at a site; some are architecture-dependent and can be shared only by machines of the same kind and operating system; others may never be shared between two machines. This makes for six different possibilities. However, we want to discourage the use of architecture-dependent files, aside from object files and libraries. It is much cleaner to make other data files architecture-independent, and it is generally not hard. Therefore, here are the variables Makefiles should use to specify directories: datadir' The directory for installing read-only architecture independent data files. This should normally be /usr/local/share', but write it as (prefix)/share'. (If you are using Autoconf, write it as @datadir@'.) As a special exception, see (infodir)' and (includedir)' below. sysconfdir' The directory for installing read-only data files that pertain to a single machine--that is to say, files for configuring a host. Mailer and network configuration files, /etc/passwd', and so forth belong here. All the files in this directory should be ordinary ASCII text files. This directory should normally be /usr/local/etc', but write it as (prefix)/etc'. (If you are using Autoconf, write it as @sysconfdir@'.) Do not install executables here in this directory (they probably belong in (libexecdir)' or (sbindir)'). Also do not install files that are modified in the normal course of their use (programs whose purpose is to change the configuration of the system excluded). Those probably belong in (localstatedir)'. sharedstatedir' The directory for installing architecture-independent data files which the programs modify while they run. This should normally be /usr/local/com', but write it as (prefix)/com'. (If you are using Autoconf, write it as @sharedstatedir@'.) localstatedir' The directory for installing data files which the programs modify while they run, and that pertain to one specific machine. Users should never need to modify files in this directory to configure the package's operation; put such configuration information in separate files that go in (datadir)' or (sysconfdir)'. (localstatedir)' should normally be /usr/local/var', but write it as (prefix)/var'. (If you are using Autoconf, write it as @localstatedir@'.) libdir' The directory for object files and libraries of object code. Do not install executables here, they probably ought to go in (libexecdir)' instead. The value of libdir should normally be /usr/local/lib', but write it as (exec_prefix)/lib'. (If you are using Autoconf, write it as @libdir@'.) infodir' The directory for installing the Info files for this package. By default, it should be /usr/local/info', but it should be written as (prefix)/info'. (If you are using Autoconf, write it as @infodir@'.) lispdir' The directory for installing any Emacs Lisp files in this package. By default, it should be /usr/local/share/emacs/site-lisp', but it should be written as (prefix)/share/emacs/site-lisp'. If you are using Autoconf, write the default as @lispdir@'. In order to make @lispdir@' work, you need the following lines in your configure.in' file: lispdir='{datadir}/emacs/site-lisp' AC_SUBST(lispdir)  includedir' The directory for installing header files to be included by user programs with the C #include' preprocessor directive. This should normally be /usr/local/include', but write it as (prefix)/include'. (If you are using Autoconf, write it as @includedir@'.) Most compilers other than GCC do not look for header files in directory /usr/local/include'. So installing the header files this way is only useful with GCC. Sometimes this is not a problem because some libraries are only really intended to work with GCC. But some libraries are intended to work with other compilers. They should install their header files in two places, one specified by includedir and one specified by oldincludedir. oldincludedir' The directory for installing #include' header files for use with compilers other than GCC. This should normally be /usr/include'. (If you are using Autoconf, you can write it as @oldincludedir@'.) The Makefile commands should check whether the value of oldincludedir is empty. If it is, they should not try to use it; they should cancel the second installation of the header files. A package should not replace an existing header in this directory unless the header came from the same package. Thus, if your Foo package provides a header file foo.h', then it should install the header file in the oldincludedir directory if either (1) there is no foo.h' there or (2) the foo.h' that exists came from the Foo package. To tell whether foo.h' came from the Foo package, put a magic string in the file--part of a comment--and grep for that string. Unix-style man pages are installed in one of the following: mandir' The top-level directory for installing the man pages (if any) for this package. It will normally be /usr/local/man', but you should write it as (prefix)/man'. (If you are using Autoconf, write it as @mandir@'.) man1dir' The directory for installing section 1 man pages. Write it as (mandir)/man1'. man2dir' The directory for installing section 2 man pages. Write it as (mandir)/man2' ...' Don't make the primary documentation for any GNU software be a man page. Write a manual in Texinfo instead. Man pages are just for the sake of people running GNU software on Unix, which is a secondary application only. manext' The file name extension for the installed man page. This should contain a period followed by the appropriate digit; it should normally be .1'. man1ext' The file name extension for installed section 1 man pages. man2ext' The file name extension for installed section 2 man pages. ...' Use these names instead of manext' if the package needs to install man pages in more than one section of the manual. And finally, you should set the following variable: srcdir' The directory for the sources being compiled. The value of this variable is normally inserted by the configure shell script. (If you are using Autconf, use srcdir = @srcdir@'.) For example: # Common prefix for installation directories. # NOTE: This directory must exist when you start the install. prefix = /usr/local exec_prefix = (prefix) # Where to put the executable for the command gcc'. bindir = (exec_prefix)/bin # Where to put the directories used by the compiler. libexecdir = (exec_prefix)/libexec # Where to put the Info files. infodir = (prefix)/info  If your program installs a large number of files into one of the standard user-specified directories, it might be useful to group them into a subdirectory particular to that program. If you do this, you should write the install rule to create these subdirectories. Do not expect the user to include the subdirectory name in the value of any of the variables listed above. The idea of having a uniform set of variable names for installation directories is to enable the user to specify the exact same values for several different GNU packages. In order for this to be useful, all the packages must be designed so that they will work sensibly when the user does so. ## Standard Targets for Users All GNU programs should have the following targets in their Makefiles: all' Compile the entire program. This should be the default target. This target need not rebuild any documentation files; Info files should normally be included in the distribution, and DVI files should be made only when explicitly asked for. By default, the Make rules should compile and link with -g', so that executable programs have debugging symbols. Users who don't mind being helpless can strip the executables later if they wish. install' Compile the program and copy the executables, libraries, and so on to the file names where they should reside for actual use. If there is a simple test to verify that a program is properly installed, this target should run that test. Do not strip executables when installing them. Devil-may-care users can use the install-strip target to do that. If possible, write the install target rule so that it does not modify anything in the directory where the program was built, provided make all' has just been done. This is convenient for building the program under one user name and installing it under another. The commands should create all the directories in which files are to be installed, if they don't already exist. This includes the directories specified as the values of the variables prefix and exec_prefix, as well as all subdirectories that are needed. One way to do this is by means of an installdirs target as described below. Use -' before any command for installing a man page, so that make will ignore any errors. This is in case there are systems that don't have the Unix man page documentation system installed. The way to install Info files is to copy them into (infodir)' with (INSTALL_DATA) (see section Variables for Specifying Commands), and then run the install-info program if it is present. install-info is a program that edits the Info dir' file to add or update the menu entry for the given Info file; it is part of the Texinfo package. Here is a sample rule to install an Info file: (infodir)/foo.info: foo.info (POST_INSTALL) # There may be a newer info file in . than in srcdir. -if test -f foo.info; then d=.; \ else d=(srcdir); fi; \ (INSTALL_DATA)$$d/foo.info $@; \ # Run install-info only if it exists. # Use if' instead of just prepending -' to the # line so we notice real errors from install-info. # We use $(SHELL) -c' because some shells do not
# fail gracefully when there is an unknown command.
if $(SHELL) -c 'install-info --version' \ >/dev/null 2>&1; then \ install-info --dir-file=$(infodir)/dir \
$(infodir)/foo.info; \ else true; fi  When writing the install target, you must classify all the commands into three categories: normal ones, pre-installation commands and post-installation commands. See section Install Command Categories. uninstall' Delete all the installed files--the copies that the install' target creates. This rule should not modify the directories where compilation is done, only the directories where files are installed. The uninstallation commands are divided into three categories, just like the installation commands. See section Install Command Categories. install-strip' Like install, but strip the executable files while installing them. In many cases, the definition of this target can be very simple: install-strip:$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' \ install  Normally we do not recommend stripping an executable unless you are sure the program has no bugs. However, it can be reasonable to install a stripped executable for actual execution while saving the unstripped executable elsewhere in case there is a bug. clean' Delete all files from the current directory that are normally created by building the program. Don't delete the files that record the configuration. Also preserve files that could be made by building, but normally aren't because the distribution comes with them. Delete .dvi' files here if they are not part of the distribution. distclean' Delete all files from the current directory that are created by configuring or building the program. If you have unpacked the source and built the program without creating any other files, make distclean' should leave only the files that were in the distribution. mostlyclean' Like clean', but may refrain from deleting a few files that people normally don't want to recompile. For example, the mostlyclean' target for GCC does not delete libgcc.a', because recompiling it is rarely necessary and takes a lot of time. maintainer-clean' Delete almost everything from the current directory that can be reconstructed with this Makefile. This typically includes everything deleted by distclean, plus more: C source files produced by Bison, tags tables, Info files, and so on. The reason we say "almost everything" is that running the command make maintainer-clean' should not delete configure' even if configure' can be remade using a rule in the Makefile. More generally, make maintainer-clean' should not delete anything that needs to exist in order to run configure' and then begin to build the program. This is the only exception; maintainer-clean should delete everything else that can be rebuilt. The maintainer-clean' target is intended to be used by a maintainer of the package, not by ordinary users. You may need special tools to reconstruct some of the files that make maintainer-clean' deletes. Since these files are normally included in the distribution, we don't take care to make them easy to reconstruct. If you find you need to unpack the full distribution again, don't blame us. To help make users aware of this, the commands for the special maintainer-clean target should start with these two: @echo 'This command is intended for maintainers to use; it' @echo 'deletes files that may need special tools to rebuild.'  TAGS' Update a tags table for this program. info' Generate any Info files needed. The best way to write the rules is as follows: info: foo.info foo.info: foo.texi chap1.texi chap2.texi$(MAKEINFO) $(srcdir)/foo.texi  You must define the variable MAKEINFO in the Makefile. It should run the makeinfo program, which is part of the Texinfo distribution. Normally a GNU distribution comes with Info files, and that means the Info files are present in the source directory. Therefore, the Make rule for an info file should update it in the source directory. When users build the package, ordinarily Make will not update the Info files because they will already be up to date. dvi' Generate DVI files for all Texinfo documentation. For example: dvi: foo.dvi foo.dvi: foo.texi chap1.texi chap2.texi$(TEXI2DVI) $(srcdir)/foo.texi  You must define the variable TEXI2DVI in the Makefile. It should run the program texi2dvi, which is part of the Texinfo distribution.(3) Alternatively, write just the dependencies, and allow GNU make to provide the command. dist' Create a distribution tar file for this program. The tar file should be set up so that the file names in the tar file start with a subdirectory name which is the name of the package it is a distribution for. This name can include the version number. For example, the distribution tar file of GCC version 1.40 unpacks into a subdirectory named gcc-1.40'. The easiest way to do this is to create a subdirectory appropriately named, use ln or cp to install the proper files in it, and then tar that subdirectory. Compress the tar file file with gzip. For example, the actual distribution file for GCC version 1.40 is called gcc-1.40.tar.gz'. The dist target should explicitly depend on all non-source files that are in the distribution, to make sure they are up to date in the distribution. See section Making Releases' in GNU Coding Standards. check' Perform self-tests (if any). The user must build the program before running the tests, but need not install the program; you should write the self-tests so that they work when the program is built but not installed. The following targets are suggested as conventional names, for programs in which they are useful. installcheck Perform installation tests (if any). The user must build and install the program before running the tests. You should not assume that $(bindir)' is in the search path.
installdirs
It's useful to add a target named installdirs' to create the directories where files are installed, and their parent directories. There is a script called mkinstalldirs' which is convenient for this; you can find it in the Texinfo package. You can use a rule like this:
# Make sure all installation directories (e.g. $(bindir)) # actually exist by making them if necessary. installdirs: mkinstalldirs$(srcdir)/mkinstalldirs $(bindir)$(datadir) \
$(libdir)$(infodir) \
$(mandir)  This rule should not modify the directories where compilation is done. It should do nothing but create installation directories. ## Install Command Categories When writing the install target, you must classify all the commands into three categories: normal ones, pre-installation commands and post-installation commands. Normal commands move files into their proper places, and set their modes. They may not alter any files except the ones that come entirely from the package they belong to. Pre-installation and post-installation commands may alter other files; in particular, they can edit global configuration files or data bases. Pre-installation commands are typically executed before the normal commands, and post-installation commands are typically run after the normal commands. The most common use for a post-installation command is to run install-info. This cannot be done with a normal command, since it alters a file (the Info directory) which does not come entirely and solely from the package being installed. It is a post-installation command because it needs to be done after the normal command which installs the package's Info files. Most programs don't need any pre-installation commands, but we have the feature just in case it is needed. To classify the commands in the install rule into these three categories, insert category lines among them. A category line specifies the category for the commands that follow. A category line consists of a tab and a reference to a special Make variable, plus an optional comment at the end. There are three variables you can use, one for each category; the variable name specifies the category. Category lines are no-ops in ordinary execution because these three Make variables are normally undefined (and you should not define them in the makefile). Here are the three possible category lines, each with a comment that explains what it means: $(PRE_INSTALL)     # Pre-install commands follow.
$(POST_INSTALL) # Post-install commands follow.$(NORMAL_INSTALL)  # Normal commands follow.


If you don't use a category line at the beginning of the install rule, all the commands are classified as normal until the first category line. If you don't use any category lines, all the commands are classified as normal.

These are the category lines for uninstall:

        $(PRE_UNINSTALL) # Pre-uninstall commands follow.$(POST_UNINSTALL)    # Post-uninstall commands follow.
$(NORMAL_UNINSTALL) # Normal commands follow.  Typically, a pre-uninstall command would be used for deleting entries from the Info directory. If the install or uninstall target has any dependencies which act as subroutines of installation, then you should start each dependency's commands with a category line, and start the main target's commands with a category line also. This way, you can ensure that each command is placed in the right category regardless of which of the dependencies actually run. Pre-installation and post-installation commands should not run any programs except for these: [ basename bash cat chgrp chmod chown cmp cp dd diff echo egrep expand expr false fgrep find getopt grep gunzip gzip hostname install install-info kill ldconfig ln ls md5sum mkdir mkfifo mknod mv printenv pwd rm rmdir sed sort tee test touch true uname xargs yes  The reason for distinguishing the commands in this way is for the sake of making binary packages. Typically a binary package contains all the executables and other files that need to be installed, and has its own method of installing them--so it does not need to run the normal installation commands. But installing the binary package does need to execute the pre-installation and post-installation commands. Programs to build binary packages work by extracting the pre-installation and post-installation commands. Here is one way of extracting the pre-installation commands: make -n install -o all \ PRE_INSTALL=pre-install \ POST_INSTALL=post-install \ NORMAL_INSTALL=normal-install \ | gawk -f pre-install.awk  where the file pre-install.awk' could contain this: $0 ~ /^\t[ \t]*(normal_install|post_install)[ \t]*$/ {on = 0} on {print$0}
$0 ~ /^\t[ \t]*pre_install[ \t]*$/ {on = 1}


The resulting file of pre-installation commands is executed as a shell script as part of installing the binary package.

# Quick Reference

This appendix summarizes the directives, text manipulation functions, and special variables which GNU make understands. See section Special Built-in Target Names, section Catalogue of Implicit Rules, and section Summary of Options, for other summaries.

Here is a summary of the directives GNU make recognizes:

define variable
endef
Define a multi-line, recursively-expanded variable.
See section Defining Canned Command Sequences.
ifdef variable
ifndef variable
ifeq (a,b)
ifeq "a" "b"
ifeq 'a' 'b'
ifneq (a,b)
ifneq "a" "b"
ifneq 'a' 'b'
else
endif
Conditionally evaluate part of the makefile.
See section Conditional Parts of Makefiles.
include file
Include another makefile.
See section Including Other Makefiles.
override variable = value
override variable := value
override variable += value
override define variable
endef
Define a variable, overriding any previous definition, even one from the command line.
See section The override Directive.
export
Tell make to export all variables to child processes by default.
See section Communicating Variables to a Sub-make.
export variable
export variable = value
export variable := value
export variable += value
unexport variable
Tell make whether or not to export a particular variable to child processes.
See section Communicating Variables to a Sub-make.
vpath pattern path
Specify a search path for files matching a %' pattern.
See section The vpath Directive.
vpath pattern
Remove all search paths previously specified for pattern.
vpath
Remove all search paths previously specified in any vpath directive.

Here is a summary of the text manipulation functions (see section Functions for Transforming Text):

$(subst from,to,text) Replace from with to in text. See section Functions for String Substitution and Analysis. $(patsubst pattern,replacement,text)
Replace words matching pattern with replacement in text.
See section Functions for String Substitution and Analysis.
$(strip string) Remove excess whitespace characters from string. See section Functions for String Substitution and Analysis. $(findstring find,text)
Locate find in text.
See section Functions for String Substitution and Analysis.
$(filter pattern...,text) Select words in text that match one of the pattern words. See section Functions for String Substitution and Analysis. $(filter-out pattern...,text)
Select words in text that do not match any of the pattern words.
See section Functions for String Substitution and Analysis.
$(sort list) Sort the words in list lexicographically, removing duplicates. See section Functions for String Substitution and Analysis. $(dir names...)
Extract the directory part of each file name.
See section Functions for File Names.
$(notdir names...) Extract the non-directory part of each file name. See section Functions for File Names. $(suffix names...)
Extract the suffix (the last .' and following characters) of each file name.
See section Functions for File Names.
$(basename names...) Extract the base name (name without suffix) of each file name. See section Functions for File Names. $(addsuffix suffix,names...)
Append suffix to each word in names.
See section Functions for File Names.
$(addprefix prefix,names...) Prepend prefix to each word in names. See section Functions for File Names. $(join list1,list2)
Join two parallel lists of words.
See section Functions for File Names.
$(word n,text) Extract the nth word (one-origin) of text. See section Functions for File Names. $(words text)
Count the number of words in text.
See section Functions for File Names.
$(firstword names...) Extract the first word of names. See section Functions for File Names. $(wildcard pattern...)
Find file names matching a shell file name pattern (not a %' pattern).
See section The Function wildcard.
$(shell command) Execute a shell command and return its output. See section The shell Function. $(origin variable)
Return a string describing how the make variable variable was defined.
See section The origin Function.
$(foreach var,words,text) Evaluate text with var bound to each word in words, and concatenate the results. See section The foreach Function. Here is a summary of the automatic variables. See section Automatic Variables, for full information. $@
The file name of the target.
$% The target member name, when the target is an archive member. $<
The name of the first dependency.
$? The names of all the dependencies that are newer than the target, with spaces between them. For dependencies which are archive members, only the member named is used (see section Using make to Update Archive Files). $^
$+ The names of all the dependencies, with spaces between them. For dependencies which are archive members, only the member named is used (see section Using make to Update Archive Files). The value of $^ omits duplicate dependencies, while $+ retains them and preserves their order. $*
The stem with which an implicit rule matches (see section How Patterns Match).
$(@D) $(@F)
The directory part and the file-within-directory part of $@. $(*D)
$(*F) The directory part and the file-within-directory part of $*.
$(%D) $(%F)
The directory part and the file-within-directory part of $%. $(<D)
$(<F) The directory part and the file-within-directory part of $<.
$(^D) $(^F)
The directory part and the file-within-directory part of $^. $(+D)
$(+F) The directory part and the file-within-directory part of $+.
$(?D) $(?F)
The directory part and the file-within-directory part of $?. These variables are used specially by GNU make: MAKEFILES Makefiles to be read on every invocation of make. See section The Variable MAKEFILES. VPATH Directory search path for files not found in the current directory. See section VPATH: Search Path for All Dependencies. SHELL The name of the system default command interpreter, usually /bin/sh'. You can set SHELL in the makefile to change the shell used to run commands. See section Command Execution. MAKESHELL On MS-DOS only, the name of the command interpreter that is to be used by make. This value takes precedence over the value of SHELL. See section Command Execution. MAKE The name with which make was invoked. Using this variable in commands has special meaning. See section How the MAKE Variable Works. MAKELEVEL The number of levels of recursion (sub-makes). See section Communicating Variables to a Sub-make. MAKEFLAGS The flags given to make. You can set this in the environment or a makefile to set flags. See section Communicating Options to a Sub-make. MAKECMDGOALS The targets given to make on the command line. Setting this variable has no effect on the operation of make. See section Arguments to Specify the Goals. CURDIR Set to the pathname of the current working directory (after all -C options are processed, if any). Setting this variable has no effect on the operation of make. See section Recursive Use of make. SUFFIXES The default list of suffixes before make reads any makefiles. # Errors Generated by Make Here is a list of the most common errors you might see generated by make, and some information about what they mean and how to fix them. Sometimes make errors are not fatal, especially in the presence of a - prefix on a command script line, or the -k command line option. Errors that are fatal are prefixed with the string ***. Error messages are all either prefixed with the name of the program (usually make'), or, if the error is found in a makefile, the name of the file and linenumber containing the problem. In the table below, these common prefixes are left off. [foo] Error NN' [foo] signal description' These errors are not really make errors at all. They mean that a program that make invoked as part of a command script returned a non-0 error code (Error NN'), which make interprets as failure, or it exited in some other abnormal fashion (with a signal of some type). If no *** is attached to the message, then the subprocess failed but the rule in the makefile was prefixed with the - special character, so make ignored the error. missing separator. Stop.' This is make's generic "Huh?" error message. It means that make was completely unsuccessful at parsing this line of your makefile. It basically means "syntax error". One of the most common reasons for this message is that you (or perhaps your oh-so-helpful editor, as is the case with many MS-Windows editors) have attempted to indent your command scripts with spaces instead of a TAB character. Remember that every line in the command script must begin with a TAB character. Eight spaces do not count. commands commence before first target. Stop.' missing rule before commands. Stop.' This means the first thing in the makefile seems to be part of a command script: it begins with a TAB character and doesn't appear to be a legal make command (such as a variable assignment). Command scripts must always be associated with a target. The second form is generated if the line has a semicolon as the first non-whitespace character; make interprets this to mean you left out the "target: dependency" section of a rule. No rule to make target xxx'.' No rule to make target xxx', needed by yyy'.' This means that make decided it needed to build a target, but then couldn't find any instructions in the makefile on how to do that, either explicit or implicit (including in the default rules database). If you want that file to be built, you will need to add a rule to your makefile describing how that target can be built. Other possible sources of this problem are typos in the makefile (if that filename is wrong) or a corrupted source tree (if that file is not supposed to be built, but rather only a dependency). No targets specified and no makefile found. Stop.' No targets. Stop.' The former means that you didn't provide any targets to be built on the command line, and make couldn't find any makefiles to read in. The latter means that some makefile was found, but it didn't contain any default target and none was given on the command line. GNU make has nothing to do in these situations. Makefile xxx' was not found.' Included makefile xxx' was not found.' A makefile specified on the command line (first form) or included (second form) was not found. warning: overriding commands for target xxx'' warning: ignoring old commands for target xxx'' GNU make allows commands to be specified only once per target (except for double-colon rules). If you give commands for a target which already has been defined to have commands, this warning is issued and the second set of commands will overwrite the first set. Circular xxx <- yyy dependency dropped.' This means that make detected a loop in the dependency graph: after tracing the dependency yyy of target xxx, and its dependencies, etc., one of them depended on xxx again. Recursive variable xxx' references itself (eventually). Stop.' This means you've defined a normal (recursive) make variable xxx that, when its expanded, will refer to itself (xxx). This is not allowed; either use simply-expanded variables (:=) or use the append operator (+=). Unterminated variable reference. Stop.' This means you forgot to provide the proper closing parenthesis or brace in your variable or function reference. insufficient arguments to function xxx'. Stop.' This means you haven't provided the requisite number of arguments for this function. See the documentation of the function for a description of its arguments. missing target pattern. Stop.' multiple target patterns. Stop.' target pattern contains no %'. Stop.' These are generated for malformed static pattern rules. The first means there's no pattern in the target section of the rule, the second means there are multiple patterns in the target section, and the third means the target doesn't contain a pattern character (%). # Complex Makefile Example Here is the makefile for the GNU tar program. This is a moderately complex makefile. Because it is the first target, the default goal is all'. An interesting feature of this makefile is that testpad.h' is a source file automatically created by the testpad program, itself compiled from testpad.c'. If you type make' or make all', then make creates the tar' executable, the rmt' daemon that provides remote tape access, and the tar.info' Info file. If you type make install', then make not only creates tar', rmt', and tar.info', but also installs them. If you type make clean', then make removes the .o' files, and the tar', rmt', testpad', testpad.h', and core' files. If you type make distclean', then make not only removes the same files as does make clean' but also the TAGS', Makefile', and config.status' files. (Although it is not evident, this makefile (and config.status') is generated by the user with the configure program, which is provided in the tar distribution, but is not shown here.) If you type make realclean', then make removes the same files as does make distclean' and also removes the Info files generated from tar.texinfo'. In addition, there are targets shar and dist that create distribution kits. # Generated automatically from Makefile.in by configure. # Un*x Makefile for GNU tar program. # Copyright (C) 1991 Free Software Foundation, Inc. # This program is free software; you can redistribute # it and/or modify it under the terms of the GNU # General Public License ... ... ... SHELL = /bin/sh #### Start of system configuration section. #### srcdir = . # If you use gcc, you should either run the # fixincludes script that comes with it or else use # gcc with the -traditional option. Otherwise ioctl # calls will be compiled incorrectly on some systems. CC = gcc -O YACC = bison -y INSTALL = /usr/local/bin/install -c INSTALLDATA = /usr/local/bin/install -c -m 644 # Things you might add to DEFS: # -DSTDC_HEADERS If you have ANSI C headers and # libraries. # -DPOSIX If you have POSIX.1 headers and # libraries. # -DBSD42 If you have sys/dir.h (unless # you use -DPOSIX), sys/file.h, # and st_blocks in struct stat'. # -DUSG If you have System V/ANSI C # string and memory functions # and headers, sys/sysmacros.h, # fcntl.h, getcwd, no valloc, # and ndir.h (unless # you use -DDIRENT). # -DNO_MEMORY_H If USG or STDC_HEADERS but do not # include memory.h. # -DDIRENT If USG and you have dirent.h # instead of ndir.h. # -DSIGTYPE=int If your signal handlers # return int, not void. # -DNO_MTIO If you lack sys/mtio.h # (magtape ioctls). # -DNO_REMOTE If you do not have a remote shell # or rexec. # -DUSE_REXEC To use rexec for remote tape # operations instead of # forking rsh or remsh. # -DVPRINTF_MISSING If you lack vprintf function # (but have _doprnt). # -DDOPRNT_MISSING If you lack _doprnt function. # Also need to define # -DVPRINTF_MISSING. # -DFTIME_MISSING If you lack ftime system call. # -DSTRSTR_MISSING If you lack strstr function. # -DVALLOC_MISSING If you lack valloc function. # -DMKDIR_MISSING If you lack mkdir and # rmdir system calls. # -DRENAME_MISSING If you lack rename system call. # -DFTRUNCATE_MISSING If you lack ftruncate # system call. # -DV7 On Version 7 Unix (not # tested in a long time). # -DEMUL_OPEN3 If you lack a 3-argument version # of open, and want to emulate it # with system calls you do have. # -DNO_OPEN3 If you lack the 3-argument open # and want to disable the tar -k # option instead of emulating open. # -DXENIX If you have sys/inode.h # and need it 94 to be included. DEFS = -DSIGTYPE=int -DDIRENT -DSTRSTR_MISSING \ -DVPRINTF_MISSING -DBSD42 # Set this to rtapelib.o unless you defined NO_REMOTE, # in which case make it empty. RTAPELIB = rtapelib.o LIBS = DEF_AR_FILE = /dev/rmt8 DEFBLOCKING = 20 CDEBUG = -g CFLAGS =$(CDEBUG) -I. -I$(srcdir)$(DEFS) \
-DDEF_AR_FILE=\"$(DEF_AR_FILE)\" \ -DDEFBLOCKING=$(DEFBLOCKING)
LDFLAGS = -g

prefix = /usr/local
# Prefix for each installed program,
# normally empty or g'.
binprefix =

# The directory to install tar in.
bindir = $(prefix)/bin # The directory to install the info files in. infodir =$(prefix)/info

#### End of system configuration section. ####

SRC1 =  tar.c create.c extract.c buffer.c \
getoldopt.c update.c gnu.c mangle.c
SRC2 =  version.c list.c names.c diffarch.c \
port.c wildmat.c getopt.c
SRC3 =  getopt1.c regex.c getdate.y
SRCS =  $(SRC1)$(SRC2) $(SRC3) OBJ1 = tar.o create.o extract.o buffer.o \ getoldopt.o update.o gnu.o mangle.o OBJ2 = version.o list.o names.o diffarch.o \ port.o wildmat.o getopt.o OBJ3 = getopt1.o regex.o getdate.o$(RTAPELIB)
OBJS =  $(OBJ1)$(OBJ2) $(OBJ3) AUX = README COPYING ChangeLog Makefile.in \ makefile.pc configure configure.in \ tar.texinfo tar.info* texinfo.tex \ tar.h port.h open3.h getopt.h regex.h \ rmt.h rmt.c rtapelib.c alloca.c \ msd_dir.h msd_dir.c tcexparg.c \ level-0 level-1 backup-specs testpad.c all: tar rmt tar.info tar:$(OBJS)
$(CC)$(LDFLAGS) -o $@$(OBJS) $(LIBS) rmt: rmt.c$(CC) $(CFLAGS)$(LDFLAGS) -o $@ rmt.c tar.info: tar.texinfo makeinfo tar.texinfo install: all$(INSTALL) tar $(bindir)/$(binprefix)tar
-test ! -f rmt || $(INSTALL) rmt /etc/rmt$(INSTALLDATA) $(srcdir)/tar.info*$(infodir)

$(OBJS): tar.h port.h testpad.h regex.o buffer.o tar.o: regex.h # getdate.y has 8 shift/reduce conflicts. testpad.h: testpad ./testpad testpad: testpad.o$(CC) -o $@ testpad.o TAGS:$(SRCS)
etags $(SRCS) clean: rm -f *.o tar rmt testpad testpad.h core distclean: clean rm -f TAGS Makefile config.status realclean: distclean rm -f tar.info* shar:$(SRCS) $(AUX) shar$(SRCS) $(AUX) | compress \ > tar-sed -e '/version_string/!d' \ -e 's/[^0-9.]*$$[0-9.]*$$.*/\1/' \ -e q version.c.shar.Z dist:$(SRCS) $(AUX) echo tar-sed \ -e '/version_string/!d' \ -e 's/[^0-9.]*$$[0-9.]*$$.*/\1/' \ -e q version.c > .fname -rm -rf cat .fname mkdir cat .fname ln$(SRCS) $(AUX) cat .fname -rm -rf cat .fname .fname tar chZf cat .fname.tar.Z cat .fname tar.zoo:$(SRCS) $(AUX) -rm -rf tmp.dir -mkdir tmp.dir -rm tar.zoo for X in$(SRCS) $(AUX) ; do \ echo $$X ; \ sed 's/$$/^M/' $$X \ > tmp.dir/$$X ; done cd tmp.dir ; zoo aM ../tar.zoo * -rm -rf tmp.dir  # Index of Concepts Jump to: # -$ - % - * - + - , - - - . - : - = - ? - @ - [ - \ - _ - a - b - c - d - e - f - g - h - i - j - k - l - m - n - o - p - q - r - s - t - u - v - w - y - ~

## #

• # (comments), in commands
• # (comments), in makefile
• #include
• ## $• $, in function call
• $, in rules • $, in variable name
• $, in variable reference • ## % • %, in pattern rules • %, quoting in static pattern • %, quoting in patsubst • %, quoting in vpath • %, quoting with \ (backslash), %, quoting with \ (backslash), %, quoting with \ (backslash) • ## * • * (wildcard character) • ## + • +, and define • += • ## , • ,v (RCS file extension) • ## - • - (in commands) • -, and define • --assume-new, --assume-new • --assume-new, and recursion • --assume-old, --assume-old • --assume-old, and recursion • --debug • --directory, --directory • --directory, and recursion • --directory, and --print-directory • --dry-run, --dry-run, --dry-run • --environment-overrides • --file, --file, --file • --file, and recursion • --help • --ignore-errors, --ignore-errors • --include-dir, --include-dir • --jobs, --jobs • --jobs, and recursion • --just-print, --just-print, --just-print • --keep-going, --keep-going, --keep-going • --load-average, --load-average • --makefile, --makefile, --makefile • --max-load, --max-load • --new-file, --new-file • --new-file, and recursion • --no-builtin-rules • --no-keep-going • --no-print-directory, --no-print-directory • --old-file, --old-file • --old-file, and recursion • --print-data-base • --print-directory • --print-directory, and recursion • --print-directory, disabling • --print-directory, and --directory • --question, --question • --quiet, --quiet • --recon, --recon, --recon • --silent, --silent • --stop • --touch, --touch • --touch, and recursion • --version • --warn-undefined-variables • --what-if, --what-if • -b • -C, -C • -C, and recursion • -C, and -w • -d • -e • -e (shell flag) • -f, -f, -f • -f, and recursion • -h • -I, -I • -i, -i • -j, -j • -j, and archive update • -j, and recursion • -k, -k, -k • -l • -l (library search) • -l (load average) • -m • -M (to compiler) • -MM (to GNU compiler) • -n, -n, -n • -o, -o • -o, and recursion • -p • -q, -q • -r • -S • -s, -s • -t, -t • -t, and recursion • -v • -W, -W • -w • -W, and recursion • -w, and recursion • -w, disabling • -w, and -C • ## . • .a (archives) • .C • .c • .cc • .ch • .d • .def • .dvi • .F • .f • .info • .l • .ln • .mod • .o, .o • .p • .PRECIOUS intermediate files • .r • .S • .s • .sh • .sym • .tex • .texi • .texinfo • .txinfo • .w • .web • .y • ## : • :: rules (double-colon) • :=, := • ## = • =, = • ## ? • ? (wildcard character) • ?=, ?= • ## @ • @ (in commands) • @, and define • ## [ • [...] (wildcard characters) • ## \ • \ (backslash), for continuation lines • \ (backslash), in commands • \ (backslash), to quote %, \ (backslash), to quote %, \ (backslash), to quote % • ## _ • __.SYMDEF • ## a • algorithm for directory search • all (standard target) • appending to variables • ar • archive • archive member targets • archive symbol directory updating • archive, and -j • archive, and parallel execution • archive, suffix rule for • Arg list too long • arguments of functions • as, as • assembly, rule to compile • automatic generation of dependencies, automatic generation of dependencies • automatic variables • ## b • backquotes • backslash (\), for continuation lines • backslash (\), in commands • backslash (\), to quote %, backslash (\), to quote %, backslash (\), to quote % • backslashes in pathnames and wildcard expansion • basename • binary packages • broken pipe • bugs, reporting • built-in special targets • ## c • C++, rule to compile • C, rule to compile • cc, cc • cd (shell command), cd (shell command) • chains of rules • check (standard target) • clean (standard target) • clean target, clean target • cleaning up • clobber (standard target) • co, co • combining rules by dependency • command line variable definitions, and recursion • command line variables • commands • commands, backslash (\) in • commands, comments in • commands, echoing • commands, empty • commands, errors in • commands, execution • commands, execution in parallel • commands, expansion • commands, how to write • commands, instead of executing • commands, introduction to • commands, quoting newlines in • commands, sequences of • comments, in commands • comments, in makefile • compatibility • compatibility in exporting • compilation, testing • computed variable name • conditional variable assignment • conditionals • continuation lines • conventions for makefiles • ctangle, ctangle • cweave, cweave • ## d • deducing commands (implicit rules) • default directries for included makefiles • default goal, default goal • default makefile name • default rules, last-resort • defining variables verbatim • deletion of target files, deletion of target files • dependencies • dependencies, automatic generation, dependencies, automatic generation • dependencies, introduction to • dependencies, list of all • dependencies, list of changed • dependencies, varying (static pattern) • dependency • dependency pattern, implicit • dependency pattern, static (not implicit) • directive • directories, printing them • directories, updating archive symbol • directory part • directory search (VPATH) • directory search (VPATH), and implicit rules • directory search (VPATH), and link libraries • directory search (VPATH), and shell commands • directory search algorithm • directory search, traditional • dist (standard target) • distclean (standard target) • dollar sign ($), in function call
• dollar sign ($), in rules • dollar sign ($), in variable name
• dollar sign ($), in variable reference • double-colon rules • duplicate words, removing • ## e • E2BIG • echoing of commands • editor • Emacs (M-x compile) • empty commands • empty targets • environment • environment, and recursion • environment, SHELL in • errors (in commands) • errors with wildcards • execution, in parallel • execution, instead of • execution, of commands • exit status (errors) • explicit rule, definition of • exporting variables • ## f • f77, f77 • features of GNU make • features, missing • file name functions • file name of makefile • file name of makefile, how to specify • file name prefix, adding • file name suffix • file name suffix, adding • file name with wildcards • file name, basename of • file name, directory part • file name, nondirectory part • files, assuming new • files, assuming old • files, avoiding recompilation of • files, intermediate • filtering out words • filtering words • finding strings • flags • flags for compilers • flavors of variables • FORCE • force targets • Fortran, rule to compile • functions • functions, for file names • functions, for text • functions, syntax of • ## g • g++, g++ • gcc • generating dependencies automatically, generating dependencies automatically • get, get • globbing (wildcards) • goal • goal, default, goal, default • goal, how to specify • ## h • home directory • ## i • IEEE Standard 1003.2 • implicit rule • implicit rule, and directory search • implicit rule, and VPATH • implicit rule, definition of • implicit rule, how to use • implicit rule, introduction to • implicit rule, predefined • implicit rule, search algorithm • included makefiles, default directries • including (MAKEFILES variable) • including other makefiles • incompatibilities • Info, rule to format • install (standard target) • intermediate files • intermediate files, preserving • intermediate targets, explicit • interrupt • ## j • job slots • job slots, and recursion • jobs, limiting based on load • joining lists of words • ## k • killing (interruption) • ## l • last-resort default rules • ld • lex, lex • Lex, rule to run • libraries for linking, directory search • library archive, suffix rule for • limiting jobs based on load • link libraries, and directory search • linking, predefined rule for • lint • lint, rule to run • list of all dependencies • list of changed dependencies • load average • loops in variable expansion • lpr (shell command), lpr (shell command) • ## m • m2c • macro • make depend • MAKECMDGOALS • makefile • makefile name • makefile name, how to specify • makefile rule parts • makefile, and MAKEFILES variable • makefile, conventions for • makefile, how make processes • makefile, how to write • makefile, including • makefile, overriding • makefile, remaking of • makefile, simple • makeinfo, makeinfo • match-anything rule • match-anything rule, used to override • missing features • mistakes with wildcards • modified variable reference • Modula-2, rule to compile • mostlyclean (standard target) • multiple rules for one target • multiple rules for one target (::) • multiple targets • multiple targets, in pattern rule • ## n • name of makefile • name of makefile, how to specify • nested variable reference • newline, quoting, in commands • newline, quoting, in makefile • nondirectory part • ## o • OBJ • obj • OBJECTS • objects • OBJS • objs • old-fashioned suffix rules • options • options, and recursion • options, setting from environment • options, setting in makefiles • order of pattern rules • origin of variable • overriding makefiles • overriding variables with arguments • overriding with override • ## p • parallel execution • parallel execution, and archive update • parts of makefile rule • Pascal, rule to compile • pattern rule • pattern rules, order of • pattern rules, static (not implicit) • pattern rules, static, syntax of • pattern-specific variables • pc, pc • phony targets • pitfalls of wildcards • portability • POSIX • POSIX.2 • post-installation commands • pre-installation commands • precious targets • prefix, adding • preserving intermediate files • preserving with .PRECIOUS, preserving with .PRECIOUS • preserving with .SECONDARY • print (standard target) • print target, print target • printing directories • printing of commands • problems and bugs, reporting • problems with wildcards • processing a makefile • ## q • question mode • quoting %, in static pattern • quoting %, in patsubst • quoting %, in vpath • quoting newline, in commands • quoting newline, in makefile • ## r • Ratfor, rule to compile • RCS, rule to extract from • README • realclean (standard target) • recompilation • recompilation, avoiding • recording events with empty targets • recursion • recursion, and -C • recursion, and -f • recursion, and -j • recursion, and -o • recursion, and -t • recursion, and -W • recursion, and -w • recursion, and command line variable definitions • recursion, and environment • recursion, and MAKE variable • recursion, and MAKEFILES variable • recursion, and options • recursion, and printing directories • recursion, and variables • recursion, level of • recursive variable expansion, recursive variable expansion • recursively expanded variables • reference to variables, reference to variables • relinking • remaking makefiles • removal of target files, removal of target files • removing duplicate words • removing, to clean up • reporting bugs • rm • rm (shell command), rm (shell command), rm (shell command), rm (shell command) • rule commands • rule dependencies • rule syntax • rule targets • rule, and $
• rule, double-colon (::)
• rule, explicit, definition of
• rule, how to write
• rule, implicit
• rule, implicit, and directory search
• rule, implicit, and VPATH
• rule, implicit, chains of
• rule, implicit, definition of
• rule, implicit, how to use
• rule, implicit, introduction to
• rule, implicit, predefined
• rule, introduction to
• rule, multiple for one target
• rule, no commands or dependencies
• rule, pattern
• rule, static pattern
• rule, static pattern versus implicit
• rule, with multiple targets
• ## s

• s. (SCCS file prefix)
• SCCS, rule to extract from
• search algorithm, implicit rule
• search path for dependencies (VPATH)
• search path for dependencies (VPATH), and implicit rules
• search path for dependencies (VPATH), and link libraries
• searching for strings
• secondary files
• secondary targets
• sed (shell command)
• selecting a word
• selecting word lists
• sequences of commands
• setting options from environment
• setting options in makefiles
• setting variables
• several rules for one target
• several targets in a rule
• shar (standard target)
• shell command
• shell command, and directory search
• shell command, execution
• shell command, function for
• shell file name pattern (in include)
• shell wildcards (in include)
• SHELL, MS-DOS specifics
• signal
• silent operation
• simple makefile
• simple variable expansion
• simplifying with variables
• simply expanded variables
• sorting words
• spaces, in variable values
• spaces, stripping
• special targets
• specifying makefile name
• standard input
• standards conformance
• standards for makefiles
• static pattern rule
• static pattern rule, syntax of
• static pattern rule, versus implicit
• stem, stem
• stem, variable for
• strings, searching for
• stripping whitespace
• sub-make
• subdirectories, recursion for
• substitution variable reference
• suffix rule
• suffix rule, for archive
• suffix, function to find
• suffix, substituting in variables
• switches
• symbol directories, updating archive
• syntax of rules
• ## t

• tab character (in commands)
• tabs in rules
• TAGS (standard target)
• tangle, tangle
• tar (standard target)
• target
• target pattern, implicit
• target pattern, static (not implicit)
• target, deleting on error
• target, deleting on interrupt
• target, multiple in pattern rule
• target, multiple rules for one
• target, touching
• target-specific variables
• targets
• targets without a file
• targets, built-in special
• targets, empty
• targets, force
• targets, introduction to
• targets, multiple
• targets, phony
• terminal rule
• test (standard target)
• testing compilation
• tex, tex
• TeX, rule to run
• texi2dvi, texi2dvi
• Texinfo, rule to format
• tilde (~)
• touch (shell command), touch (shell command)
• touching files
• ## u

• undefined variables, warning message
• updating archive symbol directories
• updating makefiles
• ## v

• value
• value, how a variable gets it
• variable
• variable definition
• variables

## $•$%
• $(%D) •$(%F)
• $(*D) •$(*F)
• $(<D) •$(<F)
• $(?D) •$(?F)
• $(@D) •$(@F)
• $(^D) •$(^F)
• $* •$*, and static pattern
• $+ •$<
• $? •$@
• \$^
• ## %

• % (automatic variable)
• %D (automatic variable)
• %F (automatic variable)
• ## *

• * (automatic variable)
• * (automatic variable), unsupported bizarre usage
• *D (automatic variable)
• *F (automatic variable)
• ## +

• + (automatic variable)
• ## .

• .DEFAULT, .DEFAULT
• .DEFAULT, and empty commands
• .DELETE_ON_ERROR
• .EXPORT_ALL_VARIABLES, .EXPORT_ALL_VARIABLES
• .IGNORE, .IGNORE
• .INTERMEDIATE
• .PHONY, .PHONY
• .POSIX
• .PRECIOUS, .PRECIOUS
• .SECONDARY
• .SILENT, .SILENT
• .SUFFIXES, .SUFFIXES
• ## /

• /usr/gnu/include
• /usr/include
• /usr/local/include
• ## <

• < (automatic variable)
• <D (automatic variable)
• <F (automatic variable)
• ## ?

• ? (automatic variable)
• ?D (automatic variable)
• ?F (automatic variable)
• ## @

• @ (automatic variable)
• @D (automatic variable)
• @F (automatic variable)
• ## ^

• ^ (automatic variable)
• ^D (automatic variable)
• ^F (automatic variable)

• AR
• ARFLAGS
• AS
• ASFLAGS

• basename

• CC
• CFLAGS
• CO
• COFLAGS
• COMSPEC
• CPP
• CPPFLAGS
• CTANGLE
• CWEAVE
• CXX
• CXXFLAGS

• define
• dir

• else
• endef
• endif
• export

• FC
• FFLAGS
• filter
• filter-out
• findstring
• firstword
• foreach

• GET
• GFLAGS
• GNUmakefile
• GPATH

• ifdef
• ifeq
• ifndef
• ifneq
• include

• join

• LDFLAGS
• LEX
• LFLAGS
• ## m

• MAKE, MAKE
• MAKECMDGOALS
• Makefile
• makefile
• MAKEFILES, MAKEFILES
• MAKEFLAGS
• MAKEINFO
• MAKELEVEL, MAKELEVEL
• MAKEOVERRIDES
• MFLAGS

• notdir
• ## o

• origin
• OUTPUT_OPTION
• override
• ## p

• patsubst, patsubst
• PC
• PFLAGS

• RFLAGS
• RM
• ## s

• shell
• SHELL
• SHELL (command execution)
• sort
• strip
• subst, subst
• suffix
• SUFFIXES

• TANGLE
• TEX
• TEXI2DVI

• unexport

• VPATH, VPATH
• vpath, vpath
• ## w

• WEAVE
• wildcard, wildcard
• word
• wordlist
• words

• YACC
• YACCR
• YFLAGS

• # Footnotes

### (1)

GNU Make compiled for MS-DOS and MS-Windows behaves as if prefix has been defined to be the root of the DJGPP tree hierarchy.

### (2)

On MS-DOS, the value of current working directory is global, so changing it will affect the following command lines on those systems.

### (3)

texi2dvi uses TeX to do the real work of formatting. TeX is not distributed with Texinfo.

This document was generated on 7 November 1998 using the texi2html translator version 1.52.